Ask our experts a question about this part and we'll get back to you as soon as possible!
30 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melissa
December 10, 2017
How many springs should be in the washer. I just took the top off and there are zero springs. I know there should be two on the right side, but should i get a second pack for the left side as well since there are 4 stabilizing rods?
For model number W10400895
Hi Melissa,
Thank you for your question. Your washer only uses 2 tub centering springs to secure it. I hope this helps. Thank you and have a great day!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
March 29, 2018
I asked a question the other day and i did get an answer but i think there was some misunderstanding. I ordered part #w10400895. These are the tub centering springs. They are two small springs and each one gets attached from the top of the tub and then gets attached to the suspension rods. They are located on the right side of the machine. On the left side of the machine there are two more places for two more springs, but there are no springs here. Are there typically only two tub centering springs or are there supposed to be four? I did order four springs and if i do attach all four will this help or cause a problem? Thank you for your time.
For model number ATW4675YQ0
Hi Peter, Thank you for the question. There are two centering springs, The centering springs will go one to the right front corner and one to the left rear. Hope this helps!
30 people found this helpful.
Was this helpful?
Thank you for voting!
Kenny
September 15, 2017
How many springs are on this washer. Part # w10348658. Thanks
For model number 110.20022012
Hi Kenny,
Thank you for the question. This appliance has two Tub Centering Springs and they come as a set of two with part number PS3497596.
Hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Theresa
December 14, 2017
Is there a video on how to replace springs
Hello Theresa, Thank you for the question. We do not currently have a video for these springs. We do have one for the bottom suspension springs. In the video it will show how to open up the cabinet, Once the cabinet is open you can see where the springs are installed onto the sides of the tub. When you expose the top of the tub you will see the spots where the springs connect to the tub and then to the rods. Hope this helps!
https://www.youtube.com/watch?v=ZjtNS0a0oEI&t=4s
10 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
August 1, 2017
How many tub centering springs does my washer have?
For model number wtw4800xq2
Hi Mike,
This appliance has two Tub Centering Springs and they come as a set of two with part number PS3497596.
Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
August 2, 2018
Where are the tub centering springs located on the washer
For model number MVWC200XW2
Hello Paula, Thank you for the question. The tub centering springs are at the top of the outer tub. There is a spot to connect the spring to the tub and then they hook onto the rods. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Samantha
February 20, 2019
Cannot wash any clothes without washer clanging and banging like crazy. I have 2 of these springs with both of them located on the rear right & front right of the machine. Why aren’t they on either side of the tub???
For model number NTW4501XQ0
Hello Samantha, thank you for writing. There are only two springs on the unit. We would recommend checking the suspension springs, drive block, and tub bearing. You may also want to check the Thrust Spacer and drive pulley. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Rita
January 9, 2018
Where are the tub balancing springs located in this model
For model number RTW4640YQ0
Hello Rita, Thank you for your inquiry. These are located on either side of the top of the outer tub. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Damon
September 29, 2017
What corners if i am facing the front of the washer do the springs go on if there are only two?
For model number 110.20022012
Hi Damon, Thank you for the question. The springs are installed onto the sides of the tub. When you expose the top of the tub you will see the spots where the springs connect to the tub and then to the rods. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
February 15, 2019
My washer shakes sometimes when spinning not all the time. I looked at your online print and saw it had a suspension kit and centering springs. The suspension rods and springs seem fine but there are no springs. Is this normal for this model or should i install two centering springs ?
For model number WTW4910XQ1
Hello Gary, Thank you for the question. The springs may have broke off. They are required and we recommend having them replaced. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Whirlpool Washer Tub Centering Spring - 2 Pack
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
WASHER ON SPIN CYCLE WOULD SHAKE, MAKE NOISE AND WALK ACROSS FLOOR
FOLLOWED VIDEO INSTRUCTIONS, UNPLUGGED AND REMOVED WATER LINES AND DRAIN, REMOVED HARNESS COVER PLATE. MOUNT SCREWS AND TOP, UNHOOKED SUSPENSION RODS(FOUND THEY HAD LEFT OUT TOP SPRINGS FROM TUB TO SUSPENSION RODS WHEN MANUFACTURED) PUT TOP BACK ON WITH ONE SCREW, PUT ON SIDE, REMOVED AND REPLACED SUSPENSION RODS, HOOKED THEM TO SIDE CABINET, SAT UNIT BACK UP, INSTALLED NEW PLASTIC CUPS AND TOP SPRINGS(HAVE TO ORDER SEPERATE) INSTALLED RODS IN LOCKING CAPS, PUT TOP BACK ON, PUT HARNESS COVER PLATE AND MOUNTING SCREWS IN, HOOKED UP TO WATER, AND DRAIN, LEVELED UNIT, PLUGGED IN AND WASHED CLOTHES, NO PROBLEMS, WORKS GREAT.
Raise top cover, remove tub ring. Remove suspension rods one at a time by pulling the rods upward, remove keepers at top,pulled rods out the bottom by tilting washer. Replaced all four rods and installed load centering springs which hadn't been installed from factory. Took 1/2 hour and works like a new one??
I do not know much about washer repair and after watching how to replace the suspension rods I decided it was not as difficult as I thought. I replaced the suspension rods and springs and that fixed the problem. The price for parts was reasonable and I received my parts in 2 days.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael M - April 28, 2023
Verified Purchase
A great repair experience.
Perfect part exactly the part I need . Came up first on the no hassle Parts Select search engine. The Parts Select instructions how to video showed me how to install the parts I purchased from Parts Select . Parts Select had the best price, fast shipping. Will buy from parts Select again.
★★★★★
★★★★★
Marilyn D - April 5, 2023
Verified Purchase
Little but mighty
When we got this part, it seemed hard to believe that it would work because it looked so small and, to tell the truth, flimsy. However, it’s totally fixed the problem we had with the tub—even after testing it with big loads which used to stop the machine.
★★★★★
★★★★★
Tiffany J K - October 12, 2022
Verified Purchase
one packet comes with 2 springs
It was not clear on the website how many springs came with a purchase so I ordered twice a as many. It was quite an expensive purchase.
Other than that I was satisfied with the product and the parts shipped fast. It didn’t fix our washer issue though since in the end we needed new extension rods.
★★★★★
★★★★★
Vincent R - August 9, 2019
Verified Purchase
Centerring Spring
I haven't installed them yet but on bulky fitted sheets some times the washer would not spin. I found one of the springs was missing. Also it is possible to install them by lifting the ring to expose the pin. But first it is possible to wind the spring onto the vertical sprint support without removing it.
★★★★★
★★★★★
Chris R - June 4, 2019
Verified Purchase
Got what I ordered
Got exactly what I ordered in a timely fashion, worked great
★★★★★
★★★★★
James S - March 5, 2019
Verified Purchase
repaire
worked just fine
★★★★★
★★★★★
Gilles S - December 18, 2018
Verified Purchase
Tub shake.
Easy repair.Problem resolved.Tub does not shake anymore.Make sure the washer machine is well level on the floor.
★★★★★
★★★★★
Carl C - June 24, 2018
Verified Purchase
Great parts easy repair
My parts was in great condition when it arrive. It came very quickly and the repair went very well thanks to the video provided and now my machine is working very well again
★★★★★
★★★★★
Judy K - June 5, 2018
Verified Purchase
Easy repair but didn't work
The part was exactly what we needed/wanted. We paid for 2-3 days shipping and got it in 4, but not due to Parts Select being slow. They sent it out right away. We knew the problem for wobbly drum could be the as easy as the springs or, if not, not worth the price of repair. It was worth a shot since we could replace the springs ourselves. It didn't work though. Had to get a new washer.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
