Install videos!
291908-1-M-GE-WR17X10706 -Dispenser Door Recess Crank
Part Location Diagram of WR17X10706 GE Dispenser Door Recess Crank
See part 67 in the diagram
Replacing your General Electric Refrigerator Dispenser Door Recess Crank
( Grid squares measure 1x1 inch )
291908-1-S-GE-WR17X10706 -Dispenser Door Recess Crank 291908-2-S-GE-WR17X10706 -Dispenser Door Recess Crank Part Location Diagram of WR17X10706 GE Dispenser Door Recess Crank Replacing your General Electric Refrigerator Dispenser Door Recess Crank
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Dispenser Door Recess Crank WR17X10706

★★★★★
★★★★★
1 Review

Rated by 33 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 13.84
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS291908
Manufacturer Part Number WR17X10706
Manufactured by GE
Product Description

Dispenser Door Recess Crank Specifications

The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips screwdriver. If your dispenser door will not close properly, or ice is not dispensing properly, you may have a damaged door recess crank. This part is made of white plastic and is sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Dispenser Door Recess Crank

Replacing your General Electric Refrigerator Dispenser Door Recess Crank
Back to Top
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Ice maker won’t dispense ice | Door won’t open or close | Frost buildup
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR17X10706 replaces these:
AP3185409, 913457
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles H - May 29, 2019
  Verified Purchase
Fridge
Exactly what I needed...worked great and easily installed
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 33 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice got stuck at dispenser door
I started by finding thw dispenser door part. On the parts diagram it showed all the other parts I might need to replace. Due to the age of the fridge I decided to replace them all, especially the sprIngs. I made sure to watch all of the videos for each part. Although they overlapped, each one showed the repair in more detail. The repair was as shown. If your frosge has been in service like mine for many years, plan on taking thw whole ice chute and dispenser door assembly out for thorough cleaning. One trick I learned is to take pictures as I disassemble so I can refer back for reassembly. When I put it together, the microswitch didn't work. I ordered that part, the only one I missed initially and installed it when it came in. Everything worked well. There was no video for the torsion spring and alignment of the chute and frame is tricky, make sure you take a picture. Part Select should dona video foe that. The putty knife trick for the trim ring was key. It was only shown in one video for an internal part so glad I watched them all.
Read less
Other Parts Used:
Torsion-Fit Spring Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Door Recess Retainer Dispenser Door Recess Crank Recess Door Spring
  • Brian from ORLANDO, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost on the inside of the ice shoot, and the dispenser door recess crank was broken.
Used a putty knife to take the frame out .disconnected the power. Disconnected the panel. unscrewed the dispenser door recess crank (only 4 screws) . After that unscrewed the assembly of the flapper It was an easy process after that to install the new parts using a flat head and a
Phillips screw drivers.
Other Parts Used:
HOUSING SHIELD DISP KIT Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Raja from CLARKSBURG, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost in upper portion of freezer
Removed escutcheon, removed control panel, remover and replaced flapper, spring and crank. Followed the instruction exactly. Although I hope this fixes the frosting problem, I did not see anything wrong with the parts I removed. I hope this fixes the problem,
Other Parts Used:
Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Tim from SANTA FE, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice door not closing
looked at the video you supplied for repair.. that made it so easy to repair the problem. I felt quite confident in myself after the video.The repair went smoothly and the refridgerator wotks super thank you so much Rick
Other Parts Used:
Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Rick from VACAVILLE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
FROST IN FREEZER NO WATER
FOLLOW INSTRUCTIONS OF YOUR VIDEO
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Jim from SPANISH FORT, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker dispenser chute frosting up
Before starting my repairs I checked for part suppliers online. Partselect was one of the first I saw. They also had instruction videos. After watching the video, I took apart the ice maker and found the solenoid had rusted. I replaced the solenoid and while everything was apart I replaced the crank, spring and the flapper. The entire process only took about 20 minutes and that was only because of their informative videos.
Read less
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Bill from Venice, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Dispenser wouldn't work.
I watched the video and armed with that information and a few inexpensive parts replaced the defective solenoid, flapper and crank arm. I'm pretty handy and this was easy! I discovered quite a bit of mildew up and behind the panels and was able to clean those panels completely while they were removed. The screw heads were a little rusted so I made sure to use a new Phillips screw driver with the exact size tip and some moderate finesse to loosen or remove the screws. I will return to Parts Select in the future for any appliance repair parts. Thank you!
Read less
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Dispenser Door Recess Crank
  • Charles from Waterford, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice despenser door would stick open and frost up to the point of of ice not coming out
after finding the video describing the same problem, i gave it a shot. Major problem was figuring out how to take outside trim off of the ice/water dispenser. Everything i tried did not work like the videos i had seen. Looking thru some of the posted blogs i found another way to get behind the control panel without even taking off the trim piece. i pressed a 1/8th allen wrench into the two outer holes on the bottom of the control panel which released the panel to pull out from the bottom. after that it was simple to release the three plugs from the circuit board and remove the control panel. 4 phi lips screws later the ice chute comes straight out revealing the flapper door which is held in by 2 more screws. once that assembly is out the solenoid is held by three more screws. there was nothing difficult at all about this repair once the secret was out about the first step about the three holes (use only the outer two) in the bottom of the control panel
Read less
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Door Recess Retainer Dispenser Door Recess Crank Recess Door Spring
  • joe from raleigh, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
35 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Chute Flapper not closing causing water dripping to floor and ice chute freezing up solid
I followed the video instructions for replacing the Flapper Valve and solenoid that Part Select suggested. It was one of the best DIY Reapair Sites I've used. Thank you
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Ice Funnel Dispenser Door Recess Crank Recess Door Spring
  • James from Malabar, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
132 of 182 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
flapper movement both directions
Replacing was easy. Cleaning took the longest. Order screws with parts, I could not find them at the hardware store. I suggest a coat of oil (3 in one) on the solenoid/piston surfaces. I probably did not have to replace them. The rust was inhibiting the piston movement. Some steel wool and oil would have probably fixed it. If the flap closing starts sounding softer, I'm going to take it apart and clean it first.
Read less
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Recess Crank Recess Door Spring
  • James from Milford, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
October 30, 2019
Do the little screws come with the parts?
PartSelect logo
Hello Rick, Thank you for the question. This is just the crank as seen in the picture. Screws are not included. Good luck with the repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Recess Door Spring
$9.17
$9.17
  In Stock
Dispenser Door Assembly or Flapper
$15.58
$15.58
  In Stock
Dispenser Door Solenoid Assembly
$64.74
$64.74
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS291908
Manufacturer Part Number: WR17X10706
Brand
Model Number
Description
General Electric
A4425GDTABB
Refrigerator
General Electric
A4425GDTAWW
Refrigerator
General Electric
A4425GDTBBB
Refrigerator
General Electric
A4425GDTBWW
Refrigerator
General Electric
A4425GDTW
Refrigerator - GE Refrigerator Model A4425GDTW Parts
General Electric
BSS25GFPACC
Refrigerator
General Electric
BSS25GFPAWW
Refrigerator
General Electric
BSS25GFPCCC
Refrigerator
General Electric
BSS25GFPCWW
Refrigerator
General Electric
BSS25GFPDCC
Refrigerator
General Electric
BSS25GFPDWW
Refrigerator
General Electric
BSS25GFPECC
Refrigerator
General Electric
BSS25GFPEWW
Refrigerator
General Electric
BSS25GFPHCC
Refrigerator
General Electric
BSS25GFPHWW
Refrigerator
General Electric
BSS25JFRFWW
Refrigerator
General Electric
BSS25JFRJWW
Refrigerator
General Electric
BSS25JFTAWW
Refrigerator
General Electric
BSS25JFTBWW
Refrigerator - T Series
General Electric
BSS25JFTCWW
Refrigerator - T Series
General Electric
BSS25JFTDWW
Refrigerator
General Electric
BSS25JFTEWW
Refrigerator - T Series
General Electric
BSS25JFTGWW
Refrigerator
General Electric
BSS25JFTHWW
Refrigerator
General Electric
BSS25JFTIWW
Refrigerator
General Electric
BSS25JFTJWW
Refrigerator
General Electric
BSS25JFTNWW
Refrigerator
General Electric
BSS25JFTPWW
Refrigerator
General Electric
BSS25JSRFSS
Refrigerator
General Electric
BSS25JSRJSS
Refrigerator
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Dispenser Door Recess Crank
$ 13.84
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.