Part Location Diagram of WR02X10585 GE Recess Door Spring
See part 801 in the diagram
Replacing your General Electric Refrigerator Recess Door Spring
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Recess Door Spring WR02X10585

 Fits your GHDA980K10BB!
★★★★★
★★★★★
12 Reviews

Rated by 47 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.16
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GHDA980K10BB!
PartSelect Number PS285013
Manufacturer Part Number WR02X10585
Manufactured by GE for General Electric, Hotpoint, Kenmore
Product Description

Recess Door Spring Specifications

This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Recess Door Spring

Replacing your General Electric Refrigerator Recess Door Spring
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door Sweating | Ice maker won’t dispense ice | Door won’t open or close
This part works with the following products:
Refrigerator, Dishwasher.
Part# WR02X10585 replaces these:
AP3670155, 879075, WR2X10585
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
5.0
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 47 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Ice got stuck at dispenser door
I started by finding thw dispenser door part. On the parts diagram it showed all the other parts I might need to replace. Due to the age of the fridge I decided to replace them all, especially the sprIngs. I made sure to watch all of the videos for each part. Although they overlapped, each one showed the repair in more detail. The repair was as shown. If your frosge has been in service like mine for many years, plan on taking thw whole ice chute and dispenser door assembly out for thorough cleaning. One trick I learned is to take pictures as I disassemble so I can refer back for reassembly. When I put it together, the microswitch didn't work. I ordered that part, the only one I missed initially and installed it when it came in. Everything worked well. There was no video for the torsion spring and alignment of the chute and frame is tricky, make sure you take a picture. Part Select should dona video foe that. The putty knife trick for the trim ring was key. It was only shown in one video for an internal part so glad I watched them all.
Other Parts Used:
Torsion-Fit Spring Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Door Recess Retainer Dispenser Door Recess Crank Recess Door Spring
  • Brian from ORLANDO, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost on the inside of the ice shoot, and the dispenser door recess crank was broken.
Used a putty knife to take the frame out .disconnected the power. Disconnected the panel. unscrewed the dispenser door recess crank (only 4 screws) . After that unscrewed the assembly of the flapper It was an easy process after that to install the new parts using a flat head and a
Phillips screw drivers.
Other Parts Used:
HOUSING SHIELD DISP KIT Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Raja from CLARKSBURG, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It makes a beeping sound in the middle of the dishwashing.
Remove the screws from the door and replace the switch interlock and door latch.

The problem is fixed and the dishwasher works fine so far (about three weeks) now.

The source of the problem looks more like the door latch because I use to push the door in to get it going before I replace the parts.

The video I received via email that show the how to do it was very helpful.

————-
Update after more than month. (12/30/2020)
The problem still persists. However I have a possible solution for it that doesn’t require any parts at all. The entire dishwasher is tilted backward. As the washing started and the water pileup in the bottoms of the dishwasher, it pull the entire dishwasher back work causing the switch interlock to release (open the relay causing the door open been sounds).

Level the dishwasher so that it doesn’t tilt backwards and this should fix the issue. I will post the latest after a month. If you need more info I can send a picture to describe the issue more clearly.
—————————
Update 01-06-2021
The problem still persists. The above theory I had was wrong and didn’t make any difference.

However, I have a permanent solution but it may not be ideal for most people ??. The relay that get close/open when the door is close/open is now always CLOSED. To start the dishwasher just press start and make sure you don’t open the door while the dishwasher is running. It will not stop. I am sorry and I know it’s not a good solution but it’s kind of funny.
Other Parts Used:
Door Latch Door Handle Actuator Interlock Plunger Switch Interlock Spring Plunger Retainer Handle - Black Recess Door Spring Latch Handle
  • ANTENEH B from EAST GRANBY, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwaher door not opening and Refrigerator air filter.
I followed instructions from the video link that was provided with the parts order confirmation.This repair was not difficult .

The refrigerator air filter was very easy to replace. There was also a new indicator (to remind me when to replace the filter again) that came with the filter.
Other Parts Used:
Refrigerator Air Filter Door Handle Actuator Retainer Handle - Black Recess Door Spring
  • Rick from Wilmington, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost in upper portion of freezer
Removed escutcheon, removed control panel, remover and replaced flapper, spring and crank. Followed the instruction exactly. Although I hope this fixes the frosting problem, I did not see anything wrong with the parts I removed. I hope this fixes the problem,
Other Parts Used:
Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Tim from SANTA FE, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice door not closing
looked at the video you supplied for repair.. that made it so easy to repair the problem. I felt quite confident in myself after the video.The repair went smoothly and the refridgerator wotks super thank you so much Rick
Other Parts Used:
Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Rick from VACAVILLE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
FROST IN FREEZER NO WATER
FOLLOW INSTRUCTIONS OF YOUR VIDEO
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Dispenser Door Recess Crank Recess Door Spring
  • Jim from SPANISH FORT, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not open open
Followed video and that part to install spring and door handle actuator was easy buy demo on video guy had hand in way where the outside door handle was inserted. I know what slot it went in but did not show how to insert in dishwasher. finally figured it out. But then led lights stopped working correctly so I need to buy some more parts when I figured out what I need.
Other Parts Used:
Door Handle Actuator Recess Door Spring
  • Carol from Anaheim, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
frost build up
flapper then bought the spring
  • JOHNNY from FORT WORTH, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice was freezing in clumps in the shute(in door itself) and prohibiting the flapper from closing. Warm air enters from the kitchen through this opening and melts/freezes the cubes in shute into a clump.
1-Duct taped around the rectangular grid on the face of the door.2-Usinng a putty knife I removed the frame(just held with small plastic grommits3-The front panel with buttons for water/ice etc---push up and remove.4-Did not unplug the refrigerator until after this item was lifted up and I duct taped it to the refrigerator door to keep it out of the way.5-Once taped out of the way I unplugged from electrical.(***there was no need to unclip the small connectors to this panel----less likely to break the prongs if the above is followed)6-2-3 screws removed the solenoid which in my case was my problem(((Solenoid was completely destroyed by the amount of rust that it exhibited. ******If you have to replace flapper and or it and the spring-----this doesn't look very difficult either. Just keep the doors shut while electric out. I'm handy but not an expert on anything---doing it was easier than what I expected. Should take no more than 1-2 hours
Other Parts Used:
Dispenser Door Solenoid Assembly Dispenser Door Assembly or Flapper Recess Door Spring
  • Salvatore from Fort Myers, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
August 24, 2017
Ice tube door does not close completely. The humidity causes ice to build up. I am thinking it is only the (63) recess door spring. The system makes ice and dispenses cubes, crushed, and water fine. The refrigerator is 12 years old. If it makes better sense to replace other parts too, let me know.
For model number GSL25IFRBS
PartSelect logo
Hi Paul, Thank you for your question. If the other parts are fine, you would probably only need to replace that spring. Sometimes that part will just wear out over time. I hope this helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
January 28, 2020
I was replacing the flap on the freezer door side for the ice maker. The spring part #74 pop off and i'm not sure on how its installed. Can you show me or send me a video. Thanks
For model number GSS20GEWPWW
PartSelect logo
Hi Chris, thank you for your question. We have an installation video listed underneath this part. Here is the link: https://youtu.be/xIICeXtGPWs. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Andy
July 16, 2021
I'm planning on replacing the flapper, spring, and crank as the flapper no longer sits flush against the dispenser. However, the water dispenser will also occasionally not dispense, it sounds like there is air in the line. Any thoughts on what might cause this? (i've replaced the filter several times and still having the issue) thanks!
For model number gss25jfmcww
PartSelect logo
Hi Andy, Thank you for your question. If you have air trapped in the water line, you will need to flush the water system to remove it. Press and hold the water dispenser lever for a few minutes to completely flush the air out. If the water lines are not fitted correctly or if you have just recently replaced the water filter, air may become trapped in the water lines. When you install a new water filter, it is important to flush the water filter before using it. Consult your owner's manual for information on the correct procedure for your refrigerator. If air is not the issue and the dispenser continues to occasionally not dispense water, there are some parts that you will need to check to see which one is causing the issue. You will need to check dispenser door solenoid assembly, the water filter head, the electronic control board, the microswitch and the dispenser door assembly and flapper. We hope this helps! Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Matt
July 21, 2021
Ice chute flap isn’t sealing fully when it shuts causing frost build up in chute and on ice maker. How do I know if I need to replace the spring, the flap, the solenoid, or all of the above?
For model number GSS25JETCCC
PartSelect logo
Hello Matt, Thank you for the question. You will need to disassemble the Dispenser to look at the parts to check for ware or damage. If any of the parts are defective, it will show damage or wear. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dee
April 9, 2018
Hi, we ordered these two parts for our refrigerator ps3487864 and ps285013. The video shows removal of the front panel. We have a stainless steel refrigerator and the front can't be removed. Would you please send us a video to replace the paddle ice dispenser and the recess door spring on this newer model that we have? Thanks so much for all of your help and speedy answers. Dee
For model number DSHS6VGBBCSS
PartSelect logo
Hi Dee, Thank you for your question. There is a video on our website that you can reference on how to install the actuator. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1526381. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS285013
Manufacturer Part Number: WR02X10585
Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service