Part Location Diagram of 341241 Whirlpool Multi Rib Belt - 92-1/4"
See part 26 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Multi Rib Belt - 92-1/4" 341241

 Fits your 4KAED4900FW0!
★★★★★
★★★★★
381 Reviews

Rated by 359 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 17.17
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 4KAED4900FW0!
PartSelect Number PS346995
Manufacturer Part Number 341241
Manufactured by Whirlpool for Kenmore, Whirlpool, KitchenAid, Norge
Product Description

Multi Rib Belt - 92-1/4" Specifications

This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the rotation of the motor to turn the drum. The belt attaches to the drum, idler pulley, and motor pulley.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning | Heat stays on after drum has stopped | Too hot
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# 341241 replaces these:
AP2946843, 529597, 341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241, 341241VP, 345473, 349533, 53-0186, 53-1080, 53-1086 , 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 99906951, 99989673, 99989674, AP32, FSP341241, P46-037, P46-149, W10127457, W10131364 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
381 Reviews
4.9
Filter By Rating:
  • 5 Stars
    345
  • 4 Stars
    26
  • 3 Stars
    5
  • 2 Stars
    2
  • 1 Star
    3
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 359 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Drum would get hung up, belt would slip sometimes and there was a squeaking sound
Pull the front off. The belt was removed from idler pulley which was missing the wheel and pulled drum forward . Removed drum, replaced rear drum support roller kit and idler pulley assembly, put belt on and slid drum back in. Installed front panel, plugged in, works like a new dryer. It was very simple.
Other Parts Used:
Idler Pulley Assembly Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4" Lint Filter with Handle
  • Michael from N CHESTERFLD, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum not turning; accompanied by loud "screeching" sound.
Followed instructional video provided for this type of repair after diagnosing problem via of 'troubleshooting' on PartsSelect site. Simple, safe, and relatively easy (minimal mechanical knowledge helpful).
Second time using PartSelect; washing machine repair ~ 6 mo. previous.
PartSelect was spot-on with that repair as well, saving hundreds of dollars.....my go-to site for appliance repairs and pats....make it yours as well and you will NOT be disappointed! Fast, prompt shipping.
Other Parts Used:
Lint Filter Motor Pulley - 60 Hz. Multi Rib Belt - 92-1/4"
  • holly from LONG BCH TWP, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench (Adjustable)
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer belt broke. During the effort to replace the belt it was noted that the lint trap housing seals were in need of replacement.
With the dryer taken apart to replace the broken belt it was obvious that the lint seals had not been working properly due to the excessive amount of lint covering all of the inside surfaces of the dryer. The belt idler pully had also moved from its normal mounting position and was laying at the bottom of the dryer. Because the lint had covered the bottom before the belt broke it was obvious to determine where the idler pully attached to the bottom.

Before cleaning I marked the exact location where the idler pully mounted to the bottom of the dryer.

While waiting for the replacement parts to be delivered a vacuum cleaner was used to remove lint from the inside surfaces of the dryer as well as the old fragments of the lint trap housing seals were removed and surfaces where the new seals would attach were cleaned.

Assembling the dryer with the new belt was a challenge due to the lack of support for the drum while getting the new belt in place, lined up properly, threaded through the idler pully and attached to the motor drive shaft. This is how I installed the new belt:

I used a piece of wood wider than the sides of the dryer, drilled holes that allowed for a piece of cloths line rope to be looped through and used to support the door opening end of the drum.

The drum was set on the seal and rollers at the back of the dryer.

The temporary wood /rope hanger was placed at the front end of the dryer resting on the sides with the top of the dryer raised.

The rope was adjusted until the drum rested on the back rollers and the rope like it would be positioned normally.

The new belt was then gently installed under the temporary support rope and around the drum.

The new belt had many kinks from shipping and was difficult to align with the location on the drum where it needs to ride so small strips of tape were temporarily used to hold the new belt in position until it could be fed through the idler pully and on to the drive shaft.

Several small pieces of a cardboard box were used to shim under the idler pully to hold it in its proper location as well as to make the belt attachment to the drive shaft easier.

With the belt attached, the temporary cardboard shims were removed from under the idler pully.

The front of the dryer was attached .

The temporary board and rope hanger was removed.

The tape that had been placed over the new belt to hold it in proper alignment was removed as the drum was rotated slowly by hand to ensure that all tape was removed prior to closing the top of the dryer.

The seals as well as the remainder of the dryer assembly was completed without any problems.

The dryer ran well for its initial trial spin and has dried several loads of laundry since.

Great parts and support Thankyou
Other Parts Used:
SEAL Lint Trap Housing Seal Multi Rib Belt - 92-1/4"
  • Benjamin from WELLS, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
19 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rear Drum Seal started to come apart
Used the YouTube video sent by this site
Other Parts Used:
Multi Rib Belt - 92-1/4" Rear Drum Seal with Adhesive
  • Brett from CRESCENT CITY, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stopped spinning
The dryer quit working. I did some trouble shooting on your amazing site, ordered what i thought it might need and then got to work. Took no time to get it apart and replace roller kit and belt. What took the longest was getting in there and cleaning out probably 15 years worth of dirt and dust. If you have not opened your dryer up and done this, 10/10 recommend, because in doing so i found that the motor was the real culprit. Once i opened it up more, especially cleaning around the blower fan and motor, i was half a day in. Put it all back together and got it running for two more loads before the motor quit. Replaced that and since the hard work was done, had it back in in half an hour and running great. Probably will need to redo the felt seal one day, but for now, i am calling it a win. This is my go to site for all things and i have been able to work on most of my major appliances and do it myself using the helpful information here.
Other Parts Used:
Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4"
  • Danielle from FREEDOM, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stopped spinning.
Followed the PartSelect instruction video.
Basically opened the dryer.
Took the drum out.
Took the broken motor out.
cleanned the dryer since I had everything opened.
Replaced motor, pulley, old belt.
My 20 years old dryer is running like brand new.
Other Parts Used:
Idler Pulley Assembly Clamp-Motor Multi Rib Belt - 92-1/4" Drive Motor with Pulley
  • sherif from BARTONSVILLE, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to convert from LPG to Natural Gas
Two parts were needed in order to convert the dry back to Natural Gas. Part Select is usually good, but dropped the ball completely on this one. I received the correct Orifice, but was not asked or told about the need for the part for the regulator so the gas pressure would be changed back to Natural Gas. I found one at a local supplier and finished the switch. I chose to change the belt while in there because the dryer sounded like the belt had a chunk missing with the rhythmic thump. After installing the new, I found that one of the tumble paddles had a penny flopping inside it. One thump per revolution. This is the first in my career that the technician had not left the original orifice and regulator cap attached to the dryer.
Other Parts Used:
Natural Gas Orifice for Dryer Gas Valve Multi Rib Belt - 92-1/4"
  • Dexter from COUNCIL BLFS, IA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt broke
Unscrew the lintfilter opening, lift the upper plate, open the front panel and lower panel. Take the broken belt out and insert the new belt. Close everything and start the dryer. That’s it.
Other Parts Used:
Bearing Ring Multi Rib Belt - 92-1/4"
  • Matthias from BEVERLY HILLS, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy
Asking my question on you tube they show me problems and parts to need replace and how do installation.
Other Parts Used:
Roller Support Tri-Ring Rear Drum Felt Seal Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4"
  • DAT from ALHAMBRA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was screeching and squealing when running
I removed the top panel, then the front panel.
Removed the belt and the drum.
Saw what I needed to replace. Ordered the parts then put back together. It was a really easy job.
Other Parts Used:
Seal and Bearing Idler Pulley Assembly Rear Drum Felt Seal Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4"
  • Nathan from ALTOONA, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench (Adjustable)
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

58 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christine
July 20, 2017
When installing the belt how should the grooves be facing?
PartSelect logo
Hello Christine, great question! When installing the belt, you should have the groove side facing the drum. I hope this helps!

148 people found this helpful.

Was this helpful?
Thank you for voting!
Lawrence
July 20, 2017
My dryer is struggling to rotate during a drying cycle but the belt is new, where should I start?
PartSelect logo
Hi Lawrence, based on your symptoms it sounds like a bad motor that needs replacing. Please let us know if you have any further questions.

55 people found this helpful.

Was this helpful?
Thank you for voting!
Mona
July 20, 2017
Just replaced the belt not too long ago and they symptoms im experiencing include a loud squeaky sound and long drying times
PartSelect logo
Hello Mona, we recommend checking your exhaust duct in your home, as this is the most common cause for the long drying time. For the squeaking sound, you should check your drum rollers 349241T and your idler pulley WP691366. Best of luck with this repair!

45 people found this helpful.

Was this helpful?
Thank you for voting!
Bryan
August 29, 2017
Where can I find the belt for this model
For model number LER7620LG0
PartSelect logo
Hi Bryan, Thank you for the question. The belt attaches to the drum, idler pulley, and motor pulley. You will need to remove the top and front panel to expose the drum and see where the belt is located. Hope this helps!

24 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
December 8, 2017
What's the part number for belt and drum support wheel
For model number LG7681XSW2
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS346995 for the Belt and PartSelect Number: PS347627 for the drum support rollers. Hope this helps!

22 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Arrt
October 15, 2017
How do you decide what platform belt to purchase for my model?
For model number cde6500w
PartSelect logo
Hi Arrt, Thank you for your question. You would want to purchase the belt that is directly found underneath your model number. This would be the correct belt according to your model number. Good luck with your repair.

19 people found this helpful.

Was this helpful?
Thank you for voting!
Jamie
November 28, 2017
Do i need a belt for a 27" drum or 29"
For model number KGYS750JQ2
PartSelect logo
Hi Jamie, Thank you for your question. According to your model information this is the correct belt for your appliance. Good luck with your repair.

18 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
September 6, 2017
I can't find steve nash video for this fix
For model number RED4640YQ1
PartSelect logo
Hi Karen, Thank you for your inquiry. We do not have an installation video for this part as of yet. However there are quite a few detailed installation instructions from other customer's down below that may help you with your installation. Good luck with your repair.

18 people found this helpful.

Was this helpful?
Thank you for voting!
Ray
December 17, 2017
I replaced the parts using the install kit. I noticed that my previous belt was broken. My issue now is that the drum is still not turning and the dryer is burning something, as there is now a smoke smell. Any suggestions?
For model number 11072832100
PartSelect logo
Hello Ray, Thanks for your question. It may be worth replacing the drum glides or drum roller axles. If those parts are intact, it may be an issue with the motor itself. I hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Shay
November 7, 2018
I have a Crosley dryer, and I need to replace the dryer drum belt. Where do I find the model number?
PartSelect logo
Hello Shay, Thank you for the question. Here is a link to help locate the mopdel number sticker on the appliance. Hope this helps! https://www.partselect.com/Model-Number-Locator+5+repair.htm

4 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS346995
Manufacturer Part Number: 341241
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
11060172000
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060202990
Dryer
Kenmore
11060212990
Dryer
Kenmore
11060222510
Dryer - DRYER
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060232000
Dryer
Kenmore
11060232001
Dryer
Kenmore
11060232002
Dryer
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
1106062110
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
1106072010
Dryer - ELECTRIC DRYER
Kenmore
1106072011
Dryer - ELECTRIC DRYER
Kenmore
11060722990
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service