Centerpost Bearing and Seal Assembly Specifications
This assembly comes with one transmission stem seal, two center post bearings, and three agitator shaft seals.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# 285203 replaces these:
AP3020440, 470615, 285203
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lowell A K - January 20, 2021
Verified Purchase
Fine parts
The parts were a perfect match and all went well. I had to watch a video on a competitor's website to make sure I was installing the seals correctly. The illustration of the parts plainly shows instructions included. My parts sure didn't have them. I wish I would have ordered spin pinion seal and the upper transmission seal. I still had a small water leak and enough water got into the clutch to cause it to slip and wear prematurely, it was brand new. Now I have to install another one.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
January 15, 2018
Will this part fit my washer and do i need a special tool to install ?
For model number LSL9244EQO
Hello Deborah, Thank you for your inquiry. We do show that this part will fit the model number you provided. According to the repair videos we have for similar parts-the centerpost gasket and tub bearing, you should not need any special tools. I have included the links to the videos. Hope this helps!
https://www.youtube.com/watch?v=mVcPR10VLcc
https://www.youtube.com/watch?v=HFXdFMaY_B4
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 4, 2019
My washer is very noisy during the final spin. What repair do I need?
For model number 11025862400
Hello Joan, Thank you for the question. Noise during the spin cycle can be caused by a defective Gearcase PartSelect Number PS341974 or the Direct Drive Basket Drive Kit with Clutch PartSelect Number PS11723156, but should check for wear on the Centerpost Bearing and Seal Assembly, Centerpost Gasket PartSelect Number PS11723081 and Spin Pinion Seal PartSelect Number PS11741857 as well. Hope this helps!
Do you have a video of replacing the tub bearing in a Kenmore top loader?
For model number 11020712990
Hi Rick,
Thank you for your question. There is a video on our website that you can reference on how to install the tub bearing. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS271510. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roosevelt
January 7, 2018
Will this kit stop water from going into the gearcase.
For model number KAWS777EZ0
Hi Roosevelt, Thank you for the question. Yes the Centerpost Bearing and Seal Assembly should prevent water from leaking into the Gearcase. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
September 29, 2017
Will this kit work on this washer?
For model number MVWX500XW2
Hello Charles,
Thank you for contacting us.
This kit is not listed under your model. The bearing and seal for your model are part numbers PS6012095 and PS3407958 respectively.
I hope this helps.
My washer makes loud banging noise when it’s stopping the spin cycle. Everything else works as it should. What needs to be fixed?
For model number 11024872300
Hello Linda, Thank you for contacting us. I suggest inspecting the following parts: PS1485646 Direct Drive Motor Coupling, PS388034 Agitator Directional Cogs, PS334641 Clutch Assembly, and PS11741977 Drive Block - 2 5/16" High. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carlo
October 14, 2019
I am looking for my Amana front load washer tub bearing replacement kit, thanks in advance
For model number NFW7200TW
Hello Carlo, Thank you for the question. The Bearing is only sold as part of the back tub assembly PartSelect Number PS11741581. Hope this helps!
My washer is making a high pitched squeal during the rinse when the tub is spinning. Once you open the lid it goes away immediately but the drum continues to spin noise free for a few seconds. My best guess is to replace the tub bearings would this be a good place to start and would this be the correct part?
For model number 11091250100
Hi Josh, Thank you for the question. Sounds like the noise can be coming from the Drain Pump, PartSelect Number PS11741239. I suggest removing the pump and cleaning it out to see if maybe something has become lodged or damaged and causing the noise. Hope this helps!
Was this helpful?
Thank you for voting!
Michael
July 30, 2018
Will this fit my model and do i need a special tool to replace it?
For model number 92573210
Hi Michael,
Thank you for your question. Yes, this part is listed under your model number and it will work on your appliance. There is a video on our website that you can reference on how to install the tub bearing. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS271510. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kate
September 13, 2019
Will this kit work with my washer? It is making a very loud noise (freight train) during entire spin cycle.
For model number WTW4816FW
Hello Kate,
Thank you for your question. The correct kit you need is the agitator cam kit for your model under part PS334648. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
