Part Location Diagram of WH1X2754 GE Timer Knob with Clip
See part 8 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Timer Knob with Clip WH1X2754

 Fits your WBXR2060V0WW!
★★★★★
★★★★★
25 Reviews

Rated by 25 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 19.82
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WBXR2060V0WW!
PartSelect Number PS271124
Manufacturer Part Number WH1X2754
Manufactured by GE for General Electric, Hotpoint
Product Description

Timer Knob with Clip Specifications

White in color.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
Part# WH1X2754 replaces these:
AP2044921, 2309, WH01X2710, WH01X2754, WH01X2770, WH1X2710, WH1X2770
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
25 Reviews
4.7
Filter By Rating:
  • 5 Stars
    21
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 25 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Broke theteeth off the stem of the dial so it wouldn't allow selection of start/ load size etc.
Part came in after a couple days and it was a simple push on to the stem and it was done! Not the most difficult fix. Getting the right part first time was the best part!
  • rob from SILVERTON, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control knob dial was broke
Used needle nose pliers to pull out clip on control knob. Removed control knob. Removed broken pieces of the dial the were still on the metal wand. Inserted new dial in the correct place. Put on new knob. Done!
Other Parts Used:
Control Knob Dial Timer Knob with Clip
  • Sarah from SPOTSYLVANIA, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cycle knob shaft was broken at the clip
Removed old clip and remnants of old shaft. The key is.to keep the clip in the new knob and push it over the cycle shaft.
  • robert from PRESCOTT, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dial broke off due to husband overloading the washer. Agitator came off it's spindle which caused the dial to snap
Took back panel off dial section and luckly slide dial mechanism back onto it's bracket and tightened it down. Closed panel section back up. Clipped new dial part on front panel and it worked!
  • Christine from SUNSET BEACH, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The inner ring behind the knob was cracked
I read all the other inputs before I started the job. It was a very simple repair.
Other Parts Used:
Timer Knob with Clip Timer Dial
  • Ronald from Bliss, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken timer knob on ge profile washer
could not have been easier. It took a pair of pliers and a few minutes time to remove the remaining portion of the old knob from the spindle. Then simply push the new knob into place.worked perfectly
  • matthew from medfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken timer knob
used pliers to pull broken portion of knob off timer shaft then pushed new timer knob with clip onto shaft.
  • George from Merrimack, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob actuator teeth broke (behind knob)
Replaced the knob. Identified the appropriate knob which was easy because of the drawings on your site (PS271124 Timer Knob with Clip). Ordered knob, arrived the next day. Slipped the knob on the washing maching controller. Perfect.....took 2-seconds.
  • Tom from Santa Ana, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob had broken
Slipped the new knob on and inserted the clip and we were ready to wash
  • WALTER from SUMMERTON, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob had broken
First off, the repair part arrived in only two days. The schematic was very detailed and accurate on your web site. Once the part arrived and removed from the bag, it was a snap to install with just a needle nosed pliers. Total time was less than 5 minutes. This was the first time I had used PartSelect and you can bet I'll be back. Thanks again. Gary K. in IN.
  • Gary from New Albany, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
October 11, 2017
How do i insert the clip?
For model number PS271124
PartSelect logo
Hi Robert, Thank you for your inquiry. Here is a repair story from one of our customers that you can reference, "Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily removed. Replaced with new knob, old knob gear was completely stripped . put the new clip on and presto, Like brand new. A normal service call would of ran me 45.00 just to tell me what was wrong with the machine." I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
October 11, 2017
I am having trouble replacing the new clip. What is the trick? Please explain! Thanks
For model number PS271124
PartSelect logo
Hi Robert, Thank you for your question. There are installation instructions listed on our website just under the information on the part that you may reference on how to install it. I hope you find them helpful.

1 person found this helpful.

Was this helpful?
Thank you for voting!
JAMES
July 8, 2019
Is the "clip" part referenced in "timer knob with clip" description the same part as ps270835 / wh1x2117?
For model number WJSR2080T5WW
PartSelect logo
Hello James, thank you for your question. Yes, the Timer Knob Clip part PS270835 is the Clip that comes with Timer Knob with Clip part PS271124 for your model. We hope this answers your question.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS271124
Manufacturer Part Number: WH1X2754
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
55325119
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
General Electric
56241B0WW
Washer
General Electric
56241B1WW
Washer
General Electric
56241B2WW
Washer
General Electric
56241B3WW
Washer
General Electric
56251B0WW
Washer
General Electric
56251B1WW
Washer
General Electric
56251B2WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service