See part 291 in the diagram
( Grid squares measure 1x1 inch )
Auger and Ice Bucket Assembly
$
179.12
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS294039
Manufacturer Part Number WR17X4312
Manufactured by
GE
Product Description
Auger and Ice Bucket Assembly Specifications
This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator, Range.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WR17X4312 replaces these:
AP2066344, 295409, WR17X4312, 66030, WR17X2055, WR17X2898, WR17X3731
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joel
January 24, 2019
Ice bucket with auger became over frozen, and when auger turned, snapped the back cover/nut that stabilized auger being off kilter, began leaking thru opening even though cover is intact. looks like the back wall of the bucket and rear auger cover/nut needs replaced. please advise.
thank you,
For model number TFX25CRBG
Hello Joel, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS294039. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
June 19, 2019
What is the part number for the auger which is part of this part. I do not need the bucket, only the screw auger, as it has rusted.Thx
james
For model number TFH24PR
Hi James, thank you for your question. Unfortunately it does not look like the manufacturer offers that part separately any longer according to your model information. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your General Electric Refrigerator Auger and Ice Bucket Assembly
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 26 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The oiginal Ice Bucket auger became rusty and discoloered the ice.
I went on line to find the part. Luckily I found PartSelect.com. All I had to do was enter the model number into the search box and scroll through the list of parts.
I ordered the part over the weekend and recieved it on Tuesday!
All I had to do was remove 4 screws from the original Ice Bucket and attach the new one.
Perfect fit in under 15 minutes!
Awesome place to do business with! I hope I never have to do another repair, but if I do I will go to PartSelect first!
I ordered the part over the weekend and recieved it on Tuesday!
All I had to do was remove 4 screws from the original Ice Bucket and attach the new one.
Perfect fit in under 15 minutes!
Awesome place to do business with! I hope I never have to do another repair, but if I do I will go to PartSelect first!
-
Michael from Antioch, CA -
Difficulty Level:Really Easy -
Total Repair Time:Less than 15 mins -
Tools:Screw drivers -
Parts Used:WR17X4312
65 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dirty ice from rusty auger
Removed old bucket/auger assy from frig. Removed 4 + screws from front cover. Put front cover on new bucket/auger assy. Reinstalled in frig.....done. now have clean ice.
-
William from Chesapeake, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
19 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing filter and auger/ice bucket assembly
After I realized that I needed to take the front and door off the old ice bucket (which involved removing 4 screws) and mount it on the new part (putting in those 4 screws), the job was easy. Installing the new assembly requires shoving it into place without really being able to see how or where it attaches, so I wasn't sure it worked until it produced ice a few hours later, and it did.
The filter on the fridge was more than 10 years old, but the new GE Smart filter and its adapters screwed and snapped into place easily. Subsequent filter changes will be simple - just a snap!
The filter on the fridge was more than 10 years old, but the new GE Smart filter and its adapters screwed and snapped into place easily. Subsequent filter changes will be simple - just a snap!
-
Jane from San Dieg0, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
14 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Bucket Shelf Broke at screw hole also at back . Metal attachment at back broke free from fan cover.
GE in my opinion made a poor design the ice shelf bracket attached to the metal fan cover after metal tab was bent down that is also where it broke it was riveted to this but the metal broke free
So i purchased a piece of aluminium flat strap cut this about 1" long then riveted this to the shelf bracket and pushed this through the metal fan cover and let rest there and put screw in at other end. Also purchased alum angle also to remake ice shelf when complete then i will use it as ice bucket shelf instead of plastic one.
So i purchased a piece of aluminium flat strap cut this about 1" long then riveted this to the shelf bracket and pushed this through the metal fan cover and let rest there and put screw in at other end. Also purchased alum angle also to remake ice shelf when complete then i will use it as ice bucket shelf instead of plastic one.
-
Roger from Norman, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Quit dispensing and crushing ice.
Ordered new auger and ice bucket assembly. Removed old door and with four screws I attached it to the new unit. Works very well!
-
Charles from Odessa, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
9 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator ice bucket was rusty
My husband just pulled out the defective ice bucket and replaced the new one.
-
Eleda from Humble, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would not dispense ice cubes
Removed the face plate (4 screws) on the ice bucket/auger and put it on the new unit.
-
Barbara from Medical Lake, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a smell from the ice and bad taste
I removed the 4 screws from the cover and replaced the auger and ice bucket assembly. Extremely simple and I was amazed how easy it was.
-
Henry from Rockville, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice bucket was broken
it was really easy now it works like it did when it was brand new
-
ROY L from TIGRETT, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
Parts Used:WR17X4312
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted Auger and Broken Ice Bin Door
After bagging the ice in the old bin and rinsing out the new bin, I removed 4 screws that held the old ice bin facing/door frame to the old ice bin and the facing came right off. Then I just screwed the facing on the new ice bin, popped the new door into place, and put the new ice bin back into the freezer. Although web descriptions for the parts I ordered referenced GE and other appliance brands and not Kenmore at all, the search engine led me to these parts and everything fit perfectly.
-
JOHN from CONROE, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Carol H - October 25, 2020
Easy Repair
Received the next day after ordering.
James C - October 7, 2020
quick and easy
This part solved my problem of poor dispensing and dirty ice. Once the ice had gotten stocked it worked as well as it did when we bought the refrigerator.
Rose Marie M - September 28, 2020
Perfect replacement!
My Mother's refrigerator, which she refuses to part with, desperately was in need of a new auger and ice bucket as the original (Circa 1980) had become quite rusty. This replacement part was identical to the original, sans the rust and wear, and took 2 minutes to replace. Bravo!!
GORDON A - July 25, 2020
works as good as the original.
I ordered the complete auger assembly and ice bucket sans front fascia. The bucket plastic is thinner and lower grade then the original but the bucket does not show behind the fascia and it works perfectly fine. Changing fascia and installation takes less than 5 minutes
Hunter D - July 22, 2020
Perfect replacement
the exact part for a 23 year old refrigerator.
Steven L - June 27, 2020
OK
GOOD
Dan G - February 6, 2020
Perfect
The part was easy to install and fit perfectly
Rick P - January 9, 2020
No more rust
Part was exactly what I needed and was simple to install.
Charles A - October 2, 2019
It got here in a timely fashion, and worked as intended
The back of the old ice bucket and the collar were broken at the rear, so I could have ordered just these two parts to save half the cost. This would have required a less than simple disassembly and reassembly of the auger to install the new pieces. Buying the auger and ice bucket assembly made it a simple job. It only required the removal of three screws to remove and reinstall the existing front cover and door assembly to the new auger and ice bucket assembly. Whole job took about 10 minutes.
Shari E - August 15, 2019
worked perfect easy to install
part arrived in great condition, and when they said it would. Works perfectly, I'm Very happy
Model Cross Reference
This part works with the following models:
PartSelect Number: PS294039
Manufacturer Part Number: WR17X4312
Manufacturer Part Number: WR17X4312
Brand
Model Number
Description