The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash cycle, the washing machine tub could be off-balance, meaning one or more of these straps may be loose, or broken. Other symptoms include: the washer leaking, not agitating, or pumping but not spinning. These straps are sold individually. However, we recommend that you replace all 4 straps at the same time. It is also recommended that you check the tub for cracks where these straps mount.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Tub Dampening Strap
Troubleshooting
This part fixes the following symptoms:
Leaking | Shaking and Moving | Will not agitate | Burning smell
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeff B - September 19, 2024
Verified Purchase
PartSelect was a hugh help!
The tub dampening straps that I ordered from PartSelect were exactly what was needed to repair my washer machine. Two strap original straps were snapped in two. I replaced all 4 straps with the parts I ordered from PartSelect. The 4 straps I ordered were shipped on time and arrived in good shape. I was able to have the machine repaired in the same day the parts arrived. I was very pleased withe the service I received. JOB
★★★★★
★★★★★
Allet P - April 6, 2023
Verified Purchase
Part fit less quality than expected
Disappointed, part not as thick as original stock part but same as replacements used before that failed sooner than expected. Perhaps whirlpool has changed its part sourcing
★★★★★
★★★★★
Stephen P - March 29, 2023
Verified Purchase
Perfect
I ordered the tub dampening straps, had them in a few day. They were perfect. Installed them ahhh the pleasure of a quiet machine again
★★★★★
★★★★★
Deborah C - January 4, 2023
Verified Purchase
Perfect as usual
My washer was starting to make lots of noise in the spin cycle. Based on PartSelect symptom list, I decided to buy 4 new straps that hold the tub in place. Parts were perfect and eliminated the problem. I’m a 68 year old woman who does my own repairs and I always turn to PartSelect. The symptoms list and the tutorials have saved me so much money. I am very pleased with PartSelect and intend to keep doing my own repairs.
★★★★★
★★★★★
Angela M - April 6, 2021
Verified Purchase
Easy repair and great part!!!
The part was in excellent condition and shipped very quickly!! Now it's back working as if it were brand new. Thank You Part Select!!!
★★★★★
★★★★★
Darryl L - January 20, 2021
Verified Purchase
The part was exactly like the original. Fit perfectly.
After watching the short video I completed my repair with 3 tools and less than a half hour.
★★★★★
★★★★★
Duane P - July 7, 2020
Verified Purchase
Perfect
????
★★★★★
★★★★★
Wallace A - June 17, 2020
Verified Purchase
Parts fit perfectly
The parts came in fast and was a fast repair.
★★★★★
★★★★★
Cyril M - May 14, 2020
Verified Purchase
Easy repair, correct part and worked as expected.
I am impressed with the easy way to find the appliance, the possible cause and the correct part on your website. BIG bonus for me are the videos on how to do the repair. Short turnaround time in delivery. Cudos to you!
★★★★★
★★★★★
Sophia C - May 5, 2020
Verified Purchase
Easy repair
This was really easy to use and works great. Recommended
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 50 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Inner Tub Base Hub replacement
The tub base hub developed a large crack and spin started to make a large vibration. Agitator coupling was frozen, so I broke it by dremel, wedge (a minus driver) and a hammer. The hub nut was also frozen, so I cut two slits into the nut with dremel, then broke it into two with a wedge and a hammer. Once the hub nut was removed installing
... Read more new parts was straightforward. Half year ago I replaced the timer and capacitor of this washer and together with this repair the total repair cost has now run up to $300. I think I should have bought a new washer half year ago but now that the repair has been done, I hope it will keep working for at least another 5 years. Otherwise I can't justify the $300 cost.
replaced broken straps all 4. washer not working ]. replaced lid switch with wire harness.replaced bad old belt.working fine now. my wife is very happy. thanks for your videos and how to do the job right.
I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but
... Read more there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub shacking
Repair went well but there was clips to the door switch not in the video. Still was easy to work around and complete.
Tony from DOVER, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noise tub moving too much
pulled front panel off it snaps in but had to get off. then remove two bolts holding too down. moved top around to get to straps. front to easy 5/16 deep socket aND rather .the other end has 1/4 socket back hard to get too not bad. took 30 minutes. didn't fix problem. on bottom of motor looks like it had rubber bumpers but none there didn
... Read more't find any on parts list. went to parts house auto got two rubber freeze plugs installed them in hole on bottom of motor that stopped the noise and rube moves very little now. also install new belt . install it put it on motor then on part of pulley then roll pull while keeping belt on motor roll pulley around till belt on all the way then roll pull more pushing on belt on motor till belt fit in all groves then roll it couple more times it will line groves up on pull. install top back down then snap front panel it your done.
Read less
jimmy from GRENADA, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken straps
replaces as per video. Very helpful
Roger from ORO VALLEY, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The unit was moving all over the place
I watched the video from the web site and the one that came with my invoice. This made it very easy to fix.I got the tools that I needed and went to town on the repair.
Ronald from NIAGARA FALLS, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very Noisy In Spin
When disassembling I could not remove the 1 3/4" tub nut with in house tools and had to order the spanner wrench. Almost mandatory unless you have a socket wrench.
Would not completely drain all the water out of the tub after the final rinse cycle, with a burning smell from the belt because it could not turn properly.
I followed previous parts select customers advice exactly, of replacing the dampening straps, and it worked perfectly. Thanks-A-Million!
William from Cumberland, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Straps had stretched with age.
Removed the front panel. Removed the washer top. Removed and replaced each strap. Very simple repair.
Roger from Longmont, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
32 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nikita
July 20, 2017
I ordered the dampening straps for my washer tub. I ordered 4 of them and was just wondering if they had to be placed in a specific order or anything?
Hello Nikita, no, there is not a specific order for the placement of the dampening straps WH1X2727 for your washer. Best of luck with this repair.
43 people found this helpful.
Was this helpful?
Thank you for voting!
David
December 27, 2017
When on the spin cycle the washer makes a loud noise much louder than ever before. Is it the bearing or something else. I checked the rubber straps and the belt and all looks good..if it is the bearing can this be repaired at home?
For model number WHRE5260E1WW
Hi David, Thank you for the question. Yes, the tub bearing PartSelect Number PS271510 is the most common part to replacing when having a lot of noise during the spin cycle. Here is a link to the video on how to do the repair yourself. Hope this helps!
https://www.youtube.com/watch?v=cWe8YAMM_Ds
24 people found this helpful.
Was this helpful?
Thank you for voting!
Gina
July 20, 2017
The dampening straps in my washer keep breaking earlier than they should be and I don’t think it has to do with the way I am installing them. Can you clarify whether this would be an installation problem or if there’s something else on the go here
Hi Gina, dampening straps break prematurely when the washer is being overloaded, or is frequently off balance during cycle. I hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
February 12, 2018
Auto sensor turns water on tot 1 sac won''t fill up
For model number Wtw57esvw1
Hi Jerry,
Thank you for your question. If the dishwasher is not filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the direct drive water pump, the sensor switch, the lid switch, the hose clamp and the direct drive motor coupling. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
April 7, 2018
My washer makes a grinding noise
For model number HSWP1000M4WW
Hello Michael, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: tub bearing, drive pulley, belt, nut pulley, drive motor and inverter assembly, tub bearing washer, hub washer, split ring, and the shaft and tube assembly. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Roseanne
April 24, 2018
The washer makes a lot of noise and leaks when washing.
For model number GTWN2800D0WW
Hi Roseanne,
Thank you for your question. There are a few parts that you will want to check. The first part to check would be your tub seal. You should also check your nut and washers in that same area as well. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 5, 2018
When i first start washer why does water leak out top of the washer
Hi James,
Thank you for your question. If you have water leaking from the washer you will need to check the hoses, the pump, the water inlet valve and the water level or pressure switch. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Luis
October 13, 2017
Hello: I bought four ps271100 (tub dampening straps) and after installing it the washer still shakes too much and actually sounds like the tub is hitting the sides of the washer. Are there shorter straps that i could buy or do you have any other suggestions on how to avoid the tub shaking so much. Thanks
For model number WWSR3090T5WW
Hello Luis, thank you for contacting us. It sounds like you may need to replace the suspension rods. PS270536 PS270537 Good luck with the repair!
When my washer is agitating it’s making a moaning noise like it’s suffering or something. When its filling up with water or draining it doesn’t seem to make that noise. Could the washer tub need new dampening straps
Hi Rema, based on your symptoms we would not recommend new dampening straps. It sounds more like it could be a motor straining, or a faulty mode shifter. Please let me know if you have any further questions.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
April 25, 2018
Could it be that the dampening straps are not broken but maybe stretched and causing the washer tub to sit one sided?
Hi Roger,
Thank you for your question. That may be the issue. The only way you will know is if you check the straps. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":3,"name":"WH1X2727","title":"WH1X2727","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
