Guy from New Palestine, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
WR51X10101,
WR60X30922,
WR50X10068,
WR02X12149,
WR17X11792,
WR14X10049,
WR14X10048,
WR17X11227,
WR55X10025,
WR1X1936,
WR17X10780,
WR17X10765,
WR14X10050,
WR02X10610,
WR02X10591,
WH1X2722
I Placed A Heat Gun In The Freezer Section To Defrost The Coils And Did Not Return In Time. The Heat From The Heat Gun Rose Upward And Melted All Of The Soft Plastic Parts. The Good News Was That The 16 Parts Were Not Expensive But The One Main Part That Was Needed To Put It All Back Together Took 3
I replaced all of the plastic parts as well as the heat coil that is mounted at the bottom of the coils that keeps the coils from freezing up. If I had not melted the plastic parts the coil could have been replaced in 2 days, 1 day to receive the part and the next to do the work. This is the second time I have had to replace this heater.
50 of 98 people found this instruction helpful.