Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kevin W - August 24, 2021
Verified Purchase
Easy repair, great part, worked as expected.
The part was in great condition and came fast. The appliance is up and running.
★★★★★
★★★★★
Jerrod P - September 15, 2020
Verified Purchase
Worked! Easy to install and now the dishwasher is quiet again!!
Hardest part (potentially) is getting the dishwasher out and turning it over. Fortunately mine slid out easily, had long enough connections (water, drain, power) that I didn’t need to disconnect them, and drained water all over the center of my kitchen floor when I tipped it, not back into the dishwasher hole under the counter which would have been harder to mop up. After all that ... the part is super easy to install. 5 minutes, if that. Now the dishwasher is quiet again!
★★★★★
★★★★★
George C - July 16, 2020
Verified Purchase
Exact fit and replacement
The dishwasher is back in perfect working order. The part identification and ordering process was quick and efficient. Price competitive. Received the part 2 days earlier than expected using non-expedited delivery. The 3 minute instructional video on PartSelect website made replacement a simple and easy 2 hour task. And the part was an exact fit including the electrical plug in connections. Thanks for the service PartsSelect.
★★★★★
★★★★★
BRIAN D - April 21, 2020
Verified Purchase
What I needed
Part was correct shipping was fast video was correct
★★★★★
★★★★★
Steven B - December 26, 2018
Verified Purchase
Normal repair taking several hours to do it right.
When I ordered the part the online system stated it was in stock. 4 days later I received an email stating the part was not in stock and that the part would have to be ordered. I received multiple updates on the progress of ordering the part, which was excellent.
The part arrived and was loose inside the box. Upon inspection it was determined that at sometime while the part was in the box, the box had been dropped and cracked the black plastic on one end. Residual black plastic pieces were in the bottom of the box. The broken plastic was due to improper packaging or the lack there of, causing the part to not be protected during shipment and or storage. I fixed the broken plastic the best I could since I needed a new circulating pump for the dishwasher. I installed the pump and it worked perfectly.
I wish the circulating pump had come with the sound reducing foam like the old pump that was replaced. However I had neoprene insulation padding that I was able to use to reduce the noise of the circulating pump. All is well and the motor and pump are still working perfectly. Thanks again..
★★★★★
★★★★★
William F - November 20, 2018
Verified Purchase
Good service
Got it in good time, nice video made it easy to install
★★★★★
★★★★★
Troy F - October 15, 2018
Verified Purchase
Quick and easy repair!
Part arrived a few days quicker than stated and an easy install. I noticed the part had some updated seals over the original design, a welcome sight. The OEM used a low quality seal that failed relatively fast for a durable appliance.
★★★★★
★★★★★
Ron W - May 7, 2018
Verified Purchase
Easy repair and amazing video
Our Frigidaire dishwasher has been making an awful screech about 2/3’s way through its cycle for a few months. I didn’t want to pay for someone to come out and look at it as minus the part it’s still over $100 for a repair man to come to the house. I went to the partselct website and it showed me what the common issues were. I figured it had to be the pump. Quick delivery. The video was step by step with my current model and couldn’t have been easier. Much thanks for great service and customer support.
★★★★★
★★★★★
James M - March 8, 2018
Verified Purchase
Part works great
My dishwasher is back to running quietly. The part was easy to install once I got the dishwasher disconnected.
★★★★★
★★★★★
John S - February 28, 2018
Verified Purchase
circulation pump
Very easy to install. Dishwasher is very quiet now.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud squeal while washing
Watched your video. Shut off water. Pulled power plug. Disconnected water and drain tube. Machine is lagged to the floor, as the counter top is Cambria, so have to remove two lag bolts. Slid out machine and turned on its side. Disconnected 2 wire harnesses. Removed 2 Torx screws, pulled pump, cleaned the unit and installed new pump. Rever
... Read moresed steps, and hooked all back up. Instructions on video were exactly accurate. Machine is now quiet, and dishes are getting cleaner. Thank you!
Read less
Kevin from BOZEMAN, MT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making a loud roaring noise (almost) the entire wash cycle
I followed the instructions on the Parts Select website. Everything worked just as described. However, I ran into a small snag when I tried to remove my dishwasher. The two tabs that you secure on the underside of you counter were getting caught on the underside of my countertop. After I realized that was the issue, I slightly bent them a
... Read morend I was able to slide the dishwasher out. Another helpful hint is to outline the spot where the tabs are (on the underside of your counter) with a pencil or pen, that way you will know exactly where to reinstall the dishwasher.
Read less
Stevie from CARSON, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making a loud whining or screeching sound on wash cycle
The short PartSelect instructional video perfectly showed how to replace the circulation pump and motor. The replacement took about 2 hours. Simply flipped circuit breaker off, disconnected the water and drain hoses under the sink and pulled the dishwasher out. The electrical wire was long enough to accommodate doing this without having t
... Read moreo disconnect the wiring in dishwasher. And turned the dishwasher over on its back. The removal and re-installation of the pump-motor assembly was the easiest and quickest part. It came out and the replacement from PartSelect went in exactly as shown in the video. Dishwasher was put back in place and reconnected. Ran perfectly and quietly.
Read less
George from FARRAGUT, TN
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
Only thing I did Different from the Install video was I put a towel down and laid the dishwasher on its side with wire connectors up, this made it easier to press the pump into the housing, also I used vaseline on the O Rings . 10 min job .
Todd from PERRYSBURG, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water at the end of cycle
Remove dishwasher from cabinet flip on it's back. Remove two wire connectors, two torx screws pull pump out and replace very simple. Parts select were great and very fast to ship parts
Joe from Prospect, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
28 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced dishwasher motor
Single-handedly. Tipped dishwasher on its side for easy access to water and electric connections. Went back together with no problems or leaks, washes quiter than ever.
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
48 of 68 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Corey
May 21, 2019
Good day! I have already pulled the pump out and your video nails the process and your pricing is very competitive (especially for those of us in Canada). I was wondering however if you are able to confirm that this is the part I need to replace. Our dishwasher was leaking and upon inspection, the water was coming from the pump area and must have had a slow leak for some time as the spring clamp has some rust on it. Once I removed the dishwasher and was able to look a bit better, the water seems to be coming out of a hole found up in what looks like vents (5 rectangular openings in the pump body right outside of the inserted portion.) I can dump a container of water into the dishwasher and it comes out of this hole without the dishwasher even running (or plugged in.) I don't want to replace an expensive part such as this if it's not the issue. Appreciate any thoughts. Thanks in advance.
For model number 58715313000A
Hello Corey, Thank you for the question. With the information provided it does sound like the pump is damaged and will need to be replaced. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gordon
June 6, 2019
After the drain pump completes and the circulation pump tries to start, the panel shows pf and the pump won't start. Is there an internal overload switch on the pump motor? Should we check for a pump blockage or other possible cause?
For model number GLD2445
Hello Gordon, thank you for inquiring. The PF code stands for power failure and will appear when the power has been interrupted to the unit. To clear this, press the START/CANCEL button. If this does not clear the code and resolve the issue, then you will need to replace the Electronic Control Board part PS234516 for your model. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
December 11, 2018
Water is not flowing. Dishwasher makes a growling sound. I suspect it is the pump assembly.
For model number FGHD2433KF1
Hi Greg, thank you for your question. It does sound like it could be. I would suggest first checking your spray arms and filters for any clogs that might be obstructing the water at all. If you find that there is nothing clogging the tubing and wash parts, then I would suggest taking a look at your pump being the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
December 10, 2019
The dishwasher is making a growling sound during certain cycles, how do I tell if it’s the drain pump of the circulation pump?
For model number PLD4375RFC3
Hello Scott, Thank you for the question. If the sound is at the end of the cycle it is more then likely the drain pump. If the noise is during the wash cycle, you may need the circulation pump. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brent
March 26, 2020
I have run the water/service test and received error code hs (hall sensor), is this related to the pump or the drain?
For model number FGHD2433KF0
Hello Brent, thank you for your question. The halls sensor is part of the motor which is PartSelect Number: PS3501022. I hope this helps.
Was this helpful?
Thank you for voting!
Joe
October 30, 2019
How difficult is it to replace this part and how long should it take me.
For model number ps3501022
Hello Joe, Thank you for the question. Here is a link to the How to Video. Level of difficulty and time would depend on your diy experience. Hope the video helps!
https://www.youtube.com/watch?v=_rWJ63Z7Ibg
