Dishwasher Circulation Motor & Pump Kit with Harness 154859101 | Official Frigidaire Part | Fast Shipping | PartSelect
Dishwasher Circulation Motor & Pump Kit with Harness – Part Number: 154859101
Dishwasher Circulation Motor & Pump Kit with Harness – Part Number: 154859101 Dishwasher Circulation Motor & Pump Kit with Harness – Part Number: 154859101 Dishwasher Circulation Motor & Pump Kit with Harness – Part Number: 154859101 Dishwasher Circulation Motor & Pump Kit with Harness – Part Number: 154859101 https://partselectcom.azureedge.net/Schematics/Frigidaire/KEY7T6HN.gif

Dishwasher Circulation Motor & Pump Kit with Harness

Product Description

Dishwasher Circulation Motor & Pump Kit with Harness Specifications

This part has been redesigned by the manufacturer and may appear different, but will function the same. This kit helps propel the water through the spray arms.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Not cleaning dishes properly | Leaking | Noisy | Will Not Start

This part works with the following products:

Dishwasher.

This part works with the following brands:

Frigidaire, Kenmore, Gibson, Uni, Westinghouse, Crosley.

Part # 154859101 replaces these:

154369501, 154395402, 154395403, 154405501, 154418301, 154418302, 154520501, 154523501, 154536101, 154539901, 154574701, 154588402, 154588801, 154859101, 1940277, AP5272389.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 10 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Kurt from Corrales, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
154859101
The dishwasher would not spray to middle or top rack and detergent would not dissolve.
I pulled off the cover inside the sump area. Then pulled the washer out from the counter and turned it on it's side. I took the old pump out and crimped a new wire harness on. It was a simple repair for a DIYer.

Before pushing the dishwasher back, I tested the dishwasher with it pulled out from the counter. It was easy to see water was flowing forcefully through the upper tubing now. Success.

Troubleshooting this faulty pump was harder because it was functioning, but it did not have enough force to push the water up to the top rack. I convinced myself that the pump was the problem by plugging the lower rack with a cork. The spray was still too weak to rotate the upper spray arm. I also ruled out the timer with a stop watch. This unit alternates upper and lower racks by pausing either 0.6 seconds or 3 seconds. This controlls a ball that diverts water to the upper or lower rack.
47 of 52 people found this instruction helpful.
Was this instruction helpful to you?
jeff from Orlando, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
154859101
Frigidaire dishwasher main pump failed
10 year old stainless steel faced Frigidaire dishwasher. The motor assembly part fixed my problem. This was the second part required to fix the dishwasher. A week prior I replaced the inlet water solenoid switch to correct the "no water filling issue". I think that the main motor assembly pump ran dry and caused it to fail, so it is critical NEVER to run this part dry. The repair was relatively easy, I will say it would be great to have some instructions with the parts, however the kit came with everything. you essentially slide the dishwasher out disconnecting power and water ( i left the discharge connected since the service loop was long). you disconnect all the main pump electrical and water connections, labeling made it easy. you take the motor assembly out thru the inside tub. Once the internal sump assembly is out you can clean the sump and remove the old pump. Pull it out straight and dont wiggle it. The kit comes with new O rings that i put a light smear of vaseline on for a good seal. You reinstall the sump and make connections. Since my dishwasher is old, the original Molex power connector to the motor is different on the new motor. The kit comes with a new style connector, what you have to do is snip off your old connector and the kit comes with a new connector with crimps on the ends, you slide the provided heat shrink over each wire and then crimp your dishwashers wires to the new connector. I then used a butane lighter to shrink the heat shrink. The heat shrink is not absolutely necessary since the crimps are insulated, but since the kit came with two perfectly cut pieces of heat shrink I felt obligated to use it. This sounds all complicated but it really wasn't and much cheaper than a new dishwasher! Interestingly and this only maybe in my case but the dishwasher seems to clean better than it ever did.. for now we are not pre-rinsing!
22 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Rod from Bandon, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
154859101
No Water Circulating in Wash or Rinse Cycle
Removed the dishwasher from under the counter, and ran to diagnose the problem. Drain pump ran, but circulating motor did not. Ordered the replacement circ pump / motor assy, and slid the washer back in its hole.
When the new motor arrived, I slid it back out, disconnected everything, and drained the water from the bottom. Then I tipped the washer on its side, removed the old motor and installed the new one following included instructions. I did have to use the new wiring harness, and found the new one had only two leads where the original had three. I connected the blue and white leads, and left the original green loose.
All in all, it was an easy repair that could be done by anyone with a basic set of skills.
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Mark J. from Schwenksville, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
154859101, 154577303
Water leak underside of dishwasher/Noisy pump
Removed bottom front dress plate and ran dishwasher. Noted there was a major leak from pump. Went to website parts list located part and ordered online. Once part arrived removed dishwasher from counter after removeing 2 screws which held it in. Shut off power and water to unit. Unplugged pump wires,removed pump. New pump came with new o-ring seals which I placed on new unit and put Vegitable oil on them for lubrication. Reinstalled unit along with wires. Reinstalled under counter, turned on water/power WORKS GREAT!
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
steven from Walnut Creek, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
154859101, 807145201
Upper rack not being cleaned
This was pretty easy. It was a guess as to the problem, but there much debate , if the water isn't moving it had to be the pump, right?. So i replaced the circulation pump. 2 screws on the top and two trim screws on the bottom, and it slides right out. Then UNPLUG IT.. Take the screen out of the bottom on the inside and make sure you get all the water out or it will end up on the floor when you tip it on it's side. The directions were ok, i looked over them briefly but didn't use them. tools were, phillips srewdriver, torx driver (pump bracket srews) wire stripper/crimper (for the plug adaptor) and a heat gun, (for the heat shrink tube for the crimp connection). Overall it was pretty easy. the pump was made to be easy to replace. 45 min and back in action.
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
David from Cragford, AL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
154859101
Water coming out of motor/motor really loud noise
Took the dishwasher out removed the two screws and the part holding the motor in and removed the motor. Received the parts, places o'rings on the motor, which came with the kit, even though I ordered the two o'rings. Replaced the motor, installed the part that holds the motor and tightened the screws. Cut the old connector off the dishwasher and replaced it with a new connector that came with the kit. Reinstalled the dishwasher, works great. Thanks for your Site.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Vincent from vestal, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
154859101
pump leaking water
slide out dishwasher. remove 2 screws holding motor/pump assembly in. slide out motor/pump bracket. disconnect electrical connection from motor. pull motor/pump assembly out. install new 'O' rings on new motor/pump assembly. (lube with liquid soap). install assembly. slide in motor clamp and install 2 screws. reinstall dishwasher. run test cycle. Fixed!!
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Angela from Heathsville, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
154859101
Motor was making a loud noise and leaking water
Pulled the dishwasher out from under the ounter, laid it flat on the front side, unplugged the motor, removed two screws and the retaining clip, pulled the motor straight out, oiled and put the new o-rings on the new motor, slid it in, replaced the clip and two screws, reinstalled the dishwasher, and done.
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
elizabeth from tucson, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
154859101
leaking motor in mexico and no parts!!
got the part in the usa-flew to home in baja mexico and had the dishwasher fixed in no time!!! Just get Ramon and his toolbox!! thanks!!
6 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Greg from Hemet, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
154859101
major water leak from underneath unit
two screws, and pull unit out from under counter, turn on it's side. Two allen-head screws to remove motor retaining clip, unplug wires, and remove motor. Reassemble, using silicone grease on O-rings that seal motor. That's it.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
4
out of 5
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS3501031
Manufacturer Part Number: 154859101
Brand
Model Number
Description
Kenmore
58714000100
Dishwasher
Kenmore
58714000101
Dishwasher
Kenmore
58714000102
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714001992
Dishwasher
Kenmore
58714001993
Dishwasher
Kenmore
58714002991
Dishwasher
Kenmore
58714002992
Dishwasher
Kenmore
58714002993
Dishwasher
Kenmore
58714003100
Dishwasher
Kenmore
58714008001
Dishwasher
Kenmore
58714008002
Dishwasher
Kenmore
58714008003
Dishwasher
Kenmore
58714009100
Dishwasher
Kenmore
58714009101
Dishwasher
Kenmore
58714009102
Dishwasher
Kenmore
58714112401
Dishwasher
Kenmore
58714113401
Dishwasher
Kenmore
58714114401
Dishwasher
Kenmore
58714119401
Dishwasher
Kenmore
58714131101
Dishwasher
Kenmore
58714131102
Dishwasher
Kenmore
58714132101
Dishwasher
Kenmore
58714132102
Dishwasher
Kenmore
58714134101
Dishwasher
Kenmore
58714134102
Dishwasher
Kenmore
58714139101
Dishwasher
Kenmore
58714139102
Dishwasher
Kenmore
58714153400
Dishwasher
Kenmore
58714153401
Dishwasher