Install videos!
284596-1-M-GE-WR02X10140 -Hinge Cam Riser
Part Location Diagram of WR02X10140 GE Hinge Cam Riser
See part 16 in the diagram
Replacing your General Electric Refrigerator Hinge Cam Riser
284596-1-S-GE-WR02X10140 -Hinge Cam Riser 360 view
( Grid squares measure 1x1 inch )
284596-1-S-GE-WR02X10140 -Hinge Cam Riser 284596-2-S-GE-WR02X10140 -Hinge Cam Riser 284596-1-S-GE-WR02X10140 -Hinge Cam Riser 360 view
Part Location Diagram of WR02X10140 GE Hinge Cam Riser Replacing your General Electric Refrigerator Hinge Cam Riser
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Hinge Cam Riser WR02X10140

 Fits your TFX25ZPBAAA!
★★★★★
★★★★★
6 Reviews

Rated by 26 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 11.58
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your TFX25ZPBAAA!
PartSelect Number PS284596
Manufacturer Part Number WR02X10140
Manufactured by GE for General Electric, Kenmore, Hotpoint
Product Description

Hinge Cam Riser Specifications

This part helps with the closing of the door and helps keep it in position.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Hinge Cam Riser

Replacing your General Electric Refrigerator Hinge Cam Riser
Back to Top
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Door Sweating
This part works with the following products:
Refrigerator.
Part# WR02X10140 replaces these:
AP2057539, 289905, WR02X8830, WR02X9421, WR2X10140, WR2X8830, WR2X9421
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.7
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael L - November 10, 2020
  Verified Purchase
Easy Refrigerator Door Repair
I was able to quickly determine the part I needed on the website. Ordering was easy and the part arrived in less than a week. Another thirty minutes and the refrigerator door closed by itself again.
★★★★★
★★★★★
Daniel A - April 22, 2019
  Verified Purchase
Door works wonderfully
Was having difficulty with refrigerator door not self closing. Realized that hinge cam risers were broken. Ordered parts and the doors work perfectly now.
★★★★★
★★★★★
Joseph M - April 3, 2019
  Verified Purchase
The right part, easy repair
the part arrived in great condition, back in service
★★★★★
★★★★★
Thomas D - January 9, 2019
  Verified Purchase
Easy repair.
The part was perfect and repair was an easy job. Just took too long for part to arrive.
★★★★★
★★★★★
JOHN J - September 13, 2018
  Verified Purchase
Hinge riser
Fast delivery ...Great price ... Wish it came with installation instructions.
★★★★★
★★★★★
Howard S - August 2, 2018
  Verified Purchase
Easy fix... Great service
The part was perfect, it arrived very quickly, and the customer service was wonderful. If you need parts for your appliances and they carry them... this is definitely the place you want to go for them.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 26 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacing the Hinge Cam Riser (GE Part # WR02X10140) - it was brooken
I have just followed the instructions on the youtube video: It is really easy. I did. Thank you
  • Itamar from SARASOTA, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge cam riser wore out and split into peices
I checked the exploded view of the door assembly and the box assembly and determined the parts needed to properly solve the problem. I guessed correctly that the lower cam on the hinge assembly should be replaced at the same time since they had to work together. It ended up I had just the right parts and all of the nut head fasteners were the same size so only one wrench was needed. The door did have to be removed by detaching the top hinge as well.
Read less
Other Parts Used:
Door Hinge Shim Bottom Hinge Assembly Hinge Cam Riser
  • Kenneth from Gold Canyon, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
out of line would not stay closed
replaced old broken part,very easy to repair
Other Parts Used:
Door Closing Cam Hinge Cam Riser
  • Ray from Wayne, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken cam riser on door. New draw rail.
The repair was simple. I removed the screws to the door hinge at the top of the refrigerator and lifted the door off. I removed the door support attached to the base of the refrigerator and replace it with the new support held on by two screws. I put the door back on, aligned it, and replaced the screws on top. Total time: 7 minutes. Works like a charm. To all at parts select, you have a great site with easy to identify parts diagrams. Replacing the side rail to the draw took 45 seconds with two simple screws.
Read less
Other Parts Used:
Drawer Slide Rail - Left Side Door Stop Door Hinge Shim Hinge Cam Riser
  • Douglas from Parsippany, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cam riser broke and needed replacing
Just remove all items in door shelves, remove screw holding top hinge cover on. Remove two bolts holding top hinge and remove hinge from door. Carefully open door and lift out of bottom hinge. Remove screw holding bottom hinge on door and replace broking cam riser. Reinstall door in reverse order and adjust top hinge where both doors are even across the top. Thats it!!!!!
Read less
  • wayne from burns, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't stay shut. Cam riser was broken.
Emptied contents from the door. Removed top hinge cover (one screw) and top hinge (two bolts.) Lifted door off and replaced broken cam riser on bottom hinge. Put door back on.
  • Eric from Surfside Beach, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge at base of doors cracked and broke causing door to slip down when opened
Note difference between Freezer and Fresh food door.
Also, did not need the Door Stop but should have ordered one water tube union (PS299116). See Freezer below

Fresh Food Door
1. Removed cap at top of fresh food door (Philips screw) and used socket wrench to remove two hex head screws from top of refrigerator.
2. This allowed door to be lifted off base.
3. Removed door stop, hinge shim and broken cam riser from door using socket set and nut driver. Two hex head screws.
4. Replaced all three parts with new parts, re-attached using existing Hex Screws. Make sure cam riser is aligned properly to allow door to fit back on hinge. If it's slightly off, the door will not settle on hinge properly.
5. Replaced door, make sure it aligns properly before tightening Hex Screws to top of Refrigerator. Replaced cap at top.

Same process for freezer door except:
a. At the top of the door, I had an electrical connection due to Ice/water dispenser in the door. This connection is fairly easy to disconnect.
b. There is a drain tube that runs inside the door and through the hinge assembly in the base of the door. The door can not be removed unless the tube is disconnected or cut. There was a Water Tube Union (PS299116) just beyond the bottom hinge which I was able to disassemble to free the tube. However, this took considerable force and luck and I would recommend you consider buying a new part in case it breaks or you need to cut the tube. Otherwise you will not be able to get the door off. Once the tube is disconnected, it easily slides through the hinge and the door can be removed.
Read less
Other Parts Used:
Door Stop Door Hinge Shim Hinge Cam Riser
  • James from Cromwell, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Produce side of the refridgerator was warm, freezer side cold.
removed the back of the freezer unit and replaced the defrost heater and thermastat. took the controls out of the produce side and replaced the defrost timer.
  • Mike from Lawrence, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge Cam Riser broke - door wouldn't self-close
I removed all of the items in the refrigerator door. I then removed the top hinge cover with a Philips screwdriver, and removed the two machine screws holding the top hinge using a socket wrench. This allowed me to lift the door off the bottom hinge pins and set the door on its side. I removed the two screws holding on the broken bottom hinge cam riser block and replace it with the new one. After tighening it back with a socket wrench, I tried to put the door back in place. I asked my wife to hold the door steady while I lay on the floor to guide the door downward over the bottom hinge pin. I then replaced the top hinge screws and checked the door. It still didn't close on its own! I realized I had to loosen the top hinge screws and adjust the door so that it stands more vertically (evening the gap with the freezer door). With this adjustment, the door closes fine.
Read less
  • Richard from Los Altos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both doors wouldn't self close, the freezer door would also stick in the open position.
Another post that said you don't need to buy the whole metal mounting bracket with these cam risers is right. Also, I found 3 different parts that seemed the same ranging from $1.27 up to the mid $20's. I bought 4 of the cheap ones and 2 of the washers. Worked perfectly! Also, the reason this happens is because no one lubricates the cams, like everything else. Add some grease when you put it back together.

I used a 5/16 nut driver to take off the top hinge bracket. Lift off the door after emptying it. Place the door on something so you can work on it. Unscrew the cam attached to the bottom of the door with your nut driver. Remove the bottom hinge bracket with the nut driver and drill out the rivet holding on the cam piece. Attach the new cam plastic piece and place the washer in the space under the plastic where the hinge post will go. Put grease on both cams! Place the door back on the hinge post. Reattach the top bracket. Adjust the top bracket by sliding the door around until it is straight. Then tighten the top screws.

$10 in parts to get a new working door. The seal even grabs better!
Read less
Other Parts Used:
Hinge Cam Riser Door Hinge Nylon Washer
  • Jeff from Elk, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Bottom Hinge Assembly
$47.29
  In Stock
Door Hinge Shim
$16.89
  No Longer Available
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS284596
Manufacturer Part Number: WR02X10140
Brand
Model Number
Description
Kenmore
36348042892
Refrigerator
Kenmore
36348042893
Refrigerator
Kenmore
36348042894
Refrigerator
Kenmore
36348042896
Refrigerator
Kenmore
36348042897
Refrigerator
Kenmore
36348047892
Refrigerator
Kenmore
36348047893
Refrigerator
Kenmore
36348047894
Refrigerator
Kenmore
36348047896
Refrigerator
Kenmore
36348047897
Refrigerator
Kenmore
36348252892
Refrigerator
Kenmore
36348252893
Refrigerator
Kenmore
36348252894
Refrigerator
Kenmore
36348252896
Refrigerator
Kenmore
36348252897
Refrigerator
Kenmore
36348257892
Refrigerator
Kenmore
36348257893
Refrigerator
Kenmore
36348257894
Refrigerator
Kenmore
36348257896
Refrigerator
Kenmore
36348257897
Refrigerator
Kenmore
36350221000
Refrigerator
Kenmore
36350222000
Refrigerator
Kenmore
36350227000
Refrigerator
Kenmore
36350232000
Refrigerator
Kenmore
36350237000
Refrigerator
Kenmore
36350242000
Refrigerator
Kenmore
36350247000
Refrigerator
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36357552790
Refrigerator
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Hinge Cam Riser
$ 11.58
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.