Whirlpool/Whirlpool_Thumb/WUYKB8JV.gif
See part 32 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

SPRING

★★★★★
★★★★★
7 Reviews
$ 5.51   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3497596
Manufacturer Part Number W10400895
Manufactured by Whirlpool
Product Description

SPRING Specifications

Tub centering spring - Included 2 springs

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Shakes and moves | Noisy
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# W10400895 replaces these:
AP5263280, W10348658, W10400895VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

28 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melissa
December 10, 2017
How many springs should be in the washer. I just took the top off and there are zero springs. I know there should be two on the right side, but should i get a second pack for the left side as well since there are 4 stabilizing rods?
For model number W10400895
Hi Melissa, Thank you for your question. Your washer only uses 2 tub centering springs to secure it. I hope this helps. Thank you and have a great day!

24 people found this helpful.

Was this helpful?
Thank you for voting!
Peter
March 29, 2018
I asked a question the other day and i did get an answer but i think there was some misunderstanding. I ordered part #w10400895. These are the tub centering springs. They are two small springs and each one gets attached from the top of the tub and then gets attached to the suspension rods. They are located on the right side of the machine. On the left side of the machine there are two more places for two more springs, but there are no springs here. Are there typically only two tub centering springs or are there supposed to be four? I did order four springs and if i do attach all four will this help or cause a problem? Thank you for your time.
For model number ATW4675YQ0
Hi Peter, Thank you for the question. There are two centering springs, The centering springs will go one to the right front corner and one to the left rear. Hope this helps!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Kenny
September 15, 2017
How many springs are on this washer. Part # w10348658. Thanks
For model number 110.20022012
Hi Kenny, Thank you for the question. This appliance has two Tub Centering Springs and they come as a set of two with part number PS3497596. Hope this helps!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Theresa
December 14, 2017
Is there a video on how to replace springs
Hello Theresa, Thank you for the question. We do not currently have a video for these springs. We do have one for the bottom suspension springs. In the video it will show how to open up the cabinet, Once the cabinet is open you can see where the springs are installed onto the sides of the tub. When you expose the top of the tub you will see the spots where the springs connect to the tub and then to the rods. Hope this helps! https://www.youtube.com/watch?v=ZjtNS0a0oEI&t=4s

7 people found this helpful.

Was this helpful?
Thank you for voting!
Rita
January 9, 2018
Where are the tub balancing springs located in this model
For model number RTW4640YQ0
Hello Rita, Thank you for your inquiry. These are located on either side of the top of the outer tub. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Paula
August 2, 2018
Where are the tub centering springs located on the washer
For model number MVWC200XW2
Hello Paula, Thank you for the question. The tub centering springs are at the top of the outer tub. There is a spot to connect the spring to the tub and then they hook onto the rods. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
August 1, 2017
How many tub centering springs does my washer have?
For model number wtw4800xq2
Hi Mike, This appliance has two Tub Centering Springs and they come as a set of two with part number PS3497596. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
February 15, 2019
My washer shakes sometimes when spinning not all the time. I looked at your online print and saw it had a suspension kit and centering springs. The suspension rods and springs seem fine but there are no springs. Is this normal for this model or should i install two centering springs ?
For model number WTW4910XQ1
Hello Gary, Thank you for the question. The springs may have broke off. They are required and we recommend having them replaced. Hope this helps, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Samantha
February 20, 2019
Cannot wash any clothes without washer clanging and banging like crazy. I have 2 of these springs with both of them located on the rear right & front right of the machine. Why aren’t they on either side of the tub???
For model number NTW4501XQ0
Hello Samantha, thank you for writing. There are only two springs on the unit. We would recommend checking the suspension springs, drive block, and tub bearing. You may also want to check the Thrust Spacer and drive pulley. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Angel
June 17, 2019
How many coil the machine have. I found two coil of this part w10400895 , because the start to make high and unusually noise, catastrofic noise. Was a heavy load
For model number WTW4950XW2
Hi Angel, thank you for your question. For the part above, you would generally need 4. However you might also what to take a look at your suspension springs as well. I have listed that kit below. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 3 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    WASHER ON SPIN CYCLE WOULD SHAKE, MAKE NOISE AND WALK ACROSS FLOOR
    FOLLOWED VIDEO INSTRUCTIONS, UNPLUGGED AND REMOVED WATER LINES AND DRAIN, REMOVED HARNESS COVER PLATE. MOUNT SCREWS AND TOP, UNHOOKED SUSPENSION RODS(FOUND THEY HAD LEFT OUT TOP SPRINGS FROM TUB TO SUSPENSION RODS WHEN MANUFACTURED) PUT TOP BACK ON WITH ONE SCREW, PUT ON SIDE, REMOVED AND REPLACED SUSPENSION RODS, HOOKED THEM TO SIDE CABINET, SAT UNIT BACK UP, INSTALLED NEW PLASTIC CUPS AND TOP SPRINGS(HAVE TO ORDER SEPERATE) INSTALLED RODS IN LOCKING CAPS, PUT TOP BACK ON, PUT HARNESS COVER PLATE AND MOUNTING SCREWS IN, HOOKED UP TO WATER, AND DRAIN, LEVELED UNIT, PLUGGED IN AND WASHED CLOTHES, NO PROBLEMS, WORKS GREAT.
    • Timothy from E PALESTINE, OH
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Socket set
    • Parts Used:
      W10780048, W10400895
    11 of 11 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Banging all the time during rinse as if its out of balance
    Followed the video, no need to add. Worked perfectly!
    • christine from SWANSEA, MA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    • Parts Used:
      W10780048, W10400895
    8 of 12 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Washer shook violently during spin cycle
    Raise top cover, remove tub ring.
    Remove suspension rods one at a time by pulling the
    rods upward, remove keepers at top,pulled rods out the bottom by tilting washer. Replaced all four rods and installed load centering springs which hadn't been installed from factory. Took 1/2 hour and works like a new one??
    • Bobby from LAGRANGE, OH
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers
    • Parts Used:
      W10780048, W10400895
    4 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      7 Reviews
      4.6
      Filter By Rating:
      • 5 Stars
        4
      • 4 Stars
        3
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS3497596
          Manufacturer Part Number: W10400895
          Brand
          Model Number
          Description
          Kenmore
          11020022012
          Washer
          Kenmore
          11021102012
          Washer
          Kenmore
          11021102013
          Washer - AUTOMATIC WASHER
          Kenmore
          11021182012
          Washer
          Kenmore
          11021252111
          Washer
          Kenmore
          11021292012
          Washer
          Kenmore
          11021302012
          Washer - WASHER
          Kenmore
          11021302013
          Washer - AUTOMATIC WASHER
          Kenmore
          11021352111
          Washer
          Kenmore
          11021352112
          Washer - AUTOMATIC WASHER
          Kenmore
          11021392012
          Washer - Kenmore Washing Machine
          Kenmore
          11026002011
          Washer
          Kenmore
          11026012011
          Washer
          Kenmore
          11026012012
          Washer - AUTOMATIC WASHER
          Kenmore
          11028002011
          Washer
          Kenmore
          11028002012
          Washer - AUTOMATIC WASHER
          Kenmore
          11028012011
          Washer
          Maytag
          7MMVWC210YW0
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWC300YW1
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWC310YW0
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWC400YW1
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWC400YW2
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX500YW1
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX500YW2
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX510YW0
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX510YW1
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX700XL1
          Washer - AUTOMATIC WASHER
          Maytag
          7MMVWX700XL2
          Washer - AUTOMATIC WASHER
          Whirlpool
          7MWTW1501AW0
          Washer
          Whirlpool
          7MWTW1502AW0
          Washer

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service