Frigidaire/Frigidaire_Thumb/XA5QX2BS.gif
See part F25 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Multi-Rib Drum Belt

★★★★★
★★★★★
12 Reviews

Rated by 24 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 41771733810!
 Fits your 41771733810!
PartSelect Number PS3408299
Manufacturer Part Number 137292700
Manufactured by Frigidaire
You May Also Need?
Product Description

Multi-Rib Drum Belt Specifications

The multi-rib drum belt is also known as a drive belt and is a part for your dryer. The function of the drum belt is to attach to the motor pulley. It will then spin the drum as the motor rotates. Over time this part will naturally dry out. If your drum belt begins to crack or break, the dryer will not be able to continue to turn. If your dryer is running but your belt will not rotate, that likely means that it has been damaged and needs replacing. The tools you will need for this repair are a putty knife and a screwdriver set.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not tumble | Noisy | Will Not Start
This part works with the following products:
Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 137292700 replaces these:
AP4565702, 1615170, 134163500, 134503900, 5303283287
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JERRY
February 24, 2018
What is the length of this belt?
For model number FFLE1011MW2
Hello Jerry, Thank you for your inquiry. We are showing it is approximately 89 inches long. Hope this helps!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Phillip
February 27, 2018
The broken belt that came off is 90 x 1/4 4 rib. I keep seeing belts at 89 i just want the right belt so i can get my wet clothes dry what is the right belt for me????
For model number FLSG72GCSA
Hello Phillip, thank you for your question. The part number for the belt is 137292700. This part is the OEM part recommended for your appliance. The original belt is measuring a bit larger because it has been stretched over time. Please enter the part number into the site for current price and availability. Good luck with your repair!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Ted
October 11, 2019
How to change the belts on the dryer.This is a combo unit.
For model number 41793802200
Hi Ted, thank you for your question. We actually have a customer that wrote in with a comprehensive installation for this part: "Well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it" . I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Angela
September 28, 2021
does this part works for the dryer of the Frigidaire stackable? Model FEX831CS0, Serial XE64806330 Thanks.
For model number FEX831CS0
Hello Angela, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX3408299. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Don
February 9, 2022
New dryer belt is so tight drum does not rotate. Is there more than one belt for this model dryer?
For model number FEX83ICS0
Hello Don, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS3408299. We suggest checking the Pulley to make sure it does not need to be adjusted. We hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Charles
April 18, 2022
Looking for dryer belt for Gibson spacemaster combo washer/dryer. What other makes are the same as this Gibson.
For model number EL27M6WAFB
Hello Charles, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX3408299 for the Drum Belt and Fix Number: FIX1146950 for the Drive Belt. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Earl
25 days ago
I need to order a specific part for my dryer. But I don’t know what it’s called. I know what it looks like and where it’s located I even have a picture of it. On the very back of the dryer inside, there are two sensors mounted to the upper left-hand corner on the inside the dryer behind the drum. I know that the top left sensor is a Thermal limit sensor. But I don’t know what the other one is called and it is the one I need.
For model number Fex831cs0
Hi Earl, thank you for contacting us. The two mounted sensors on the upper left-hand corner inside the dryer are Thermal Limiter, part number PS419402, and the High Limit Thermostat, part number PS446428. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Was this helpful?
Thank you for voting!
Related Parts:
Ernest
August 13, 2019
Re: Multi ribbed belt (partselect no.:ps3408299):what is the length of the belt?
For model number frigidaire Model: fflg4033qt1
Hello Ernest, thank you for your question. This replacement Multi-Rib Drum Belt for your model is approximately 89.5" long. Good luck with your repair!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 24 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
squeeking like crazy
well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it. it`s easy...parts came very fast....Thx PartsSelect.com...i`ve told all my friend`s about PartsSelect
Other Parts Used:
Grounding Ball Clip Grounding Ball Drum Support Bearing Ball Hitch Dryer Drum Bearing Bracket
  • Steve from Wheelersburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
126 of 144 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud squeaking noise from dryer
This is a combo washer/dryer. First, I replaced the Idler Arm pulley but the noise didn't stop - it was easy to replace with two screws holding a access panel door in the back of the unit. Next I had to take off the front of the dryer unit to access the drum bearing and replace the dryer belt. There were many screws and electrical connections to remove. After replacing the drum bearing, there was a plate on the back that had to be held while attaching the screws from the front. Since I was alone, I taped the plate in place to hold it while I attached the screws.
Other Parts Used:
Knob IDLER ARM Assembly Drum Support Bearing
  • Matt from San Leandro, CA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
99 of 170 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't turn, but did make awful sound
Unplugged the washer/dryer combo unit from the wall.

Slid the unit forward on plastic bags until back and side were accessible (being careful of the dryer duct and washer water lines).

Removed the vented plate on the back to access the motor and idler arm using a LARGE-HEADED Phillips-head screwdriver.

Pulled out the broken belt.

Removed 10 of the 11 screws holding the top on (leave the center front one; undo the front corners last, taking care not to let the front panel slip forward — it supports the drum).

Opened the dryer door and gently pulled the front plate forward, supporting the drum from the inside with one hand so it didn't fall.

Worked the belt around the drum and between the front of the drum and the front panel. Held it mostly taut around the drum to slide it back to the existing belt mark. Grooved rubber side of the belt goes on the inside.

Pushed the front panel back into position while seating the drum on it. Temporarily attached the top with two back and two front screws. (The front panel overlaps the top; the top goes over everything else.)

Scratched my head trying to figure out how the belt goes around the motor shaft and idler arm; searched the web; searched the web some more.

Routed the belt left-to-right over the idler arm pulley, pushed the idler arm to the left, routed the belt around the motor shaft and then up over the drum.

The idler arm should (a) press on the OUTSIDE of the belt, (b) take up all the slack in the belt, and (c) not touch the motor shaft (touching it is what causes the awful noise). The belt should contact the motor shaft past the two nut-like things on the shaft (not between them).

Plugged the unit in and turned the dryer on to test it.

Replaced the other 8 top screws; replaced the vented plate on the back.

Wondered how I ever took having a clothes dryer for granted.
  • Molly from Washington, DC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
34 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Belt
I read the others repair story and it was a easy repair, my wife had a repairman come out and check it already, he stated to her that it was a major repair and that he needed to take it to the shop for repair, well he was full of sh##!!! The unit is a stackable washer dryer,if the screws inside the drum backout, the belt comes off and caused mine to brake the belt,my wife found the 2 small screws in the bottom of the tub,theres a small cover on the back that you remove and you can see belt drive pully! Follow the directions that have been explained on others listed it"s easy!!! Mike
  • mike from perry, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
16 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Dryer Drum Would Not Move. Motor Worked But Drum Didnt.
First I read the manual on how to replaced the dryer drum belt. Second I took off the front panel. This would involving taken all screws from the top of the dryer face and the front panel. Thirdly I removed the exhaust attachment. Then I saw that the belt broke. Really it looked torned apart. I believe too heavy of a load in dryer. I then installed the new belt and reversed everyhing I did to start. The dryer runs great. This is not that bad of a job. If you can do it yourself, why pay hunreds on a service man to do the job.
  • steven from parrish, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer bearing failure
From previous responses on this site. I just followed their lead. If I had not found these folks, and the responses, it would have been a nightmare. It looked like and I thought the dryer came apart from the back! But in reality it comes apart from the front!! Absolutely fantastic site and help. Fast shipping, I ordered on Wednesday before Labor Day, didn't expect the parts until the following Wednesday, but received the parts on Saturday morning, and had the dryer back running by Sunday AM. Never even ran out of clean clothes!!!!!
Other Parts Used:
Ball Hitch Grounding Ball Clip Grounding Ball Drum Support Bearing Dryer Drum Bearing Bracket
  • Douglas Green from Kansas City, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
squeaking in dyer progressively got unbearable
removed top and front panel on stackable dyer unit. 3 screws at back of the inside of the drum, and the drum was out. installed new bearing and belt and all was good.
Other Parts Used:
Drum Support Bearing Dryer Drum Bearing Bracket
  • matt from south vienna, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drum wouldn't turn
I removed the front access panel above the washer and removed the top dryer front panel. Then pulled out the drum and noticed the drum support ball stud had broken off, rather than order a new one, I welded it back on with a mig welder. I then replaced the drum support bearing and reinstalled the drum. I then installed the new belt before placing the front top panel in place. I removed the small vented panel on the back side to access the belt tensioner and fit the belt around the pulley and motor shaft. The whole job took less than an hour.
Other Parts Used:
Drum Support Bearing
  • Keith from Midwest City, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing
Customer responses / directions were great nothing to add - except no where does anyone mention "high temperature grease" for the Drum Support Bearing - only on the video is it mentioned numerous times. I honestly think it took longer to vacuum out all the lint then it did to do the repairs.
Other Parts Used:
IDLER ARM Assembly Drum Support Bearing
  • Diane from MADISON, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drum was squeaking and running slow
Removed drum replaced bearing with kit, replaced both front drum seals and drive belt. The only problem was when replacing the rear drum ball the three screw holes were poorly tapped and took several tries to get them in. The manufacturers could easily fix this problem. They could provide self tapping hex head screws instead of the Phillips head screws. Everything else went very smoothly.
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal Rear Drum Bearing Kit
  • Terry from TENINO, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.5
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3408299
Manufacturer Part Number: 137292700
Brand
Model Number
Description
Kenmore
41761722511
Washer Dryer Combo - Laundry Center
Kenmore
41761723511
Washer Dryer Combo - Laundry Center
Kenmore
41761732810
Washer Dryer Combo - Laundry Center
Kenmore
41761732811
Washer Dryer Combo - Laundry Center
Kenmore
41761733810
Washer Dryer Combo - Laundry Center
Kenmore
41771712512
Washer Dryer Combo - Laundry Center
Kenmore
41771722512
Washer Dryer Combo - Laundry Center
Kenmore
41771723512
Washer Dryer Combo - Laundry Center
Kenmore
41771732810
Washer Dryer Combo - Laundry Center
Kenmore
41771733810
Washer Dryer Combo - Laundry Center
Kenmore
41771733811
Washer Dryer Combo - Laundry Center
Kenmore
41790802990
Washer Dryer Combo
Kenmore
41790802991
Washer Dryer Combo
Kenmore
41790802992
Washer Dryer Combo
Kenmore
41790807990
Washer Dryer Combo
Kenmore
41790812990
Washer Dryer Combo
Kenmore
41790812991
Washer Dryer Combo
Kenmore
41790812992
Washer Dryer Combo
Kenmore
41790814000
Washer Dryer Combo
Kenmore
41790814001
Washer Dryer Combo
Kenmore
41790814002
Washer Dryer Combo
Kenmore
41790817990
Washer Dryer Combo
Kenmore
41790862990
Washer Dryer Combo
Kenmore
41790862991
Washer Dryer Combo
Kenmore
41790862992
Washer Dryer Combo
Kenmore
41790872990
Washer Dryer Combo
Kenmore
41790872991
Washer Dryer Combo
Kenmore
41790872992
Washer Dryer Combo
Kenmore
41791702000
Washer Dryer Combo
Kenmore
41791702001
Washer Dryer Combo

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service