Maytag/Maytag_Thumb/RSDYZ2AA.gif
See part 15 in the diagram
Replacing your Whirlpool Dryer Heating Element Connection Wire Kit play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Heating Element Connection Wire Kit

★★★★★
★★★★★
3 Reviews

Rated by 9 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 11060212990!
 Fits your 11060212990!
PartSelect Number PS334206
Manufacturer Part Number 279457
Manufactured by Whirlpool
You May Also Need?
Product Description

Heating Element Connection Wire Kit Specifications

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat or not enough heat | Takes too long to dry
This part works with the following products:
Dryer, Washer Dryer Combo, Range.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# 279457 replaces these:
AP3134638, 3140, 279457, 279457VP
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

16 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chad
February 9, 2018
Dryer getting to hot. Replaced thermal fuse and thermostat. Noticed that one of the wires that plug into the heating element is melted.
For model number WED9500TW2
Hello Chad, thank you for your question. If the wires that plug into the heating element have melted, I would definitely replace this wire kit. You may want to test the element as well, just in case the excessive heat damaged the element as well as the wire. I hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Brad
November 7, 2017
My dryer worked great before we moved then it seemed like it took too long to dry. I just thought it was the vent because it was three times as long and it was stopped up. I cleaned the vent the best I could and seemed like it was better. Well now it does not heat. I found the element burned in two. The limits on the top and bottom of the chute are closed. Should I replace those as well or are there other parts you recommend replacing with the element
For model number MED6400TQ0
Hi Brad, Thank you for the question. I suggest replacing the limits as well as the element. When the element burnt up it may have blew the limits. Good luck with the repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
James
December 24, 2017
I have heater element #279838 which replaced #8565582. #279838 has 2 connections while the original #8565582 has 3 connections. So how do I connect the new part?
For model number 110.66642500
Hello James. Thank you for the question. Here is a link to the video on how to install the element. Hope this helps! https://www.youtube.com/watch?v=GtSdiY8S-Q8

2 people found this helpful.

Was this helpful?
Thank you for voting!
Beth
August 7, 2018
I have a Whirlpool duet and the heating element wire has burned out 2x already. To give you a little background the machine occasionally makes a high pitched metal scratching sound. The last time it make this sound, the dryer no longer produced heat. It runs through the cycle and the lights work, but no heat. Before i pay for the repair, would you have any idea what is causing the wire to burn out?
For model number WED9400SU0
Hi Beth, Thank you for your question. The reason the wire burned is because of a loose connection between the wire element and the heating element connection. You will need to replace the heating element and the connection wire. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jane
December 30, 2019
My Kenmore dryer has stopped heating.
For model number 110.60022010
Hi Jane, Thank you for your question. If your dryer has stopped heating, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=11060022010&mfgModelNum=&fkMfgID=3&ModelMasterID=351757&PID=19. We hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
February 6, 2020
Is this wire the same as the one that goes from the heating element to the thermal cutoff?
For model number WED9400SU0
Hello Chris, Thank you for the question. This wire is just listed to connect the element. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Nell
November 7, 2018
What size spade connector is on part 279457? I ask bc i only need the connector not the wire. & dont want to remove it from wire to try to use where i need it. Ty
Hello Nell, thank you for your question. Unfortunately, we do not have the size of the spade connector. Its recommended to replace the wire and connector provided by the manufacturer for that unit. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Chad
February 10, 2018
My dryer is flashing the code F23 and the clothes are very hot. What does the code mean?
For model number WED9500TW2
Hello Chad, Thanks for your question. The F23 error code is due to an exhaust thermistor short. You will want to replace the internal-bias thermostat, part number PS11746740, to fix this issue. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Terry
August 7, 2018
The wire nut on the heating element connection wire kit, is it just plastic? Not a ceramic wire nut?
For model number REX5634KQ1
Hello Terry, thank you for your question. From the picture and description the wire nut is plastic not ceramic. This is what is recommended by the manufacturer directly. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jose
August 21, 2019
Location of heating element
For model number MEDX655DW0
Hello Jose, Thank you for the question. The element is at the back of the appliance behind the tub. Hope this helps!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Dryer Heating Element Connection Wire Kit

Replacing your Whirlpool Dryer Heating Element Connection Wire Kit play video
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 9 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
no heat
took a couple differant parts to fix the dryer. i ordered one part at a time. i was expecting to wait the 5 days for shipping but i got home from work the next day of odering parts and they were there waiting for me on my doorstep. all three times i ordered. this website is the best site to order parts. i wont go to another website or store if i need to order parts for appliances. u guys have my business for life. thumbs up.
Other Parts Used:
Dryer Cycling Thermostat Thermal Cut-Off Kit
  • Christopher from dublin, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
226 of 280 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not drying completely
I started by removing the Washer from the utility room. Then I disconnected the vent and the power supply. Put the dryer on its front, (you may want to lay a blanket down to protect the finish.) Then using a nutdriver I removed the nuts which hold the back in place. Removed and replaced the defective element. Replaced the back with the nuts. I then up-righted the dryer, moved it back into position, reconnected the vent and the power supply and tried it out. It worked!
Other Parts Used:
Heating Element - 240V 5400W
  • Ellis from Bloomingdale, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
57 of 670 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
turning but not heating up
removed the back panel. located the section for the heating element and unpluged the tow wiresand repalced the thermostat. it took only 15 to 20 minutes. and instead of buying one I saved a lot of money
Other Parts Used:
Heating Element - 240V 5400W
  • luis a from lutz, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
39 of 575 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer air would not heat
Boyfriend stated it was simple, he removed the back and replaced the part using a few everyday tools.
Other Parts Used:
Dryer High Limit Thermostat Thermal Cut-Off Kit
  • Jacqulyn from ANDERSON, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dryer stopped heating
The repair was really easy and I loved the DIY videos they were great, not many tools needed to do these repairs that was great. The only thing is this didn't solve my issue.
Other Parts Used:
Dryer Thermal Fuse
  • Jennifer from CLINTON, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes not drying, and dryer didn't get warm.
Good
Other Parts Used:
Heating Element - 240V 5400W
  • Steven from WINSTON SALEM, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating Element went bad, melting a wire
*as with all electrical repairs I unplugged dryer from the outlet*

I disconnected the wires to the heating element, removed the 2 nut screws holding the heating element in place and removed the defective heating element. It looked like the heating element had darkened on the lower end and the wire terminals definitely looked like they had built some resistance that lead to the connection wire melting.

I slid the new heating element in and replaced the 2 screws. I cut the melted portion of the connection wire about 1/2" beyond the melted area and stripped the wire jacket exposing clean wire. I took the connection kit & clean wire lead, divided the wires into 2 groups on each end and braided them together and twisted them to a hand tight grouping. I then took the lead cap and twisted into onto the braided wire connection until it was also hand tight and snug.

I then reconnected the heating element connection wire back to the terminal end of the heating element and made sure all connections were snug.

I plugged the dryer back in, reset the dryer by turning the dial to a timed setting then back to off. I set the heat to low turned the dial to a time dry and turned on the dryer to ensure the element heated up and that the wired connection was secure. After 20 - 30 seconds, the element maintained heat and no issues were found with the fixed wire.

I replaced the dryer back and all screws and reconnected the vent hose. Dryer has worked great for the last few weeks with no issues. I was really surprised it was that easy to fix.
Other Parts Used:
Heating Element - 240V 5400W
  • Ryan from INDIANAPOLIS, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer produced no heat. My lint trap was full of wet lint.
I saw some videos suggesting you remove the back panel.Then I saw a video where only the kick plate was removed and the element was removed that way.
I removed both the back panel and kick plate.At first I thought I was wasting my time however once I got started I was glad I removed both back and front.
There was a significant amount of lint in the bottom of the dryer which made it easier to remove.
It also made it easier to remove the heater element.
I hope this helps.
Other Parts Used:
Dryer Heating Element
  • William from LAUREL, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent heat issues
The replacement parts are truly easy to exchange. Everything is located behind the rear panel. A few fasteners needed to be undone. What's really important is another video that explained what should be "checked" when a dryer malfunctions. VERY IMPORTANT viewing. I spent an afternoon going over the front inside and rear of my dryer. I'll probably get another ten years from my dryer thanks to this site data and videos.
Other Parts Used:
Dryer High Limit Thermostat Heating Element - 240V 5400W
  • David from WEST WARWICK, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334206
Manufacturer Part Number: 279457
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10688419100
Dryer
Kenmore
10688419300
Dryer
Roper
1093B1A
Wall Oven - Range (gas)*
Kenmore
110088732791
Washer Dryer Combo
Kenmore
1101820299
Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service