The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Lid or door won’t close | Will not drain | Will not agitate
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steven J T - December 13, 2022
Verified Purchase
Part was as described and worked
Part worked great. However paying the extra cost for 2 day shipping was a joke.
Part was to be delivered in 2 days.
It was shipped by FED EX.
The part never arrived here until 9 days from order date.
Totally not worth the extra money paid for shipping.
This company should use a different shipping provider.
★★★★★
★★★★★
David C - November 12, 2022
Verified Purchase
Ez repair
The part came in a timely manner and was top quality.
★★★★★
★★★★★
Rachelle R - November 4, 2022
Verified Purchase
Just the right part
When Googling a possible reason for our washer not spinning we came across a video that seemed to be exactly the issue we were having (lid latch assembly). I then Googled for the part and your site came up, I'm glad we selected it. The part came when it was promised and was a fairly easy fix, we did discover that we needed to re-set the machine; another words, we had to tip the machine to get to the bottom and disconnect the plug to the motor and then plug it back in again, this actually reset the whole machine and it's working better than ever.
★★★★★
★★★★★
Scott E - November 2, 2022
Verified Purchase
right part for the job
Repair was easy, the only challenging part was unclipping the broken part from the machine. Fixed the issue and it works now.
★★★★★
★★★★★
Clark C - September 6, 2021
Verified Purchase
It works!
Got it quickly, and it was just what I needed. As my late barber used to say, "Beautimous!"
★★★★★
★★★★★
PHILANDER M - August 27, 2021
Verified Purchase
Delivery Mystery
Order part on Tuesday. Delivery took 8 days to arrive at my house by Fedex ground from Georgia. 8 days Really!!. Not prompt at all.
★★★★★
★★★★★
Dawn M - July 30, 2021
Verified Purchase
Lid latch for washer
We received the part in 8 days. My husband put it on immediately and it worked GREAT! Thank you so much.
★★★★★
★★★★★
Marco M - March 17, 2021
Verified Purchase
Piece of cake.
The part was exactly what I needed. It arrived promptly. Installation was very easy. I saved myself over $300.
★★★★★
★★★★★
JOHN A - December 3, 2020
Verified Purchase
easy to replace lid latch
worked as expected
★★★★★
★★★★★
Aaron J - November 19, 2020
Verified Purchase
Easy repair
The part came fast and works like a charm.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 14 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lid wouldn't lock
Removed 5 screws on back, released 2 retention clips on front, lifted top of washer to expose lock assembly, removed 2 screws holding lock assembly in place followed electrical line back to plug behind control panel plugged new lock in, and reassembled in reverse order. Done!
James from INDIAN LAKE, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid lock/latch stuck closed
Watched a video
David from BELMONT, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not adgitate
I ordered a lid switch because the washer wouldn't agitate. Most reviews indicated that was the problem. While waiting for the part to arrive, I discovered the transmission to be of fault.I let parts select know that I no longer needed the part. Parts Select gave me an immediate refund no questions asked and before I returned the part to them. That is customer service!! I will use Parts Select for all my future purchases. I can trust a company that trusts its customers. Joe M. San Jose
Joe from SAN JOSE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would go into the cycle to rinse dry.
Replacing the part was fairly easy. However it did not resolve the problem. The spin cycle did not activate,leaving my washer full of water. We ordered another Maytag Washer. Hopefully this one doesn't break down for a long time.
Daniel from WARMINSTER, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid lock not working.
Followed instructions.
James from LIVONIA, LA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't agitate
Removed lid panel changed lid lock switch. Took cap off removed 7/16 bolt changed out thrust spacer and agitater repair kit. Took about an hour.
My washer lid lock light kept blinking and the washer would not start
I followed the online video, removed the old part and replaced it with the new part. My washer is working perfectly. It took about an hour to reset.
Janice from GREENVILLE, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
12 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't start - Flashing Lid Light
I checked out the reviews and the recommendation of these "professionals", replaced the part easy enough when it came in. However, it didn't solve the problem. Got an actual professional to come in and see what the problem was, and they determined that gear oil was being leaked and it wasn't worth replacing.
Tried to get a refund and return the part. Was told absolutely not. The money back guarantee is a lie.
Marc from HOPE MILLS, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
12 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wasn't spinning on final spin
First I found and reviewed videos on line to do the repair for my machine and when I actually did it the videos made it simple to do. Always look for videos of the installation for your machine or appliance and the job will go easy
Terry from HANCOCK, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid safety switch defective . Lid would not lock allowing washer operation.
Remove small screws on back of top on both sides, slide top forward. No need to remove water hoses. Lift top up to expose switch safety mechanism (black plastic) on front underside of top. Undo screws holding switch mechanism. remove plate cover from back of top and unplug wiring harness. Thread new wireing harness and plug through hole in top and plug in to plug receptor.
Garry from CANON CITY, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
17 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
101 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathy
October 1, 2017
My lid lock is not working causing the washer not to work. What could be causing this problem?
For model number MVWC425BW1
Hi Cathy, Thank you for the question. Sounds like the lid latch is defective and need to be replaced. Hope this helps!
45 people found this helpful.
Was this helpful?
Thank you for voting!
Amara
November 5, 2017
How do you replace the lid latch part?
For model number WTW5000DW0
Hi Amara, Thank you for the question. Here is a link to our video on how to replace the lid lock. It should be of some help.Good luck with the repair!
https://www.youtube.com/watch?v=u1DCXvPkWzM
40 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
August 25, 2017
How do I bypass damaged lid lock switch for a temporary test?
For model number 100.20022012
Hi Ronald,
Thank you for your question. First and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps. Good luck with your repair.
20 people found this helpful.
Was this helpful?
Thank you for voting!
RHONDA MURPHY
March 27, 2018
I installed a new lid lock and the washer won't start,won't let water in and the lid lock button stays red all the time.What can i do?
For model number WTW5640XW0
Hi Rhonda,
Thank you for your question. You may have a faulty lid switch. I would check it with a multimeter to see if it is working correctly. Also, try unplugging the washer for 10 minutes and this may reset the washer and clear the flashing light. If this does not work, press and hold the cycle signla button for 20 seconds and this should reset the washer and clear the flashing light. I hope this helps. Thank you and have a great day!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Kristy
January 19, 2018
When I push the start button on my washer the sensing light comes on, then the lid lock lights up. The lid lock light is blinking and making a clicking noise and not latching. The washer will not start. Can you help?
Hello Kristy,
Thanks for your question. This may be due to a defective lid lock/latch assembly. You could try testing the part with a multimeter to see if it has electrical continuity, and if it does not show continuity, replace it.
I hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Sandy
November 15, 2017
My Kenmore top loading washing machine doesn't always latch so that i have difficulty getting it to start and show the red lid locked indicator. There are two plastic prongs on the lid that go into a receptacle on the washing machine body.....don't know whether they are just worn or what....please advise.....thanks, Sandy
For model number 11020022011
Hi Sandy, Thank you for the question.If the lid strike is still there and there is no damage, I suggest replacing the Lid Latch Assembly PartSelect Number PS3497627. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia Harris
December 4, 2017
How do i get to the lid switch?
For model number MVWX700XL2
Hello Patricia, Thank you for your inquiry. I have included a link to a video on repairing the lid switch
https://www.youtube.com/watch?v=u1DCXvPkWzM Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Melanie
January 20, 2018
My washer will fill, agitate and drain but will not spin. The lid lock light flashes when it tries to advance to spin. Initially it would spin occasionally while in a wash cycle but now not at all. During test mode it would spin without a problem, however it has stopped during test mode as well. The lid will lock during the lid lock test. I replaced the shift actuator but it did not resolve the problem. I am getting error codes f7e1 and f7e7. Can you help?
For model number WTW4800BQ1
Hello Melanie,
Thanks for your question. The lid latch assembly is the most common reason why this issue would occur, and explains that error code. You may want to test the part with a multimeter and replace it if it shows no continuity.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Fay
January 23, 2018
Will this part fix the following problem: I push the start button, it sounds like the lid latches, the fill light comes on and then there is a pause. The latch then unlatches but fill light stays on?
For model number WTW4800XQ1
Hello Fay,
Thanks for your question. We would advise testing the machine in diagnostic mode to see if any error codes may help, but there are a few common parts we can recommend in this situation. The lid latch assembly should be tested with a multimeter to see if it has continuity. Replace it if it does not show continuity. You may also want to examine the shift actuator and agitator cogs to see if anything is damaged to prevent the machine from spinning. Look at the drive belt for any signs of damage as well.
I hope this helps.
My washer does not advance its cycles i have to manually move the knob to the next cycle. Example washer fills then seems like it is going through the cycles but does not go through so i move knob to rinse and spin the move knob to final spin. Now it is not agitating at all so it fills drains and spins but t=does not agitate. How de we diagnose what it is that is wrong?
For model number RTW4640YQ1
Hello Debbie, thank you for your question. I would recommend checking the lid switch first. Remove power from the appliance and check the switch for continuity with a multi-meter. If the lid switch has continuity then you will need to look at the rest of the motor circuit including the electronic control board part number W10484681. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3497627
Manufacturer Part Number: W10404050
