This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
Replacing your KitchenAid Dishwasher Lower Dishrack Wheel
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
Part# W10195416 replaces these:
W10195416V, W10195416VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
394 Reviews
4.8
Filter By Rating:
5 Stars
348
4 Stars
29
3 Stars
7
2 Stars
3
1 Star
7
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kathy Y - June 1, 2024
Verified Purchase
Fits perfectly and works great. Easy to install.
Fits perfectly and works great. Easy to install.
★★★★★
★★★★★
Paige T - June 24, 2024
Verified Purchase
Easy replacement, works great
The wheels had really fallen off our old parts, so we ordered a set of four to replace the whole set. They were easy to pop off and have been working smoothly ever since.
★★★★★
★★★★★
Pamela M - January 25, 2025
Verified Purchase
Easy to install
I’m very pleased. My part arrives quickly and was so easy to use.
★★★★★
★★★★★
Robert R - January 16, 2025
Verified Purchase
Easy Repair
The part was in great condition, came fast and was easy to install.
★★★★★
★★★★★
Henry *Gilson S - February 5, 2025
Verified Purchase
Exactly what I needed
Ordered four sets so that I could replace all wheels at one time. Easy to install and got the lower dishrack back in operation.
★★★★★
★★★★★
Karen S - March 1, 2025
Verified Purchase
Replacement part good as the original
Part fit perfectly and was easy to install.
★★★★★
★★★★★
Lamar B - April 25, 2025
Verified Purchase
Easy repair, great part, worked as expected
Arrived right away, save me from buying a new dishwasher
★★★★★
★★★★★
Ginger G - May 9, 2025
Verified Purchase
Great shopping experience
Easy to look up part, order and receive. I am a 74 year old woman and installed them myself!
★★★★★
★★★★★
Delphine M - April 12, 2025
Verified Purchase
Lower dish rack wheel replacement
Replaced all 4 wheels. Parts were easy to replace.Efficient and responsive service!
.
★★★★★
★★★★★
William S - April 10, 2025
Verified Purchase
Easy Repair
Not much to do here: clip wheel pieces to the bottom of the bottom rack. All done.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 28 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bottom Rack Wheel Assembly
Installation was very easy. The online video was excellent and clear. Thanks
Albert from LIBERTY TWP, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the bottom ‘basket’ are only fastened by a ‘Snap-in’ (plug) style connector that gets brittle and breaks over time
Pop off the shell assembly from the bottom basket and clip/click on a new wheel assembly.
Plastic pieces had broken on both the top and bottom racks
The parts select site had an excellent breakdown of what I needed to replace. When I got the pieces, however, it wasn't so apparent how to do it. I actually used YouTube video to show the process.
The trickiest part was actually uninstalling the broken pieces. I had to work backwards through the YouTube video.
The o
... Read morether tricky bit is having a sense of how hard you can push to snap plastic pieces in and out.
Also, watch the whole video! I didn't, and I ran out for a tool (a star driver, I think that's what it's called) that was actually in the bag of screws that came with the assembly.
It seems like Kitchen Aid realizes they have a problem with plastic fatigue, because they have replaced some of the plastic parts with metal.
If you take your time and stay organized this is a very doable repair.
Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!
Linda from TRES PINOS, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels fell off
These wheel assembly that came on the lower rack of my dishwasher were junk! They started falling off within 6 months. I put them back on to the point that the pin in the center of the wheels would no long stay in place, thus the frustrating situation of the wheels falling off often.
Assembly was easy peasy!
Jan B. from BEAVER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broke off the lower rack on my dishwasher.
Just snapped in the wheel assembly very easy.
Marvin from WANTAGH, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack's wheels broke, all 4 pairs
With a little pressure, I was able to push off the broken wheel pieces with my thumbs. I was able to snap on the new wheel pieces really easily. This job took less than 15 minutes to replace all 4 wheel pieces.
Carrie from SAN TAN VLY, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced wheels on lower rack
My husband did the repair. It was very easy. He basically just popped off the old wheels and popped on the new ones.
Jane from JOLIET, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
December 11, 2023
How many wheel assemblies come in the order?
For model number WDT910SAYH0
Hello Susan, thank you for reaching out. The dish-rack roller is sold individually. We hope this information helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
November 21, 2023
For a broken wheel on bottom rack can I replace the wheel only or do you have to replace whole wheel assembly ?
For model number MDB8959SFZ4
Hi Lawrence, Thank you for writing. The Wheel is not sold on its own sorry, the whole Wheel Assembly will need to be replaced. We hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
May 5, 2024
I lost a pin that holds the wheel on the bottom dish rack. Is there some way I can purchase a couple of pins only or do I have to buy the entire wheel mechanism?
For model number KUDC10IXWH4
Hello Susan, thank you for reaching out. You will need to buy the whole lower dishrack wheel, part number PS3406971. If you need help placing an order for it, please feel free to give us a call!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Abdul
May 28, 2024
the top mashine at the end of the sycle dosent drain the water.
For model number KUDD03DTSS3
Hello Abdul, thank you for contacting us. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If this is not the issue, you will need to replace the drain pump, part number PS11743087. Good luck with the repair!
I need to replace the wheel on the dishwasher’s lower rack. What is the correct part number? Thanks
For model number KUDC10FXSS3
Hi Rich, thank you for getting in touch. The lower dishrack wheel kit for your model is part number PS3406971. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lauren
February 25, 2024
Hi, do these wheels work with the above model?
For model number JDB9000CWS2
Hello Lauren, thank you for your your question. No. The correct Lower Dishrack Wheel is PS11750057. Good luck and have a great day.
Tell me, how do you remove lint from an electric Maytag dryer? It comes with NO user manuel but stresses the importance of cleaning the lint out. I clean the pull out filter in the dryer...but how can I clean out the lint screen housing?
For model number MED6230HW3
Hello Dan, thank you for getting in touch. You can remove the lint from the lint screen housing by following these steps:
1. Use a vacuum cleaner to remove any lint that has accumulated in the lint screen housing.
2. Dampen a cloth with water, but make sure it's not soaking wet. You can use a mild detergent if necessary, but be sure to rinse the cloth thoroughly to avoid leaving any detergent residue.
3. Gently wipe the lint screen housing with the damp cloth to remove any debris or dust. Be careful not to push any lint further into the housing.
4. Use a dry section of the cloth to wipe the area clean and remove any moisture.
We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3406971
Manufacturer Part Number: W10195416
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":3,"name":"W10195416","title":"W10195416","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
