Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William D - August 19, 2023
Verified Purchase
EASY REPAIR
The wiring harness was easy to replace to difficulty at all, just patients and and determination to get the stove back in working conditions.
★★★★★
★★★★★
Cyril R - March 5, 2019
Verified Purchase
Major project to get to this part.
The part received is not a direct replacement for the original. Wiring harness is different. The components appear to be the same. I plan to use parts from the new wiring harness assembly to replace the worn out parts from the factory harness.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
December 3, 2019
One burner does not "click" nor ignite
For model number 79074133311
Hi Joe, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
July 5, 2021
When turning on left rear surface burner, spark ignitor does not work on that burner, but sparks on right front burner. Wiring harness or switch problem?
For model number 790.74332310
Hello Jeffrey, Thank you for the question. This could be an issue with the Spark Ignition Switches with Wire Harness or the Spark Module. Both parts can be tested for continuity and check for any loose wires. We hope this helps!
I have 2 burners that work, 2 click but won’t light ,1 doesn’t click and won’t turn on, the 1 that doesn’t click will turn on when you turn one of the other burners all burners are clear of debris gas is working fine I would appreciate help
For model number LGGF3043KFS
Hello Danny, Thank you for your inquiry. We would recommend checking the spark ignition switches with wire harness, the spark module, and the spark igniters in the orifice holders. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
