
Evaporator Fan Blade Kit
$
25.70
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS304684
Manufacturer Part Number WR60X114
Manufactured by
GE

Check if this fits your product and find model diagrams
Need help finding your model number?
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm
This part works with the following products:
Refrigerator, Range, Wall Oven, Range Hood.
This part works with the following products:
General Electric, Hotpoint, Kenmore, RCA.
Part# WR60X114 replaces these:
AP2071753, 2611, SWR02X3198, SWR2X3198, SWR60X0114, SWR60X114, WR02X3198, WR2X3198, WR60X0055, WR60X0080, WR60X0107, WR60X0113, WR60X0114, WR60X0247, WR60X107, WR60X113, WR60X114R, WR60X247, WR60X5003, WR60X55
...
Show more
, WR60X80
Show less
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
VL
August 30, 2017
How do I disconnect the electric inside the freezer to change the fan?
For model number TBT18NABNRAA

Hi VL,
Thank you for your inquiry. You should be able to just unplug the connections from the fan to the wire harness. I hope this helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Uy-Loi Ly
March 31, 2018
Water accumulates inside to bottom of refrigerator drawer.
For model number TBX18DAXPRWW

Hello Uy-Loi, Thank you for your inquiry. Check with checking the drain funnel, drain hose and grommet at the back of the fridge to see if they are cracked, frozen or clogged. Check the door gaskets for any leaks. You can also test the water inlet valve, your ice maker (if your fridge has one), and your water lines. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
December 13, 2022
MY COMPRESSOR DOESN'T TURN ON TOLD TO CHECK HERE WITH FAN. IS THERE OTHER TROUBLE SHOOTINT PROCESS FOR THIS PROBLEM
For model number CTX25DKE

Hi Patrick, thank you for your inquiry. We recommend checking the overload or relay-start capacitor, thermostat, and control board of your refrigerator. If you have further questions, please don't hesitate to reach out. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisey fan/motor (bad motor bearing ?)
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.
Other Parts Used:
-
Keith from Fort Worth, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
37 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No air flow to bottom box, no fan operation
All repairs made in freezer compartment.
MAKE SURE YOU UNPLUG THE REFRIGERATOR BEFORE WORKING ON EQUIPMENT
Removed ice tray.
Removed bottom cover, 2 screws.
Removed center cover, 2 screws.
Removed backside cover, 4 screws.
Removed fan assembly from back wall, 2 screws.
Disconnected wires from defective motor, old fan blade was cracked spinning freely on shaft.
Reversed the order for re-assembly.
Plugged in refrigerator, now working great.
Make sure you buy the rubber grommets that supports the motor, I did not and did not notice the old ones were worn out. A vibration is coming from the new motor after repair because I used the old grommets. These should be included with the new motor.
MAKE SURE YOU UNPLUG THE REFRIGERATOR BEFORE WORKING ON EQUIPMENT
Removed ice tray.
Removed bottom cover, 2 screws.
Removed center cover, 2 screws.
Removed backside cover, 4 screws.
Removed fan assembly from back wall, 2 screws.
Disconnected wires from defective motor, old fan blade was cracked spinning freely on shaft.
Reversed the order for re-assembly.
Plugged in refrigerator, now working great.
Make sure you buy the rubber grommets that supports the motor, I did not and did not notice the old ones were worn out. A vibration is coming from the new motor after repair because I used the old grommets. These should be included with the new motor.
Other Parts Used:
-
danny from tacoma, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken fan blade in the freezer compartment
Unplugged frige, removed top shelf, pulled broken fan blade off. Replaced with fan blade just purchased from PartSelect. Very simple repair. Orderd and recieved the right part.
-
John from Cumberland, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
a fan blade broken causing it to make a loud noise
we took off the old one and replaced it.
-
Marnie from Denver, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan blade broken
Removed the broken fan blade (just pulled off) and replaced with part purchased PartSelect. Very easy repair, no tools required.
-
John from Cumberland, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
family member melted fan with hair dryer
Unplugged fridge.Removed 2 screws holding a panel. After panel removed took off old fan and inserted new. Quite simple.
-
Lauraine from Rocky Hill, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Del Mckinley 2 - November 6, 2022
Verified Purchase
It worked great
The fan was just what we needed, fit perfectly and works great.
Louis A - April 30, 2022
Verified Purchase
Easy repair
It took me longer to unload the fridge than the repair took
Gerald C - January 22, 2019
Verified Purchase
No brainer
Installed in less than 5 min. , back in business
Daniel Z - October 17, 2018
Verified Purchase
Very easy replacement
It is the perfect replacement for my GE refrigerator.
Michael K - February 21, 2018
Verified Purchase
Broken Part
This part was broken when I received it. Will not order from this company again.
- < Prev
- 1
- Next >
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS304684
Manufacturer Part Number: WR60X114
Manufacturer Part Number: WR60X114
Brand
Model Number
Description
