Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOHN
November 6, 2018
The wire broke at the terminal box. All i need is a new spade clip or end. Do i have to buy the whole wiring kit just to get one wire end?
For model number LE6150XSW0
Hello Jon, Thank you for the question. The spades are only sold as part of the wiring kit sorry. Thank you for your inquiry, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Shatarra
November 26, 2017
Does this kit come with the terminal block?
For model number NED4655EW1
Hi Shatarra,
Thank you for your question. It does not. The terminal block is a separate part. I have linked it below for you. Good luck with your repair.
My wiring kit has 4 wires. A black, white and red go to to terminal block. There is a separate white wire on mine that is fastened to a Green screw. I noticed this kit has a white and Green wire so i’m confused how to hook up. Can you explain this?
For model number WED4800XQ0
Hello and thank you for writing.
The black, white, and red go on the terminal block the green /white one is the ground which will go to the green screw. We hope this helps. Please contact us anytime if you require further assistance.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Judith
November 4, 2019
My son-in-law calls it a wire harness and says it looks fried. Are these the ones that would go in there? I also want to know what could have caused this and did it fry the protect motor? We tested the fuses, the switches and the thermostat and the continuity is still there. The unit will not start, any other suggestions?
For model number WED4900XW0
Hi Judith,
Thank you for your question. This would not be the correct wire harness. The part number listed under your model number for the wire harness is PS1490143. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marcy
December 20, 2017
What heating element do i need for this model Kenmore dryer?
For model number 11068132410
Hi Marcy,
Thank you for your question. The part number for the heating element listed under you model number is PS11770230. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Maelyn
January 28, 2018
Is there an option to just buy the screws and nuts? I am missing one of the nuts so i cannot screw in one screw. Would rather not buy the whole terminal and wire kit just for one nut.
For model number MEDX600XW0
Hello Maelyn, thank you for your question. Unfortunately, the manufacturer only sells these parts as a kit. You would have to order the set of parts. I hope this helps!
Was this helpful?
Thank you for voting!
Dianna
December 14, 2019
It’s a thermal switch wires are hooked up wrong with the dryer still start but then shut off later
For model number Wed8500dc4
Hello Dianna and thanks for writing.
Yes, the wrong wiring could cause this. It also could be a faulty thermostat internal PS11746740 test the part after you check the wires and replace it if needed. We hope this helps. Please contact us anytime.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
