Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
July 3, 2019
Display panel is not responding when choosing wash settings and ‘start’ selection.
For model number MDBH979SAM0
Hi Jim, thank you for your question. If your panel is not responding then you will have to check your control panel/touch panel and your control board. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Guillaume
October 28, 2019
I would like to buy 2 screws located on nboth sides of the dishwasher to fix firmly these 2 sides . There ara 2 little holes on wich tere are 2 plastic cap plugs to put over these 2 screws to avoid water drops
For model number KUDS30IXSS1
Hello Guillaume, Thank you for the question. The Screws are only listed as part of the Spacer. We strongly recommend you contact the manufacturer, as they would know if the screws are sold. Ask them for the part number you require and contact back to see if it is something we carry. Hope this helps!
Was this helpful?
Thank you for voting!
LTC
October 22, 2024
on the right upper front basket the pin holding the roller broke off. The roller will no longer stay in the roller frame. What part do I need and how do I repair
For model number 665-13222N414
Hi LTC,
Thank you for your question. If the pin that holds the roller broke, you will need to purchase the rack adjuster kit, part number PS10065979. Whirlpool has redesigned the rack adjusters, so they are now made of metal and not plastic. The kit includes both the left and right side rack adjusters and both sides will need to be replaced. We hope this helps!
