The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side bracket on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Refrigerator Lid Bumper
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lou K - April 22, 2021
Verified Purchase
Easy Fix!
Part arrived sooner than expected.
★★★★★
★★★★★
Robert B - June 3, 2019
Verified Purchase
Right parts
All parts were right and easy to install
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 14 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy freezer fan
Fast and easy-great video instructions for each part ordered. All parts perfect fit. My refrigerator is running like new again-good for another 10 years!
The fan motor on our 48" GE Monogram refrigerator was making a lot of noise
Emptying the refrigerator and freezer and sliding that beast out of the cabinet was half the battle. Once the unit was out, it was a bit difficult removing the top and back panel to gain access to the fan motor (all of that is on top on our fridge). Once I gained access, replacing the fan motor was relatively simple. Although the video
... Read more on Parts Select showed a model where the fan motor was located in the freezer compartment, the rest of the instructions in the video for changing out the fan motor and splicing the new motor wires to the existing wire harness (different connection) were very helpful. I was glad I purchased new rubber bumpers and grommets and a new compression ring to hold the fan in place. The old rubber grommets were pretty worn. I also took the opportunity to vacuum out all the dust that had accumulated over the years in areas that aren't accessible from the front. The next most difficult part of the repair was maneuvering the unit back into the cabinet. Probably would have been easier if I had a helper. The new fan has been running well and quietly since the repair. Thanks Parts Select!
I followed your video and completely dismantled the refrigerator evaporator motor, fan, brackets, and grommet, I completely cleaned the refrigerator including the cooling coils. I then ordered the evaporator motor ,fan, grommets, lid bumper, and brackets. The order would take a week to arrive. In the meantime I cleaned and reassembled al
... Read morel the old parts, waiting for the new ones to come. Guess what! The refrigerator was quiet as a mouse. I really did not need the new parts, but I kept them anyway just for good luck. Not bad for a refrigerator that's twenty four years old.
Read less
James from NEW YORK, NY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy Freezer Evaporator
Find a video on youtube. Remove 6 screws. Pull the Styrofoam part up before removing the panel. Unplug and Remove the fan assembly. You will need a NUT DRIVER to take the bracket off the backing plate. I ordered the red grommet and the red bumper. You need TWO of the red grommets if that is the problem. My freezer was about 8
... Read moreyears old, and the grommets were worn and compressed, the bumper was not. Replacing these parts DID NOT FIX the problem. I needed a new motor. I probably disassembled and reassembled this stuff about 7 times before I got all the parts and tools. Each time I had to unload the freezer.
The evap fan, based on research, appears to be built to only last a few years. Pay attention to your order of removal for all pieces and it will go back rather easily in reverse.Remove items from freezer. UNPLUG FREEZER. Pop out the shelf. Use screwdriver to remove plastic piece in back. Pop out styrofoam piece. Use screwdriver to re
... Read moremove back metal section of freezer. Use nutdriver to remove screws holding the fan to the back. Unplug the motor. Pop off the fan. Pay attention to location of all these pieces. Put them on the new motor. Reassemble in reverse. Piece of cake.
Firt Removed the Ice Maker Tray and the full ice maker assembly. Removed the plastic shroud that sits over the fan assembly. Since the original connector (or the plug)for the motor had also a temperature sensor attached to it and did not know how to remove and trabsfer to the new motor connector I spliced the new motor to the old connecto
... Read morer. It was fairly straight forward. Overall the job was not that difficult and since I was trying to be more meticulous it took a little longer. An average person can do it in around 30 to 45 minutes.
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Peter M. from Lincoln Park, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer and ice maker worked fine but bottom(cooler)did not cool innoff .Freezer compartment was also forming a lot of ice all over. l
Removed covers on the freezer compartment to gain access to the evaporator fan motor.The motor was turning but not fast innoff to move air true tthe evaporator coil.The evaporator fan it is the one that will cool the bottom and top of your refrigerator.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
February 21, 2018
Frig and freezer work good but occasionally at least a couple times a day there is a loud bang-explosion slamming type noise that happens and have checked the unit and all is clean and just can't figure out what is causing it as it all of a sudden started to happen and doesn't seem to be getting any better or worse. It is quite loud.
For model number PSS25NGMAWW
Hi Richard, Thank you for the question. I suggest checking the fan blades. Make sure they are clean and not bogged down. Make sure the fan is running normal and not slow. In most cases the bang is coming from the condenser fan motor, Part Number: PS1483567. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 23, 2018
On the condenser fan motor you suggested i look at and replace if needed i was wondering if this motor runs continuous and fast as will pull the reefer out again to check it out before ordering and any information you can give me in advance would be appreciated. Thank you part #ps1483567
For model number PSS25NGMAWW
Hello Richard, Thank you for your inquiry. The fan is designed to operate anytime the compressor is operating, and the compressor runs when the temperature sensor signals that the temperature inside the fridge rises above it's set point, so it will start the cycle to push the air through the fridge and cool it off, so if the condenser fan is running continuously, the fridge may be getting warmer more quickly than normal. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Annette
November 5, 2018
Does lid bumper need to touch the motor to be effective for noise reduction. Old bumper appears to be good but not touching motor
For model number HPS15BTHJRWW
Hi Annette, thank you for your question. We actually have an installation video that will show you how this part is supposed to be installed: https://youtu.be/liXOlbNWFYo . I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rene
August 21, 2019
Good morning, my GE refrigerator makes a noise in the freezer coming from the fan blade
Touching the metal cover in the back, if you pull that cover it will minimize or go away.Which part i need fan motor or ?
thank,
For model number Pshs6pgzbess
Hi Rene, hard to say, I imagine if the fan its self is touching the lid you may have to replace the fan blade PS1021949. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Bernetha
May 9, 2019
Where is the model or serial number is located in frige
Hello Bernetha, Thank you for the question. Here is a link to will help locate the model number sticker on the appliance. Hope this helps!
https://www.partselect.com/Model-Number-Locator+9+repair.htm
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
