Part Location Diagram of 330031 Whirlpool Surface Burner Plug-In Block Kit
See part 41 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Burner Plug-In Block Kit 330031

 Fits your FEP310BW1!
★★★★★
★★★★★
17 Reviews

Rated by 49 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 13.42
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your FEP310BW1!
PartSelect Number PS340571
Manufacturer Part Number 330031
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Surface Burner Plug-In Block Kit Specifications

The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Whirlpool, Amana, Roper, Caloric.
Part# 330031 replaces these:
AP3075808, 3374, 330031, 0009336, 0042147, 0042153, 0045536, 0045546, 0051088, 0054794, 0067069, 0071930, 0071931, 0075054, 0086726, 0088866, 0089227, 0089291, 0089336, 0090094 ... Show more , 0300678, 0308306, 0308408, 0C00101999, 12001673, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14210242, 14254131, 1430-292, 1430292, 258858, 258864, 293798, 304645, 312605, 3147829, 3169190, 3176638, 318960, 330031, 330031A, 343824, 4164317, 4165235, 4165241, 4179038, 42147, 4315237, 4320363, 4320364, 4320365, 4320366, 4320367, 4320781, 4321228, 4332751, 4332999, 4335063, 4335480, 4338440, 4338510, 4342636, 4343198, 4343235, 4355480, 4362508, 4362529, 4363088, 4364178, 4371379, 4371919, 4372889, 4378608, 4389596, 5-50226, 5303935058, 550226, 560467, 7-66339, 7112P059-60, 71930, 74-06-132, 7401P014-60, 766339, 786212, 816185, 865699, 865700, 865701, 865702, 865703, 865719, 865741, 865749, 866080, 866083, 866144, 866227, 868000, 868464, 868599, 877578, 877579, 877610, 877618, 877632, 877796, 877977, 878407, 89336, 96610P01, 96852P01, 99989649, 9E28000199, B5015402, C2711501, C2716501, C2735201, FSP330031, GE WB17X210, M300, M5D117, M5D71, R0157519, R0157526, R0157932, R0167091, R0167117, R0181149, R1575-19, R1670-91, W10116799, W10116803, W10841094, WB17X210, WCI5303935058, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149 Show less
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JAMES
February 12, 2018
The surface burner plug-in kit shown to replace my burner shows two wires with only one clip on each end. How do i attach the other end. There should be clips on either end, clips to attach to the burner block and clips to attach to the control box. Please give me an explanation
For model number kitchen aid model# KECS-1040
PartSelect logo
Hello James, thank you for your question. To attach the other end of the wire, cut old wire that are attached to surface plug in block, strip the wire, and attached new plugin kit. The kit will come with two ceramic wire nuts, as well as some shrink material that can be placed over the end of the wire where the wire nut is and warmed up with a hair dyer to shrink and seal where the wire was reattached. There are some installation instructions from other customers on our site that might be helpful as well. Good luck with your repair!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
November 28, 2017
Will it work on this stove?
For model number RF3020xyw2
PartSelect logo
Hi Chris, Thank you for your question. Yes, this part works with your model. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
January 19, 2018
The Whirlpool surface unit terminal block replacement package contains 10 individual pieces. The instructions do not address assembling the terminal block (the instruction, in fact, presumes that the terminal block is already assembled) but only explains how to attach two wires together with a wire nut. The components of the terminal block do not fit together. What do you recommend?
PartSelect logo
Hello Tom, Thanks for your question. Snap the bracket onto the terminal block. There will be two wires you will need to push into the terminal block, which will then lock (spin them around if they do not). Take the wire nuts and the heat sink and reattach them to the harness. The bracket that fits with the terminal block can vary from model to model - not all of them are the same. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lenore
February 13, 2019
I bought this stove about 1 1/2 yrs ago from abc warehouse. The surface burner plug-in block kit went bad. I have had numerous parts sent to me from numerous parts companies. They have all been wrong. The part that you show on your web site shows what the part actually looks like. Part# 5303912666. The metal holder for the rubber plug ins must look someone like a "v" which this one does. I really want my front left burner to work again. Is the part shown actually the part that i will receive?Thank you for your time
For model number FFFEF3012TWB
PartSelect logo
Hello Lenore, Thank you for the question. This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts. We do have a 30 day return policy and if incorrect and will not work we will refund you in full since it is listed as a compatible part for your model. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ed
February 25, 2019
I'm not sure about what i'm looking at here. Is this kit for one burner plug or two plugs?Thanks
For model number RF3165XPW
PartSelect logo
Hello Ed, Thank you for contacting us. This works on a single element with a two prong connection. Have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bob
July 15, 2019
Do you have a burner receptacle kit to fit this kitchen aid cook top?
For model number KEDS100VBL0
PartSelect logo
Hi Bob, Thank you for your question. There is no receptacle kit listed under your model number. There is a receptacle mounting clip listed under your model number. The part number for it is PS11742373. This part is sold individually. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Stan
November 17, 2019
Is there any reason this kit would not work with my model# (rc8200xbh1)? I am not sure what the difference would be. I am looking to replace both the burner receptacle and burner. Thank you, stan
For model number RC8200XBH1
PartSelect logo
Hello Stan and thanks for writing. No. Part #PS340571 is not in the list of compatible items for your model. Hope this helps. Please contact us anytime. There seems to be not such kit that matches your model. Part #PS340571 may fit with your unit, however, as this part does not show as being compatible with your model number, we can not guarantee that it will fit. Please contact us anytime. We would suggest contacting the manufacturer directly. We hope this helps. Please contact us anytime

Was this helpful?
Thank you for voting!
Richard
February 13, 2020
The block kit you have online don't look like the one that's on the stove
For model number esd345
PartSelect logo
Hi Richard, Thank you for your question. The part number listed under your model number for the surface burner block assembly is PS340571. The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. We hope this helps. Thank you and have a great day.

Was this helpful?
Thank you for voting!
Charles
March 26, 2023
can I get 4 blocks in a "4-pack" at less cost than 4 single costs?
For model number 330031
PartSelect logo
Hello Charles, Thank you for your inquiry. We can only sell the parts as they come from the manufacturer, and this particular part number does not come as a 4 pack. We would be happy to check to see if there is a 4 pack available but we will need the model number of your appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

Was this helpful?
Thank you for voting!
  • 1
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 49 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Replaced power burner, burner trays, and electrical socket for power burner
Repair went fine, part replacement was identical. Everything is in working order again. My cooktop is 26 years old.
Other Parts Used:
Burner Surface Element - 8 Inch Drip Bowl - 6 Inch Drip Bowl - 8 Inch
  • Thomas from ST FRANCISVLE, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven bake heater was bad. 8" burner socket went bad from loose connection burner connection got ruined.
two Phillips head screws hold the oven unit in. It culls out and the wires just disconnect. Reinstall in reverse and test.. The burner socket I cut the wires from the old socket and splice the new pigtails onto the existing wires and install the socket. The instructions in the package are good for people that aren't used to doing repairs.
Other Parts Used:
Surface Burner - 8 Inch - 2600W Bake Element - 2600W 240V
  • Stephen from MIDDLETOWN, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
N/A
I followed the instructions provided.
  • Gerry from Mackay, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screw hard to get off
Drilled a pilot hole with a 1/16 th drill bit and tapped off screw head.
  • Lawrence from BROOKSVILLE, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Defective surface burner
Removed all surface burners from range, removed range top screws, and suspended range top. Removed plug-in block mounting screw. Cut wires for plug-in block close to original wire-nut junction. Inserted contacts & wires from kit into plug-in block. Slid a provided shrink sleeve onto each wire. Stripped wires on range wires and then connected them to the plug-in block wires with the provided high-heat wire nuts. Selected one of the two provided plug-in block brackets that matched the original bracket on the range. Used a butane lighter to shrink the shrink sleeves over the wire nut connections. Snapped the appropriate bracket onto the plug-in block. Reassembled everything in reverse order and plugged in new element. Note: my only two issues are that the two high-heat wire nuts provided in the kit were a bit too small for the wire gauge in my Whirlpool range. It took some fiddling on my part by carefully re-stripping the range wires to get the wire nuts twisted on securely. Two more wire nuts of the next size up would have been appreciated. Also, I found that the provided plug-in block mounting screw did not find fit my range. No problem; I simply re-used the original screw. All in all, an easy repair and the element works perfectly.
Other Parts Used:
Surface Burner - 8 Inch - 2600W
  • Joseph from RICHMOND, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove Burner wouldn't heat up
Someone did the repair for me.
  • Donna from Sandwich, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One burner didn't work all the time the other would go red hot
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves over the new wires, then I placed the new wire beside the wire I stripped on the stove and screw on the wire cap making sure it was tight. I repeated this three more times, once I had all four wires connected I then placed the sleeves over the connections and heated them up until they were formed around the connection. Once I had all the connections done I placed one wire at a time into the plug-in block until it locked into place ( I looked at my old plug-in blocks first to make sure I placed the new wires in the correct way ).I then used the metal mounting bracket that matched my old ones and snapped the correct one onto each plug-in block. Before mounting them onto the stove I compared them to my old ones to make sure they were correct. Then I used the new screws to mount them to the stove. I took a second look at everything I had done before closing the top cover of my stove. After lowering the cover back into place I put both the drip covers in place and then installed the burners.I then plugged the stove back into the outlet and tried the burners. This was very simple and the video on the web site shows this very well which made my job very simple.
  • Phillip from Pekin, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat from burner
I raised the stove top, read the instructions to my son while he did the work, then I lowered the stove top, installed the burner, and it worked like magic.
  • George from ST. Charles, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wire broken going to one electric plug for burner
Replace the connector and bracket, spliced the wires, put heat to the schrink wrap and I was done.
  • John from Shelby Township, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace burner coil connector
Cut the two wires approx 1 inch behind old connector and removed one screws to remove old connector, stripped approx 3/4 inch off the wires and connected them to the new wires on the new connector with wire caps and shrink wraps which came with the new connector. Replaced the old screw with the new screw and the job was completed. Be sure and disconnect power before starting!!
  • dicky from mcrae, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.5
Filter By Rating:
  • 5 Stars
    14
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    1
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS340571
Manufacturer Part Number: 330031
Brand
Model Number
Description
Kenmore
101936630
Range - Kenmore Range/Stove/Oven Model 101.936630 (101936630, 101 936630) Parts
Kenmore
101936634
Range - Kenmore Range/Stove/Oven Model 101.936634 (101936634, 101 936634) Parts
Kenmore
101938630
Range - Kenmore Range/Stove/Oven Model 101.938630 (101938630, 101 938630) Parts
Kenmore
101938635
Range - Kenmore Range/Stove/Oven Model 101.938635 (101938635, 101 938635) Parts
Admiral
1058AH-W
Range - Electric
Admiral
1058AH-Z
Range - Electric
Admiral
1058WH-W
Range - Electric
Admiral
1068F-CZ
Range - Slide-in, Electric
Hoover
1151AJ-30
Cooktop
Admiral
1151AL-30
Cooktop
Hoover
1151WJ-30
Cooktop
Admiral
1151WL-30
Cooktop
Roper
1346*0A
Range - GAS RANGE
Whirlpool
1346^0A
Range
Roper
1346W0A
Range - Freestanding, Gas
Roper
1347*0A
Range - GAS RANGE
Whirlpool
1347^0A
Range
Roper
1347W0A
Range - Freestanding, Gas
Roper
1355*0A
Range - GAS RANGE
Roper
1355*1A
Range - GAS RANGE
Roper
1355*2A
Range - GAS RANGE
Roper
1355*3A
Range - Range (gas)*
Whirlpool
1355^0A
Range
Whirlpool
1355^1A
Range
Whirlpool
1355^2A
Range
Whirlpool
1355^3A
Range
Roper
1355W0A
Range - Freestanding, Gas
Roper
1355W1A
Range - Freestanding, Gas
Roper
1355W2A
Range - Freestanding, Gas
Roper
1355W3A
Range - Gas
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service