GE/GE_Thumb/00110774i03.gif
See part 323 in the diagram
Replacing your General Electric Washer Inner Tub Base Hub play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Inner Tub Base Hub

★★★★★
★★★★★
5 Reviews
$84.12   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS273296
Manufacturer Part Number WH45X10027
Manufactured by GE
Product Description

Inner Tub Base Hub Specifications

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Pumps but will not spin | Will not agitate | Shakes and moves | Noisy
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH45X10027 replaces these:
AP2047612, 771586, WH45X10111, WH45X10013
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Jeanine
    February 12, 2018
    Does not agitate (although it will start once in awhile for a short time) and now no longer spins either. Does drain and refills during rinse cycle. No noise. No shaking. No smell thank you.
    For model number WHDSR315D5WW
    Hi Jeanine, Thank you for your question. If your washer is not agitating, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator coupling kit, the agitator, the belt, the inner tub base hub, the tub dampening strap, the transmission and brake assembly, and the lid switch assembly. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    JACK
    July 30, 2018
    Will inner hub mount #wh45x10027 fit with out buying basket assy.?
    For model number GTWN2800D0WW
    Hello Jack, Thank you for the question. Checking the model number provided, the base and hub is only sold as part of the basket, Part Number: PS3652848. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Grisel
    January 28, 2018
    When your inner hub broken into pieces when you replace you would just have to replace inner hub and nut are there any other items that should be replaced when doing that. I bought a belt cause i smelled burning,before installing belt i noticed metal chunks in washer removed agitator and found broken hub. Just want to order all parts needed to fix but have to order tool cause i cant remove nut but want one stop shopping instead of bits at a time
    For model number WLSR2200J5WW
    Hello Grisel, Thank you for your inquiry. I would check the hub washer part# PS271511 and split ring part# PS1766022 as well. You may also need the screw part# PS268949. In case you need it, the hub nut wrench is part# PS311934. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Karl
    February 24, 2020
    Will this inner tub hub assy(ps273296/wh45x10027) fit Hotpoint model htwp1200d0ww?
    For model number PS273296
    Hello Karl, thank you for writing. That part does not show compatibility to Model# htwp1200d0ww. The one that is compatible for your model only comes as an assembly - Basket Assembly Part #: PS5135711.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Charles
    September 11, 2019
    Will the WH45X10027 work with my model, my screws came from the inside of the tub and screwed into the hub.
    For model number WJRR4170G2WW
    Hi Charles, Thank you for your question. No, this part is not listed under your model number. The inner tub base hub for your model is sold with the basket and hub assembly, part number PS961189. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    David
    November 6, 2019
    Will this model number wh45x10027 fit my model its a hub
    For model number WHDSR315D5WW
    Hi David, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your General Electric Washer Inner Tub Base Hub

      Replacing your General Electric Washer Inner Tub Base Hub play video
      Customer Repair Stories
       Average Repair Rating: 2.2 / 5.0, 22 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      The Hub Under the Spinner basket broken/ Deteriorated
      Removed front cover, Control panel, top Cover, slasher unit, all very smiple stuff. the hub was broken and the spinner basket came right out. One half Hub attached to Spinner, Other half attached to Hub drive shaft. removing the Hub nut was the hard part. tried impack & socket, No luck. in removal. Had to usr Hammer & Chisel and bust Old Alum. Nut off. Clean up and replace parts. OK. Had to remove water pump and clear debree that went in pump when spinner Hub broke off . the spinner also bursted a crack in the outer poly tube when it cam apart.. Sanded the dmage area and Patched with a good coat of JB Weld. machine is working Like new. The parts all worked Great. the break down Chart was a great Help to get the right parts needed. Thanks
      105 of 126 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      tub would not spin / motor was smoking
      the hardest part was getting the hub nut off. You have no room for a big wrench, I ended up chiseling it off.once I got it a part I saw the transmission was leaking oil, I checked every thing else, every thing seemed fine. I read on this web site that a common failure was the hub, mine was not in the best of shape so I replaced it while I was in there.replaced tub bearing,washer hub, hub nut , retaining clip for clutch,ring split, transmission and tub bearing 1/2 and $250.00 later the machine works like new.The diagrams that give you the part numbers were very helpful in the reassembly.
      55 of 87 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Hub under agitator disentegrated
      I used the other 4 posting as a guideline but found that what wasn't mentioned here was that the disassembly/re-assembly instructions are actually located inside the washing machine behind the control panel (wish I knew that before I started doing it on my own).

      After removing the control knobs (temperature, cycle, etc.), unscrew the four screws and lift the control panel off. Underneath the panel, there was a folded up wiring diagram that includes assembly instructions on the back.

      Like others here, everything went smooth until I tried to get the Hub Nut (PS271505) off. No matter how hard I tried turning or hitting it (or the wrenches), it wouldn't move at all. I followed the other people's advise here and ended up taking a hammer and small chisel to the side of the nut. It's an aluminum nut so it cracked pretty easily and was easy to remove after that. Take my advise and just break the nut off if you are having any sort of difficulties getting it to turn. It's worth the extra $11 to just buy a new one!
      • MARK from RAMSEY, NJ
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Screw drivers, Socket set, Wrench (Adjustable)
      • Parts Used:
        WH45X10027, WH2X1193
      27 of 30 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      hub corroded away and left spin basket sitting on bottom of tub.
      Biggest problem was getting old hub nut off. I had to remove it in pieces because it was corroded so bad.

      Once hub nut was off it was a breeze to replace the parts after cleaning off the threads and shaft.

      Reassembled in reverse order.. and ran.

      I have to give accolades to PartSelect.. their customer service is second to none. i ordered the parts just before the Christmas holiday and they shipped them to my door in under 24 hours at no extra charge to see that I got them on time...
      THANKS!.. It sure helped.

      Would I do business here again.. YEP!

      I will recommend you to others.

      Thanks.
      • Leda from Port Saint Lucie, FL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
      • Parts Used:
        WH45X10027, WH2X1193
      16 of 20 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Loud bang during spinning
      Remove aggitator, disconect 4 support straps, pry off clips/ latches on top of drum. Remove small bolt that holds on the small plastic unit unto trans.
      That will give you access to the large bolt that holds the hub in place. This nut is on tight use a pipe wrench and adjustable wrench and TURN CLOCKWISE TO REMOVE - lock for direction on nut.
      Remove the bin gently and turn over to remove the small bolts that hold the hub in place.
      Installation is reverse of removal.
      • Jim from Marion, MA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers, Wrench (Adjustable)
      • Parts Used:
        WH45X10027
      15 of 17 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Inner tub base hub disintegrated
      I had to take the washer outside since there was no room to work on it in the laundry room. The extra space allowed me to spread out the parts, use the garden hose to clean and have light enough to take digital pics of the wiring before I disconnected them to remove the upper panel.

      Removing the upper retaining ring for the tub was simple with only 4 screws. The agitator pulled right up and out. The nut cover/agitator anchor removed easily with one bolt.

      The tough part was the inner tub base hub nut that I could not get off. Another user had commented on how they had to chisel the nut off and that was the best advice. I used my air chisel on either side of the nut and it was pretty quick to get off - within 3 min. If I hadn't read that I wouldn't have ordered another nut to replace the one I chiseled off.

      The diagrams and repair stories really made the difference. Cleaning and reassembling was done within about an hour - cleaning the 11 years of soap scum at least an hour total before and after replacing the parts.
      • Doug from Kannapolis, NC
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Socket set
      • Parts Used:
        WH45X10027, WH2X1193
      13 of 14 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      the bottem of the tub
      at the bottom of the tub their is a mettal peace witch holds the tub to the transmision witch is made of zink(aka junk metal or zink+tin)witch broke stoping tub from sping the clotes dry so atfer odering the new part and nut..
      and finding out that it is a LEFTHAND nut made of alumanum
      taking a small drill bit 1/8" and drilling the nut to weakin it making it brake able then cleaning the treds up
      the new part fit right in the tufest part was hold the trans still to get the nut on tightenuf to hold the tub
      • michael from warwick, RI
      • Difficulty Level:
        Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Wrench (Adjustable), Wrench set
      • Parts Used:
        WH45X10027, WH2X1193
      11 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The zinc drive hub that connects the transmission to the tub had corroded away.
      It was almost a complete tear down. Most difficult part was discivering how to remove the front panel. Slip a putty knife between the top and front covers. push and depress the spring tab on each side. The left hand nut on the hub was difficult. I had to get a neighbor to hold a large pair of pliers while I put a pipe wrench on the nut and hit it with a 2 lb. hammer in order to break it loose. Puting it back together do not forget to reconnect the level sensing hose to the level selector, I did. Machine will not perform without it. You can do it! I did.
      • James from Lapeer, MI
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
      • Parts Used:
        WH45X10027
      9 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Huge Banging, Uneven Spin, Metal Fragments in Tub
      After reading all the repair info and reviewing the diagram for my wash machine on this website I was ready to tear into my washer. I removed the front panel and lid to access the tub, pulled out the plastic agitator and revealed the broken inner base hub. The base hub was cracked half way around causing the inner tub to drop down and drag on the outer tub, making the washer sound like it was coming through the wall on a spin cycle. I then unbolted the plastic cap and removed it revealing the hub nut. The most valuable piece of advice in the repair info was abouthe hub nut being a laft hand thread (clockwise to loosen)and that it was on really tight and hard to remove. I put a short 8" pipe wrench on it, because of the lack of clearance in the tub, and hit it with the handle of a all steel hammer to break it loose. Unbolted the balancing straps (4) on the plastic top rim cap that holds the tub in place, unsnapped and removed it, then carefully pulled out the tub. I also had to unscrew the the control panel to reveal and remove the 4 screws holding the fill tube brace so I could push it back to remove the tub. I then took the inner tub outside and took it apart, 3 parts. The top plastic rim, the tub, and the broken base hub that are held together with torx screws. Then it was cleanup time, very dirty on the inside, used a garden hose, scrub brush, sponge, and soap. Cleaned up the hub nut threads with a wire brush and then the outer tub withe a sponge and shop vac. When the base hub broke it caused the inner tub and outer tub to rub together making a groove and plastic shards on the bottom of the outer tub that I had to scrape and sand smooth. A shop vac an absolute necessity in getting all the grime and plastic crumbs out of the outer tub so they don't get in and clog the pump. I received the replacement parts in 2 days! Reassembled in reverse order and everything worked great! Not a bad project at all when you know what to expect, thanks to Part Select.com.
      • Daren from Bloomington, IN
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set
      • Parts Used:
        WH45X10027, WH2X1193
      8 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broken tub strap, hub, an cracked outter tub
      Repair went good, only wish i had bought a new tub seal, washer, an split ring....but i managed to save the original ones an it seems to be working like new again! thanks Partselect!!!!
      • Drew from Queen Creek, AZ
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
      • Parts Used:
        WH45X10027, WH2X1193, WH1X2727
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      5 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        5
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Related Parts
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS273296
          Manufacturer Part Number: WH45X10027
          Brand
          Model Number
          Description
          General Electric
          51451Y1WW
          Washer
          General Electric
          51451Y2WW
          Washer
          General Electric
          52120TAWB
          Washer
          General Electric
          56021A0WW
          Washer
          General Electric
          56031A0WW
          Washer
          General Electric
          56041A0WW
          Washer
          General Electric
          56051A0WW
          Washer
          General Electric
          56121T8WW
          Washer
          General Electric
          56121TAWW
          Washer
          General Electric
          56121TBWW
          Washer
          General Electric
          56220T8WW
          Washer
          General Electric
          56220TAWW
          Washer
          General Electric
          56220TBWW
          Washer
          General Electric
          56221B0WW
          Washer
          General Electric
          56221B1WW
          Washer
          General Electric
          56221B2WW
          Washer
          General Electric
          56221B3WW
          Washer
          General Electric
          56231B0WW
          Washer
          General Electric
          56231B1WW
          Washer
          General Electric
          56231B2WW
          Washer
          General Electric
          56231B3WW
          Washer
          General Electric
          56241B0WW
          Washer
          General Electric
          56241B1WW
          Washer
          General Electric
          56241B2WW
          Washer
          General Electric
          56241B3WW
          Washer
          General Electric
          56251B0WW
          Washer
          General Electric
          56251B1WW
          Washer
          General Electric
          56251B2WW
          Washer
          General Electric
          56411D0WW
          Washer
          General Electric
          56411D5WW
          Washer

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service