Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Tub Seal and Bearing Kit

★★★★★
★★★★★
10 Reviews
$ 109.66   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3503261
Manufacturer Part Number W10435302
Manufactured by Whirlpool
Product Description

Tub Seal and Bearing Kit Specifications

This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Leaking | Shakes and moves
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Whirlpool, Kenmore.
Part# W10435302 replaces these:
AP5325033
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

15 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
February 22, 2019
The tub shaft & bearing kit....what kind of warranty is on these parts?
For model number W10435302
Hello Diane, Thank you for contacting us. We offer a one year manufacturer warranty on all of the parts on our website. Have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Bonita
May 7, 2018
My problem is the ol code comes on with nothing in the tub. When i try to do a load it washes for about 10 min. Than water is coming in and is going out but it will not advance to the next cycle. Just hums than the ol code comes on
For model number WTW7340XW0
Hello Bonita, thank you for your question. I would recommend replacing the sensor part number WPW10178988. This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. If the sensor isn't working, the unit might be stuck in "unbalanced mode". Try unplugging the unit and leaving it for about 10 minutes, then plugging it back in to see if that resets it. I would also check the tub seal and bearing kit to be sure the tub is turning freely as any corrosion or debris around the bearing and seal can cause the tub to not spin freely. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
November 21, 2018
Is there a video on how to install the bearing kit
For model number MVWB700VQ0
Hi Jim, thank you for your question. Unfortunately we do not have a video for this part and model specifically. However we do have an video on a similar installation that may help you: https://www.youtube.com/watch?v=cWe8YAMM_Ds&t=258s. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Donald
February 6, 2019
My washer stops with about 12 minutes left and the load is not spun out all the way it will not spin no more. Also is very loud when spinning. What parts would you recommend?
For model number Mvwb300wq1
Hello Donald, Thank you for contacting us! I suggest checking the following parts: PS11723155 Basket Hub Kit, PS5136124 Drain Pump, and PS11752033 Washplate. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sharon
January 27, 2020
My Maytag washer is nosy when it run to about 9 min to end 0. What parts do i need to change? Thanks
For model number mvwb300wqo
Hello and thank you for writing. It certainly sounds like it could be a faulty basket hub and/or possibly a malfunctioning tub seal and bearing you should check the part(s) for signs of damage, and replace it as needed. Please see the part links related to this question just beneath this answer. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sharon
January 27, 2020
Thanks for asking my question. Can you please also tell me how to check the parts for signs of damage " faulty basket hub kit or malfunctioning tub seal and bearing" Thanks
For model number MVWB300WQ0
Hello Sharon and thank you for writing. The seal and bearing: Fill up the tub partway, put a little bit of detergent in it and let it just hang out. Check an hour later and there it is. Soapy water on the floor, not so much in the tub. You can also inspect the seal for cracks and missing pieces, being brittle. The hub kit: The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced. You again would need to inspect these plastic parts for missing teeth or broken or cracked pieces. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jerry
July 23, 2019
My wife found that the washer had leaked some oil out on the floor recently, and now it is very loud during the spin cycle. Would you recommend the w10820039 basket hub kit or the w10435302 tub seal and bearing kit for our repair?
For model number WTW8500BW0
Hello Jerry,thank you for your question. We would recommend replacing the tub seal and bearing kit to fix this issue. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Max
November 11, 2019
Would these be the correct parts for my washer bearing set
For model number MVWB725BW0
Hello Max, Thank you for the question. I have researched the model you have provided and have found the Tub Seal and Bearing is only sold as part of the Outer Tub, PartSelect Number PS3503107. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Julio
November 23, 2019
Would these be the correct parts for my washer bearing set for model wtw4930xw1 Ser c14120299
For model number WTW4930XW1
Hi Julio, sadly this is not compatible with WTW4930XW1. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Pete
January 17, 2018
Is there a bearing kit and tub seal kit available for cabrio washer model wtw6700tu1 (2008)? Thanks.
For model number WTW6700TU1
Hi Pete, Thank you for the question.The tub seal and bearings are only sold as part of the Outer Tub Assembly. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 1.9 / 5.0, 4 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Washer was noisy, Top seal and bearing bad
    You better be confident in your repair abilities before you try this. Get the washer to a large open area, like your garage, because there are a lot of parts. Take off the back, pop the top, unsnap and remove the top ring off outer tub, take out the agitator, take out the inner tub, disconnect the pumps and electrical wires, take screw out of rotor on bottom and remove rotor, take out 4 bolts to remove motor magnet ring, and now you may be ready to unhook the outer tub from the 4 supports (springs) and lift it out of the metal frame. Then unscrew the bottom nut on the shaft, use blocks to hold the tub in place, and carefully tap the old shaft and bearings out. The instructions that came with the kit helped. The shaft and top seal comes out the top first. Then you can tap out upper bearing and then the lower bearing and spacers.Instructions called for a special tool to install the bearings but you can carefully tap them in. You will need blocks to support the tub while you tap them. First block under the tub and install top bearing, then flip over and use several blocks to hold tub while you drop the shaft, spacers, and tap lower bearing in. I did not need to tap on the inner ring of the bearings, just the outer ring. Be very careful not to damage the seal in the bearings. That's why you must tap them in careful and slow. Them install the nut on the bottom. You need to hold the shaft with damaging it while you tighten the nut. I used the hard nylon gear from the inner tub which I was replacing with a new one. Then put it all back together.
    • DENNIS from OELWEIN, IA
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
    • Parts Used:
      W10435302
    142 of 153 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Washer was loud during spin cycle and began leaking water from underneath (not either pump)
    I followed a youtube video by Appliance Repairs, 32-34 minutes long that was very thorough.
    • Daryl from Devils Lake, ND
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
    • Parts Used:
      W10435302
    12 of 13 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Replace bearings and seals on shaft
    Watched a couple of videos online to get a good grasp on repair. Opted out of purchasing the bearing press tool $130. Struggled a little, but made the repair. At the very least the wash tub needed a good cleaning
    • Barry from PANAMA CITY, FL
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set
    • Parts Used:
      W10435302
    6 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Bearing
    Taking the full drum apart
    • Rachel from FARMINGVILLE, NY
    • Difficulty Level:
      Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Socket set, Wrench set
    • Parts Used:
      W10447783, W10435302
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      10 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        5
      • 4 Stars
        5
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS3503261
          Manufacturer Part Number: W10435302
          Brand
          Model Number
          Description
          Kenmore
          11027086600
          Washer - RESIDENTIAL WASHER
          Kenmore
          11028103310
          Washer - WASHER
          Maytag
          7MMVWB850WL0
          Washer - AUTOMATIC WASHER
          Maytag
          MTW6300TQ1
          Washer - RESIDENTIAL WASHER
          Maytag
          MVWB300WQ0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB300WQ1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB300WQ2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB400VQ0
          Washer - RESIDENTIAL WASHER
          Maytag
          MVWB450WQ0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB450WQ1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB450WQ2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB455YQ0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB700VQ0
          Washer - RESIDENTIAL WASHER
          Maytag
          MVWB750WB0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WB1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WB2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WL0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WL1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WL2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WQ0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WQ1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WQ2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WR0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WR1
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB750WR2
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB755YL0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB755YQ0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB755YR0
          Washer - AUTOMATIC WASHER
          Maytag
          MVWB800VB0
          Washer - RESIDENTIAL WASHER
          Maytag
          MVWB800VQ0
          Washer - RESIDENTIAL WASHER

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service