Part Location Diagram of 285587 Whirlpool Thrust Spacer
See part 20 in the diagram
Replacing your Whirlpool Washer Thrust Spacer
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Thrust Spacer 285587

 Fits your 4KMTW5405TQ1!
★★★★★
★★★★★
8 Reviews

Rated by 76 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 7.62
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 4KMTW5405TQ1!
PartSelect Number PS334562
Manufacturer Part Number 285587
Manufactured by Whirlpool for Whirlpool, Kenmore, KitchenAid, Maytag
Product Description

Thrust Spacer Specifications

This is a genuine OEM thrust spacer for your washer, and is also commonly known as a retainer ring. The spacer is about 2.5 inches in diameter, is made of plastic, and is white in color. It is used in the agitator assembly of many direct drive washing machine models. The spacer is fitted between the agitator and the agitator auger to support it as it moves. This part is sold individually. Although it is not included in this part, you should have some dual-action agitator grease for the repair as well.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Washer Thrust Spacer

Replacing your Whirlpool Washer Thrust Spacer
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Spins slowly
This part works with the following products:
Washer.
Part# 285587 replaces these:
AP3094463, 3132, 285587, 285587, 285587VP, 3350389
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.5
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 76 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Agitator loose spinning
Three of the four agitator cogs had broken. The agitator was able to spin freely both clockwise encounter clockwise which it should not be doing. I replaced the cogs as well as a couple additional parts just to be sure but the cogs were the important one. Very easy.
Other Parts Used:
Agitator Cam Bearing Agitator Directional Cogs Thrust Spacer
  • Matthew from AUSTIN, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
19 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator directional cogs worn out
Removed bolt holding top of agitator, removed top of agitator. Replaced parts. Reinstalled agitator. An old machine now works like a new model.
Other Parts Used:
Agitator Cam Bearing Agitator Directional Cogs Thrust Spacer
  • Do n from LAWTON, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not agitate
Exactly as shown in your video
Other Parts Used:
Seal, Inner Cap Agitator Cam Bearing Agitator Directional Cogs Thrust Spacer
  • john from RAY CITY, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't agitate
Removed lid panel changed lid lock switch. Took cap off removed 7/16 bolt changed out thrust spacer and agitater repair kit. Took about an hour.
Other Parts Used:
Lid Latch Assembly Agitator Repair Kit Thrust Spacer
  • HOWARD from MIMBRES, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Once water filled up it would kick off and no action from the agitator..just a buzzing sound..
Following the instructions from the email received from this site was very helpful...given the washers were slightly different then mine in the videos ...it gave me a solid view point of what I would expect...my thrust spacer and the one I was sent was different in length and luckily it wasn't needed for my repair..extremely affordable prices made this no big deal at all..The inner seal was easily exchanged out and the agitator direction cogs were simply replaced..they were a bit wore down but nothing broke...and the reassemble was easy...biggest trouble I had were the clamps holding the switch box on the top they were pretty simple to remove by the instruction video and the direct drive coupler was exactly like the video instructed and was simply replaced..again nothing broke but extreme wear on the inner square was nearly wore to more of a circle shape which I believe was my problem. .The clamps holding the top back in place we're very tricky for me but I got them...plugged everything back up turned it on and the washer filled up and then kicked back into action just like new...I was very happy as well as was my wife to fixed what normally would have been 400 to 500$ repair bill or twice that for a new washer for 4 parts under 30$ and it's now just like new..Thank you !! I will definitely be ordering again from you if and when needed and also give a 100% satisfaction rating to any 1 needing parts..5stars!!!
Other Parts Used:
Seal, Inner Cap Direct Drive Motor Coupling Agitator Directional Cogs Thrust Spacer
  • Jeremy from MORRISTOWN, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Socket extension should be at least 10 inches long. Need two people to do the job if the screw is very tight.
Watch the instructions video. Follow the exact instructions carefully.
Other Parts Used:
Seal, Inner Cap Agitator Bolt Agitator Grease Agitator Repair Kit Thrust Spacer
  • Bruce from UNION, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of agitator not working
Followed video and included instructions and had no problems, went very well.
Other Parts Used:
Seal, Inner Cap Agitator Bolt Bleach Dispenser - White Agitator Grease Agitator Repair Kit Thrust Spacer
  • christopher from CLINTON, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I happened to have the lid open when agitation began. I heard grinding, and the top of the agitator wasn't moving much.
I shut the machine off and came to the site . I got the impression that it could have been several things. I made the wash and rinse very brief to minimize further damage. My clothes didn't get clean. I just had to pop the hubcap and remove a 7/16 hex head screw to see there was no damage but broken dogs. I hadn't needed to abort the wash. I think they've been broken 15 years but didn't happen to make noise before. if the top piece of the agitator were called the circulator, I would have figured it out years ago. On full loads, clothes didn't circulate very well and tended to come out with deposits of lint. I think friction from a coating of soap scum kept the circulator moving enough to fool me, but it wasn't doing its job. I heated baking soda in water on the stove to make washing soda. I soaked the parts to remove soap scum, paying special attention to the ring of cogs that the dogs would engage. I replaced the thrust spacer because it was cracked. I didn't feel any grease or see any wear, so I think the only function for grease would be to prevent squeaks. Now, with a full load, clothes and water circulate better than I remember.
Other Parts Used:
Agitator Directional Cogs Thrust Spacer
  • Stephen from GROVER, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper agitator not turning.
Removed agitator cover with small screwdriver. Removed bolt holding agitator with socket on 6" extender. Pulled agitator up and out. Replaced thrust spacer adding tiny amount of silicone grease. Replaced agitator directional cogs adding small amount of silicone grease. Note direction of cogs first or they will make a loud ratcheting noise. Reassemble. The drawing on this site is helpful.
Other Parts Used:
Agitator Directional Cogs Thrust Spacer
  • David from MILLBRAE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top section of agiatort wouldn't rotate
called daughter's boy friend
Other Parts Used:
Agitator Directional Cogs Thrust Spacer
  • Beverly from WEST FALLS, NY
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Erin
May 14, 2018
Hello i have a Roper washing machine that will fill with water and spin, but the agitator only seems to move about 1/2 an inch (maybe 1/30 of a rotation) back and forth. I replaced the dog ears and thrust washer and the splines on the drive block appear normal. If i spin the agitator by hand it moves (with what feels like normal friction) and the dogs catch as they should. Any thoughts or advice would be much appreciated!
For model number RTW4340SQ0
PartSelect logo
Hello Erin, thank you for your question. To diagnose the agitating problem, I would recommend pulling the agitator out and see if the shaft is rotating to move the agitator when in the wash cycle. If not then it is a problem with the gearcase. If it is then the agitator splines may not be catching on the shaf, and would need to be replaced. I hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Rebecca
February 4, 2022
Spins but clothes are still soaking wet?
PartSelect logo
Hello Rebecca, thank you for writing. The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly. . For us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number, please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kathy
March 16, 2023
Need a Thrust Spacer (washer) for my Whirlpool washer model lxr9245eqz
For model number LXR9245EQZ
PartSelect logo
Hello Kathy, thank you for contacting us. The thrust spacer compatible with your model is part number PS334562. We hope this is helpful!

Was this helpful?
Thank you for voting!
Richard
April 14, 2023
thrust washer is thin with 4 sides
For model number kenmore 110 269245 03
PartSelect logo
Hi Richard, thank you for reaching out. Based on our research, the thrust washer, part number PS11744870, is compatible with your model. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Orlando
February 20, 2020
How do i replace o ring and where can i find replacement o ring?
For model number LSR94PQ4
PartSelect logo
Hello Orlando, thank you for your question. The o ring that goes inside the agitator is PartSelect Number: PS11748108. Please enter the part number into the site for current price and availability and to order. Good luck with your repair!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334562
Manufacturer Part Number: 285587
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11016512690
Washer
Kenmore
11016512691
Washer
Kenmore
11016512692
Washer
Kenmore
11016602691
Washer
Kenmore
11016602692
Washer
Kenmore
11016602693
Washer
Kenmore
11016611690
Washer
Kenmore
11016611691
Washer
Kenmore
11016611692
Washer
Kenmore
11016612690
Washer
Kenmore
11016612691
Washer
Kenmore
11016612692
Washer
Kenmore
11016812500
Washer
Kenmore
11016812501
Washer
Kenmore
11016812502
Washer
Kenmore
11016812503
Washer
Kenmore
11016872690
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service