Door Catch Kit 279570

Hi Joanne, it sounds like you need to replace the door switch, it is part number WP3406105. Best of luck with this repair!

Hello Eric, Thanks for your question. Number 020 is the yellow catch. Number 022 is the blue catch. Number 025 is the green catch. If the catch you are replacing has an 18 on it or if it is silver, use the 020 yellow catch. If nothing matches check if your dryer has one catch, and make sure it is not a 27" Wide Laundry Center or a Commercial Stacked Pair and if that is true, use the 020 yellow catch. If it is either of those types of machines, use the 025 green catch. If your dryer has two catches, use the 022 blue catch on the top and the 020 yellow catch on the bottom. I hope this helps.

Hi Jeanie, to make this installation you will only need one latch kit, and you can find it here 279570. Please let us know if you have any further questions!

Hi Erin, Thank you for your question. There are a couple of other parts that you would check to see if they are working correctly. The first part I would actually suggest testing is your start switch. You may also want to test your thermal fuse as well. You can test both parts with a multi meter to see what the continuity is on them. If both of those parts are fine you might go on to test your thermostats and your element as well. If those parts are fine then it may be your timer that is the issue. I hope that helps. Good luck with your repair.

Hello Gerald, Thanks for your question. The door catch kit would be the most likely solution for your problem based on your description. As for the bulb, we are only showing one bulb that is compatible with your machine based on the manufacturer's part list. I hope this helps.

Hi Laura, Thank you for the question. The catch can be swapped to the other side yes but it sounds like there could be an issue with the door switch,PartSelect Number PS3653055. If the switching the catch did not fix the issue I recommend replacing the switch. Hope this helps!

Hi Morgan, thank you for your question. These would be the instructions from the manufacturer: This kit contains (2) door strikes and various door catches. Some dryers may use more than (1) catch. Note numbers stamped on the catches and/or color of the spring steel, 20 (yellow), 22 (blue) or 25 (green). Match the number and/or color, of the catch being replaced with the catch supplied in the kit. If the catch you’re replacing has an 18 stamped on it or is silver in color, use the catch stamped with 20 (yellow) for replacement. The (2) door strikes contained in the kit are the same. Please replace the door strike(s) with the appropriate number of door catches being used for this repair. If you cannot match the number on the catches, match the catch(es) by the following: 1. If your dryer has one catch and is not a 27” Wide Laundry Center or Commercial Stacked Pair, use the catch stamped with 20 (yellow) for replacement. If it is a 27” Laundry Center or Commercial Stacked Pair, use the catch stamped with 25 (green) for replacement. 2. If your dryer has 2 catches, use the catch stamped with 22 (blue) on the top and the catch stamped 20 (yellow) on the bottom. I hope that helps. Good luck with your repair.

Hi Warren, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal fuse, the door catch and strike, the internal bias thermostat, the drive belt, the idler pulley and the drive motor. I hope this helps. Thank you and have a great day!

Hi Peggy, Thank you for your question. Here is a link that will help you find your model number: https://www.partselect.com/Model-Number-Locator+5+repair.htm . Good luck with your repair.

Hello Pius, if you are experiencing problems with your buzzer shutting off, that would be a motor switch issue. It sounds like the motor switch is sticking/stuck and the only way to correct that would be to replace the motor. You can find the motor for your model here 279827. I hope this helps!