Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Thermostat quit.
Checked all sensors with a multi-meter, found the thermostat to be the problem, no continuity.
Tony from ITHACA, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 26, 2018
I just replaced part wb21x10148 thermal fuse because the microwave would not heat but it would run. Now with fuse replaced the vent fan runs on high when the unit is plugged in stating it senses high heat and will turn off automatically. Will replacing the thermostat resolve this issue?
For model number CSA1201RSS02
Hello John, Thank you for the question. I suggest testing the door switches. You can test the switches with a multi meter to check for continuity. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Joseph
April 15, 2022
One of the thermostats was toasted where the plastic around the terminal connector melted. Main Fuse is good still have lights and clock. Installed new N\C thermal fuse and Installed new control board but still no heat nor is the table turning.
For model number cvm1790ss2ss
Hello Joseph, thank you for writing. The issue may be the Diode Cable PS239148. The main heat source is generated by the PS12725839. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
One of the connections of the one thermostat PS3491479/WB20X10048 that is outside the magnetron has melted plastic/black heat damage to the plastic connector part of the wire. I'm definitely buying a replacement thermostat, what I'm wondering is if there is a corresponding plastic clip that can be crimped to the white wire that's damaged if I cut off the end part and recrimp it? (Trying to avoid buying a whole new wiring harness or taking apart the whole unit.)
For model number PT7800SH4SS
Hi Robert, thank you for contacting us. Unfortunately, the plastic clip is not sold separately, and you may need to purchase the complete wire harness, part number PS12722495, along with the thermostat, part number PS3491479. If you need help placing an order, customer service is open 7 days a week!
