Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
February 18, 2020
Getting water on shelves, sometimes it freezes. Ice maker is not hooked to water. I tested the gasket to fridge seal with a piece of paper and it seemed a lot weaker than the fridge to freezer door seal. Will this stop the water collecting on the shelves or is there another problem. Freezer seems normal--no ice or frost on walls.
For model number 10674244400
Hello and thank you for writing.
It is quite possible that a damaged or faulty gasket lets air in the fridge which creates condensation, so it might be a great idea to replace this defective part. We hope this helps. Please contact us anytime if you require further assistance.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
November 13, 2017
Will a new seal stop the door from opening 2 inches on it own and some times feels like you have push it shut the last 2 inches will not order parts till I hear from you
For model number CT21GKXPQ01
Hi Ray, Thank you for the question. The gasket can be one of the issues but I also suggest checking the hinges and the washers to make sure they are intact and now wore down or bents. The door needs to sit level in order to close properly. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha
January 7, 2018
Can u put on a gasket when refrigerator is on?
For model number Ct21gkxrq02
Hi Marsha, Thank you for the question. It is always best to unplug the appliance while doing the repairs. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Khalid
February 27, 2018
Is this part down below diameter (29 inches x 37.5 inches)(74 centimeters x 95 centimeters) to be replaced Whirlpool refrigerator model gr2shkxmq01. PartSelect number ps323895
For model number GR2SHKXMQ01
Hi Khalid, Thank you for the question. The White Door Gasket for the model number provided is Part Number: PS323895. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rosemary
March 22, 2022
I am looking for a door gasket for this model. Do you have this part and does it come with upper and lower door gasket?
Thank you, Rosemary.
For model number WRT1L1TZY01
Hi Rosemary,
Thank you for your question. The freezer and fresh food door gaskets are sold separately. The part number listed under your model number for the beige fresh food door gasket is PS323895. The part number listed for the black fresh food door gasket is PS326951. The part number listed for the beige freezer door gasket is PS323894. The part number listed for the black freezer door gasket is PS326950. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Frost-free freezer was frosting up
First I cut the gasket-fip with the wire cutters. Then I removed the gasket by pulling it away from the center if the door (not perpendicular to the door). I placed the new gasket over the door, secured the corners first, then pressed the rest of the gasket into place.
The repair to the refrigerator door (lower compartment) stopped the freezer from frosting (upper compartment), and it also reduced the time the compressor runs. However, I have the freezer turned to the lowest possible setting, and it still seems to be quite cold. There may be another issue w/ the unit such as the thermostat.
Victor from Worcester, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
27 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Condensation in fresh food area
I just removed the old seal cleaned the area and simply installed the new seal. The instructions were easy to follow and project was completed in less than 1 hour.
Larry from Goffstown, NH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Freezer Door and Refrigerator Door Gaskets
!st removed the doors from the unit, then laid them on the floor. Next, on a long side of the door, cut through the gasket so I could pull it off the door in one piece without separating the door liner from the outer door. Then, starting at a corner, started pushing the stiff black part of the replacement gasket between the liner and outer door, making sure to push it completely under as I went. Used a thick flat bladed screwdriver to carefully help push the final corner section in. Repeated on both doors, rehung, plugged in and done!
took door of the refergarator. Then cut old gusket of and clipped the new one on and then put the back. Done!!!!!
George from Albakurky, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
7 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After 17 years, the old door gasket was split and showing signs of mold
The gasket has an inner lip that fits over the edge of the door plastic liner. The old gasket was removed by pulling it straight out, in the plane of the door. Try not to pull sideways as it could crack the door liner, which gets brittle with age. The new liner had a brown magnetic strip, which holds the door closed, and this fits behind the edge of the door liner. Start on the bottom of the door. A helper is useful to hold the gasket loosely vertical. A flat blade screwdriver can be used to pry away the liner to insert the new seal. Once you have worked in the lower edge, install both sides, and then the top. Some juggling side-to-side may be needed for an exact fit
duncan from HOWELL, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gasket was cut and ripped
rippped the old one off and carfully put the new one on with a flat head screwdriver at an angle as not to rip the new one
Herbert from NIAGARA FALLS, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rerigerator was leaving a lot of condensation on top shelf in refrigerator.
Removal of the door gasket went quite fast. First i needed a 8mm wrench. That what I didn't have. Got the socket set, not the wrench. Tried adjustable wrench, went slow. I slowly got the bolts out. Putting the gasket on was slow. Then I get to the last corner, was awful for me. I finally get it on. Putting the freezer door back on 1st went crazy. I finally looked on top of refrigerator, saw (3) bolts, removed them, installment went easy from there.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Leonido B - December 16, 2022
Verified Purchase
Perfect Refrigerator Door Gasket
Perfect size refrigerator door gasket. I was not crumpled because it was sent on a rectangular box that fit the product they sent me. I followed the video instructions provided from PartSelect website. I gathered all instrument needed to install by myself. I did not have to soak it in a warm water as shown in other you tube videos. Thank you very much the available parts you sell.
★★★★★
★★★★★
Jacquelynn P - June 25, 2020
Verified Purchase
Perfect.
Order process was customer friendly, and delivery was quick. Great service.
★★★★★
★★★★★
Brian S - June 18, 2020
Verified Purchase
Got the part quicker then expected and easy to install
The part I needed, a refrigerator door seal, was actually discontinued but we have another refrigerator, different brand even, that matched the dimensions, so I took a chance and it fit perfectly.
★★★★★
★★★★★
Maurice C - May 21, 2020
Verified Purchase
This was so easy
I got the part very fast, I later it out over night when I prepared the door for installation it went so easy 20mins. Tops great video
★★★★★
★★★★★
Rolando S - November 18, 2018
Verified Purchase
great part
repair took longer than video implied
had to remove fridge door to get gasket to fit
★★★★★
★★★★★
Ralph M - October 3, 2018
Verified Purchase
Arrived late and was damaged
It took almost two weeks to be delivered and the cardboard shipping box was damaged along with the part. I installed it anyway, but two of the corners were damaged and didn't fit well and I don't think I'm getting a good seal all the way around the door. This part cost $120.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
