Timer with Cams 279737

Hi Sean, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

Hi Barry, Thank you for the question. The timer should run for 45 mins. Good luck with the repair!

Hi Bob, thank you for reaching out. Based on the description you have provided, it seems that there is an issue with the dryer timer, part number PS334266. It is used to control the unit's cycles by regulating the length of time that power is directed to each setting. You may need to replace it to fix the issue. We hope this solves your problem!

Hello Todd, thank you for contacting us. It is possible that the door switch could be faulty. This part can cause the dryer to not turn off. Part number PS11741701 If you find out it is not the door switch then I would try replacing the timer. Hope this helps!

Hi Manny, Thank you for your question. The only way that you would be able to change the time is by turning your knob into the cycle that you want your machine to go in. You cannot change the basic functions of the timer. If your timer is not working then you may have to replace it. Good luck with your repair.