See part 13 in the diagram
( Grid squares measure 1x1 inch )
Evaporator Fan Motor Kit - 120V 60Hz
$
45.39
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS3419839
Manufacturer Part Number 5303918549
Manufactured by
Frigidaire
Product Description
Evaporator Fan Motor Kit - 120V 60Hz Specifications
The evaporator fan motor (Motor Evaporator Fan, Evaporator Fan Motor Kit, Evaporator Fan Motor, Refrigerator Evaporator Fan Motor) circulates air through the food compartment for efficient cooling in refrigerators. The evaporator fan motor can squeal as its bearing dries out. The motor bearings can totally seize, preventing any movement. The motor coil can also burn out, preventing any fan movement. If this motor fails, the refrigerator compartment will warm up and eventually the freezer will reduce cooling as well. Excessive frost can build up on the evaporator coil due to lack of air movement. The motor can make a squealing noise when it is beginning to fail or will not operate at all when powered, and this is a sign it should be replaced. The evaporator is located in the rear of the freezer compartment. This part measures 2-1/2 inches wide by 3 inches tall by 1 inch thick, at its widest point. It is constructed of plastic and metal, and comes in black/silver. This kit includes the evaporator fan motor and harness.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Fridge too warm | Noisy | Freezer section too warm | Fridge and Freezer are too warm
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 5303918549 replaces these:
AP4700070, 1637660, 5303918549, 240315801, 240315802, 240315803, 240369701, 240369702, 241537301, 5304445861
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
September 8, 2017
Evaporator fan keeps going on and off?
For model number frs23r4cw2
Hello Larry, thank you for contacting us. The evaporator fan should stop when the freezer is in defrost mode. If it is randomly going on and off when the fridge is cooling that may be from a bad fan motor, you may want to take a look at the evaporator fan motor as it may need to be replaced.
15 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ricardo
August 8, 2017
I took out refrigerator from kitchen in march put in garage, plugged it up this weekend does not get cold, freezer part not cold either, got new capacitor from you guys today and still not cooling, what other part could it be.
For model number FRS6R5ESB4
Hi Ricardo,
Thank you for your inquiry. There are a couple of parts that could cause that problem. The run capacitor is usually the first part to test to see if it is not working. The second most common part would be your defrost thermostat. Test that part with a multi-meter to see if it is still working. If it is still working, it might be your adaptive defrost control board that is the problem. This part would need to be tested by a trained technician. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
September 14, 2017
Would this cause only refrigerator section to warm??? error code sy ef condition evaporator fan circuit failure check/repair check wiring between evaporator fan and control board. check for 12vdc to fan between red and brown wires. check for variant voltage (depending on high or low speed) between yellow and brown. if correct replace evaporator fan. if error code still exist, replace control board.
For model number FGHG2344MF6
Hi Mary,
Thank you for your question. The error code SY EF means that your temperature sensor has shorted and needs to be replaced. This could definitely cause your fridge section to be warm. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jack
October 9, 2017
The fan motor pulsates off and on all the time, ref. Is only 55 degrees but the freezer works.
For model number frs26rlecso
Hi Jack,
Thank you for your inquiry. Based on what you described it sounds like the fan needs to be replaced. If it is making loud noises than that is a sign it is not working correctly. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Janet Smith
August 21, 2017
Our refrigerator runs all the time (loud) and now the refrigerator is too warm to keep food cold, and we are using the freezer to keep our food cold since it is too warm to freeze food or water, but it is doing the job to keep our refrigerator food cold.
For model number FRT18IL6DBN
Hi Janet,
Thank you for your inquiry. There are a couple of parts that may fix this issue. The 2 most common parts that will fix this issue are the defrost timer and the evaporator fan motor. Some other parts you may need to look at as well are the defrost thermostat, the temperature cold control thermostat, the fresh food door gasket, and the condenser fan motor. To verify which parts are causing the issue you will need use a multimeter to check the continuity of each part. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Angel
April 15, 2018
Can you send a video of installation of evaporator fan in a refrigerator? Model frs23r4cw2 ...2 doors
For model number FRS23R4CW2
Hi Angel, Thank you for the question. Here is a link for the video. Hope this helps!
https://www.youtube.com/watch?v=ngF89wL67ko
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kirk
April 30, 2018
The fridge is warm, the freezer is at 17. Can feel cool air coming into fridge section but feels like a breeze than blowing. Can seem to hear the fan running in the freezer. Btw there does not appear to be ice build up anywhere but haven't removed covers, been running for 6 weeks after sitting for maybe a year. What part do you think i need?
For model number FRS23R4AW8
Hi Kirk,
Thank you for your question. There are a few parts that you should take a look at. The first part to check would be your evaporator fan motor. You should also take a look at your defrost thermostat and heater as well. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Al
November 28, 2017
My evaporator fan cycles on and off. It tries to start for 2 seconds and shuts off for 2 seconds. When compressor kicks in,it runs on and off. Sometimes it runs on with the compressor and shuts off when the compressor shuts off, only to start write back up and then cycle on and off until the compressor starts up again. This cycling runs for the better part of the day. Very seldom is the fridge in a satisfied resting state. Temperatures in the freezer and fridge are working fine. Thank you. Al
For model number GLRS237ZDQ0
Hi Al, Thank you for the question. I suggest first checking the wiring from the fan motor. Make sure nothing has come lose or is damaged. With a Ohm meter you can test to see if the fan motor is getting the proper power. If not you may need to replace the Adaptive Defrost Control Board, PartSelect Number PS2582247. This board supplies the board with power. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
July 9, 2019
Freezer is working but fridge is at about 55 degrees. Happened before and went back to normal after a day or two. Is it the evaporator fan?
For model number 10658129700
Hello David, Thank you for the question.If the fan motor is not running it will need to be replaced. If the fan is running you can test the Bi-Metal Defrost Thermostat, PartSelect Number PS11750673. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Mike
May 6, 2018
I heard a crackling sound coming from the dampener and the refrigerator side is too warm. The freezer appears to be fine. I don't see any frost build up. There is a little bit of cold air coming from the freezer but i don't know how hard the condenser motor should be blowing. Is my issue with the dampener or the condenser motor or both?
For model number FRS26KF6EM5
Hi Mike. Thank you for the question. This sounds like an issue with the air damper. The motor could have shorted out and it is no longer opening to allow cold air through. I suggest having it replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Repair Tip: The motor has been updated by the manufacturer. For your safety, make sure food is safely stored so it does not deteriorate while the power is off, and unplug your fridge before beginnig this repair.
Replacing your Frigidaire Refrigerator Evaporator Fan Motor Kit - 120V 60Hz
How to Troubleshoot Temperature Problems in Your Refrigerator
Test If Your Electrical Part is Failing - Multimeter Tool
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 25 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bottom of fridg. would not get cool. Temp was 50-60degrees. The freezer compartment worked so I knew it was not the compressor.
I removed the fan housing in the freezer section by removing all the screws. (7) There are two screws behind the vents. I did not have an ice maker to contend with so this was very easy. There is only two wires to disconnect....the ground wire and the electricity supply. Then you remove the unit from the back of the housing cover by removing two screws. Then the motor is removed from it's housing by removing 2 more screws. 1...2...3 and you're ready to reverse the procedure. I am not mechanically inclined and this was easy. Saved myself perhaps $120.00. Repair folks wanted mininum of $60.00 just to come out. Part and shipping cost me 33 bucks.OH, DON'T FORGET TO UNPLUG THE FRIDGE. :>)
-
Larry from Carthage, NC -
Difficulty Level:Easy -
Total Repair Time:30 - 60 mins -
Tools:Nutdriver -
Parts Used:5303918549
147 of 168 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor on Evap Fan quite spinning
OK, what I really want to talk about is the really poor quality of the fan motor. This is the third time that it has failed (about once per year). Local maintenance shops do not stock the motor, hence the frozen food thaws before they can get a part. I always keep a spare motor so that I can immediately repair the fridge.
The repair is very easy - remove all racks in the freezer and then remove their slides. Then remove the screws in the back plate. Due to the ice maker, the plate will not come out, so just pull it up and tie it off. Remove the screws to remove the motor fan assembly. I did the repair with the power on, BUT BE CAREFUL if you do so. Uplug the power from the motor, and remove the assembly from the freezer. Disamble and replace the motor. Then revese the above and you're freezing again.
The repair is very easy - remove all racks in the freezer and then remove their slides. Then remove the screws in the back plate. Due to the ice maker, the plate will not come out, so just pull it up and tie it off. Remove the screws to remove the motor fan assembly. I did the repair with the power on, BUT BE CAREFUL if you do so. Uplug the power from the motor, and remove the assembly from the freezer. Disamble and replace the motor. Then revese the above and you're freezing again.
-
Gary from League City, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
-
Parts Used:5303918549
56 of 70 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom of frezzer cold...top warm...refrigerator warm
I first located the wiring diagram under right frt. of fridge. Using it I troubleshot the problem to be the ADC module. I ordered the ADC module and blower motor that it controls(as a precaution since that is the device that the ADC drives)After removing the icemaker and all the back panels in the freezer you can access the blower motor. The ADC module is accessible after removing the plastic panels in the top of the fridge. Look for a burn spot on the module. Be sure to order the parts using the fridge model # and not the parts # on the wiring diagram(they will have changed since the model was built). Mine needed an updated wiring harness and deleted one of the dampner motors. Be sure to replace one wire at a time so not to get confused of wire location. Pretty straight forward repair if you have some mechanical ability. I have never repaired a fridge before, but have done car electronic work.
-
jim from galveston, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
-
51 of 60 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer was freezing, refrig was not cold
Unplugged fridge, removed all screws from inside freezer panel. Removed bracket, fan blade and wires from evaporator motor and swapped motor with new one. Very easy. Professional repairman wanted almost $200 to fix it. Total cost for me was $35 and 25 minutes on a Saturday afternoon. Thanks PartSelect for the quick delivery, low price and tips on the replacement.
-
Norm from Waterford, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
-
Parts Used:5303918549
47 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer cold, fridge warm
My evaporator fan was not working. This fan is located in the freezer section, (top), behind an access panel at the rear. Part of it's job is to blow cold air down into the fridge. At first I wasn't sure if it was the fan itself because after the fridge was unplugged an plugged back in, the fan would run for about 5 seconds then quit. So..I tested the auto defrost timer by manually cycling it with a screw driver, it was fine. I bypassed the defrost thermostat switch, no difference. Finally, I cut an old extension cord and connected it to the fan, it was the culprit.. It didn't run on 120. It did spin for a few seconds on initial power up only. After reading that this model may also have a flakey defrost thermostat switch, I ordered both the fan & new defrost thermostat switch. It was a very easy install for both items. No directions are needed, it's obvious when you get in there. Mine is runnng like a champ again.
-
Darren from Georgetown, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
-
43 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lighting hit the house
first i by passed the timing board, with a ele cord to the fan motor to keep the fridge cool till your parts got here, which was realy fast delivered,
the fan would come on because the board was fried.
it took abot 30 min to install every thind just be carefully unpluging anything.things will break i guess metal eing cold makes the conne4ctors stick together.
evaporator fan is in the frezzer four screws,tested the wires for ohms,and power, when i pluged in the fan i would loss power to the fan,that told me the board was bad, the same night my furnance when to (reaaly) and i lost my borad on the computer ethernet card (lighting isn't fun) it cost to fix everything about 130.00 thanks for thr great parts
the fan would come on because the board was fried.
it took abot 30 min to install every thind just be carefully unpluging anything.things will break i guess metal eing cold makes the conne4ctors stick together.
evaporator fan is in the frezzer four screws,tested the wires for ohms,and power, when i pluged in the fan i would loss power to the fan,that told me the board was bad, the same night my furnance when to (reaaly) and i lost my borad on the computer ethernet card (lighting isn't fun) it cost to fix everything about 130.00 thanks for thr great parts
-
keith from villa rica, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
-
30 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bottom of Refrigerator would not get below 48 degress. Freeezer was working fine.
First I unplugged fridge. I then removed cover that keeps fan protected. I then removed 2 screws that hold the evaporator motor in place. I then removed 3 wires running to motor. Very easy to remove, just pulled connections apart. I then replace the old motor with new.
The Sears repairman wanted to charge me $359 to repair. I did repair for under $40! Amazing what you can save if you have the time and knowlege to do it yourself.
The Sears repairman wanted to charge me $359 to repair. I did repair for under $40! Amazing what you can save if you have the time and knowlege to do it yourself.
-
Jeffrey from Bridgeville, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
-
Parts Used:5303918549
25 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No air flow in freezer or fridge
Snap out fan cover, remove four 1/4" screws, remove back cover, remove defective fan motor, remove fan blade, install new motor and blade, strip wires and hook up with wire nuts, reinstall back cover, snap in fan cover, and plug in fridge.
-
Jim from Au Sable Forks, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Parts Used:5303918549
21 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer worked great, refrigerator would not cool
Removed (unsnapped) plastic cover from back of refrigerator ( inside freezer compartment), determined that the fan was not turning, removed 4 screws from the aluminum back plate in freezer and tilted it down. Removed 2 screws with a nut driver, this allowed the fan to be removed, unpluged fan motor from the bace of the freezer and removed fan. Installed new motor and spent $38.00 to repair the refrigerator that would have cost me severial hundred dollars to replace. Thanks for the help
-
Farrell from Atchison, KS
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
-
Parts Used:5303918549
20 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer is working but not the refrigerator.
Removed the cover inside the freezer. Found out that the motor/fan was not working. Ordered through PartSelect. Got the parts in 3 days. Installed it for less than 30 minutes. Very easy. It saved me hundreds of dollars. We considered buying a new fridge but not anymore. , it only cost me $70 including shipment charges. (Make sure you unplug the appliance first before opening the cover. Remember safety first.)
-
Neptali from Groton, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
-
Parts Used:5303918549
17 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Alexander R - June 4, 2020
Easy repair
Went in nice and easy, 1/2 hour start to finish. Running like new.
ALPHONSO S - May 19, 2020
Great part!
Hello,The part was in great condition and easy to install thanks to the helpful video and my refrigerator back working.Thanks to Part Select! ??
Linda L - May 14, 2020
Fit perfectly
Husband installed part in 10 minutes and has been working great !
Loren E - April 28, 2019
Satisfied Customer
I ordered an evaporator fan motor. The web site was very user friendly. All I had to do is type in my model number and I found the part I needed in seconds. The delivery was prompt. Replacement took 15 minutes and I was ready to cool some beers once again!!
Thank you!
Gary D - November 30, 2018
Not too difficult of a repair but time consuming
The part arrived in great condition and my freezer is working perfectly! My only suggestion is that the pictures that accompanied the instructions are made larger and a little bit clearer as to which wires to cut. The new wiring harness had to be modified to fit my 11 year old and the instructions inside addressed what to do but could have been a little bit clearer as I am a homeowner tackling this job. While the job itself is not difficult it is very time consuming for a first-timer. For example, instead of riding to cut the wires at the junction, let the person know exactly which wires to cut in a larger picture diagram
Audrey D - September 18, 2018
I fixed my fridge myself!
I was so grateful to the folks at PartsSelect who were working on Labor Day and rushed my part to me by mail. The accompanying video gave me the step by step I needed to make the fix without my husband’s help! I have never been more proud!
Monica K - September 18, 2018
Upset
I was sent the wrong part already sent it back waiting for a refund to order the right one a little upset by the mix up
Valerie H - September 12, 2018
Straight forward repair. All wires matched the original.
The part arrived well packaged. Allow a couple of extras days for delivery even if you upgrade the postage class.
Abdul H - August 23, 2018
Works perfect 3 weeks now
Works and fit perfect!
Norman M - August 15, 2018
Easy installation
I followed the video sent with the email which made the installation easy. The next time I need a part I will buy PartSelect. Norm
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3419839
Manufacturer Part Number: 5303918549
Manufacturer Part Number: 5303918549
Brand
Model Number
Description