Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard K - November 6, 2022
Verified Purchase
Not exact match but close enough.
I had to snip the wires and add the provided spade type connectors. The wire was then too short to prevent rubbing against the dryer drum so I had to yank the wires until they were long enough. Did not fix my problem but could be a circuit board problem. Didn't diagnose it further because the dryer still works but does not shut off when door opened.
★★★★★
★★★★★
Janet S - February 21, 2018
Verified Purchase
quick delivery
parts came quickly. Thank you!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rich
February 19, 2019
When i push start button i get 2beeps but will not start
For model number MEDZ600tW2
Hello Rich, Thank you for contacting us. This is an indication that one of the thermal sensors has failed. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
March 26, 2020
Can the door actuator prevent the dryer from starting, but still have the drum light turn on, or does the actuator keep both from working when it fails? My drum light is still working.
For model number 11085866401 (Kenmore)
Hello Greg, thank you for your question. The switch prevents the unit from starting with the door open and the lights as well. We would recommend testing the high limit thermostat kit, thermal fuse, and the internal bias thermostat first as these are the most common cause of the unit not starting. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lebeth
April 8, 2019
My Whirlpool duet dryer suddenly stopped working yesterday. When I try to start a cycle I hear one audible click but the dryer doesn't start. I've checked the door which seems to be closing as usual, I have held the start button ten seconds to try to restart, I have tried all the setting options and still all I get is one single click and no dry clothes. I would love some advice on what might be the problem. Many thanks.
For model number GGW9200LW0
Hello Lebeth, thank you for contacting us. For this symptom you will want to replace either the Door Catch Kit part PS334230, the Disposable Thermal Fuse part PS11741444, or the Internal-Bias Thermostat part PS11746740. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
December 6, 2017
My dryer will not turn off if the door is closed.When the door is opened the drum stops and the light comes on, but when the door is closed the drum starts again and the timer goes again.The timer keeps going through cool down to the next section and never shuts off. It does not sound like a door switch would fix it, but I did not see that symptom anywhere.Thank you for your help! Gary
For model number 110.96589210
Hi Gary, Thank you for the question.I suggest testing or replacing the Push-To-Start Switch, PartSelect Number PS11741476 or the Timer, Part Number: PS11741499. You can use a multi meter to check the continuity for each switch to determine the defective part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stanley
January 14, 2018
Dryer drum turns but no heat. I received an error code 88 using the "more time" up down process. Indicates door switch but the switch does stop the drum from turning when open. I replaced the heating element last year.
For model number GEW9868KL2
Hi Stanley, Thank you for the question. I suggest testing the element with a multi meter. If the element is good you can test the Thermal Fuse, PartSelect Number PS11741460, The Thermal Cut-Off Kit. This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit, PartSelect Number PS334278 and the Internal-Bias Thermostat,PartSelect Number PS11746740. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
November 5, 2019
The dryer will not start. When we hit the start button the senor light comes on, but the dryer will not start. We have replaced the moisture sensor, thermal fuses, heating element, rollers and the drive belt. We even sent out the control board and had it tested. They found no issues. The only thing we have not replaced is the door latch and/or the sensor. Please provide the part numbers we need to replace these parts. Is there anything else we should consider replacing?
For model number WED8300SW
Hi Jeffrey,
Thank you for your question. The only sensor listed under your model number is the moisture sensor, part number PS11741408. The part number for the door switch and actuator is PS334284.
There are some other parts that you will need to check to see which one is causing the issue. You will also need to check the high limit thermostat, the drive motor, the idler pulley, the electronic control board, the terminal block, the terminal wires and the heating element. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephen
September 5, 2017
Does the door actuator switch also control cutoff when door is opened and/or internal light.
For model number LGQ8621PG1
Hi Stephen,
That is a good question. This part does recognize whether the door is open or closed. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Tim
January 16, 2020
There are no lights on control panel dryer will not start door switch does activate interior light
For model number 11082826102
Hello Tim, it may be that the Electronic Control Panel is defective. This piece would control the functions of the unit as well as the lights.
Was this helpful?
Thank you for voting!
Claude
November 5, 2018
Does this door switch and actuator kit ps334284 work for Kenmore model above?
For model number 11085862401
Hello Claude, thank you for your question. Yes, the part number ps334284 door switch and actuator kit is compatible with your specific model. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Monte
July 29, 2019
For a while my dryer would not stop when the door was opened. Had to manually turn the dryer off. The problem now is the dryer will not start even with the door closed. Any help would be greatly appreciated. Thanks!
For model number GEQ9800PW1
Hi Monte,
Thank you for your question. If your dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal fuse, the door switch, the door catch, the drive belt, the push-to-start switch and the idler pulley. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
