GE/GE_Thumb/00005070i01.gif
See part 41 in the diagram
Replacing your General Electric Dryer D-Shaped Knob Clip play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

D-Shaped Knob Clip

★★★★★
★★★★★
27 Reviews

Rated by 23 customers 

Really Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your DBSR463EG6WW!
 Fits your DBSR463EG6WW!
PartSelect Number PS268493
Manufacturer Part Number WH01X10106
Manufactured by GE
Product Description

D-Shaped Knob Clip Specifications

This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the timer will not advance, or the dryer shuts off too soon, the issue may be the control knob itself. This clip is sold individually. Although this part fits with some different brands, be sure to check the list of brands below to make sure it fits with your dryer unit. Refer to the manual provided by the manufacturer for further installation instructions.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer will not advance | Will Not Start | Will not shut off | Shuts off too soon
This part works with the following products:
Dryer, Washer, Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore, RCA.
Part# WH01X10106 replaces these:
AP3425457, 912208, WE00X0037, WE00X37, WE01X0980, WE1X980, WH1X10106
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Susan
    April 3, 2018
    Just received the d knob clip part #ps6011700. How do you get the clip to fit into the knob, i'm afraid i'm going to break it forcing it in?
    Hello Susan, thank you for your question. The D-Shaped Knob Clip should simply slide into the hole on the back of the knob itself. You may need to push quite hard to get it into place but it should not damage the knob itself. I hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Richard
    January 8, 2019
    I just need a new knob for my dryer. Part of the plastic broke on the female d and it will not turn the dryer temperature select. I am currently using needle nose pliers to turn setting when we need to change temp settings.
    For model number PTDN600EMOWT
    Hello Richard, thank you for your question. The replacement knob part number for your appliance is PartSelect Number PS1482200. Please enter the part number into the site for current price and availability. Good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Dena
    August 22, 2019
    The knob on far right that is connected to timer just turns freely. I have to turn dial assembly in order to start cycle. Now the machine started to not advance to next cycle. I have to manually turn dial assembly to get it to next cycle. What you i need to replace?
    For model number WHDSR109J5WW
    Hi Dena, we are not technicians however you will most likely replace the timer knob PS1482286 or Dial PS1482363. Thank you for your question and good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Craig
    February 11, 2018
    The washer would not turn on, the dial just spins, it will not "engage" the gear? Of the control/timer. I disassembled and there is a small plastic shaft that has teeth on both ends that the knob catches with and allows the dial to turn. One end of the plastic (black approximately 3/4" long by 3/8" od) appears "sheared" which i would guess goes inside the timer.
    For model number GLWN2800D0WS
    Hello Craig, thank you for your question. It sounds like you need the timer knob as well as the timer. The timer knob comes in two pieces, the knob you grab to turn part number PS6447712 and the diap part, that has the small indicator line on it part number PS6011700. If the shaft of the timer itself is cracked, or broken or worn, you would want to replace the timer as well. That is part number PS4704240. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Ronald
    August 25, 2017
    Control knob turns freely. Cannot pick cycle
    For model number HSWP1000M
    Hi Ronald, Thank you for your inquiry. If the knob is turning freely you may need a clip to secure the knob in place. We do have them in stock and the part number for it is PS270835. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Kimberly
    October 26, 2017
    Can's set temperature the knob broke and the male part it clips onto is missing also. What parts do i need to buy for this?
    For model number GCWP1000M0WW
    Hi Kimberly, Thank you for your question. It is likely you would have to replace the parts of your knob. I have listed all of the parts that you would need to replace if you are looking to replace all of your knob parts. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Doug
    August 20, 2022
    The cycle selector knob sticks when colors is selected, and continues to run water without advancing. It used all hot water from water heater. The permanent press and whites seem to advance ok.
    For model number HTWP1400F1WW
    Hello Doug, Thank you for the question. This could be an indication the Timer Switch is faulty and may need to be replaced. We hope this helps, good luck with this repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your General Electric Dryer D-Shaped Knob Clip

      Replacing your General Electric Dryer D-Shaped Knob Clip play video
      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 23 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Timer knob cracked twice. Found out the timer switch was bad.
      Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
      Other Parts Used:
      Timer Timer Knob
      • Jeffery from Waterford, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      718 of 763 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      START knob and plastic underneath broken
      It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all!
      Other Parts Used:
      Dryer Timer Timer Knob
      • Whitney from Vancouver, WA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      349 of 469 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer making grinding noises
      We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel.
      Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
      Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
      Incidently I am 78 years old. Thanks PartSelect.
      Other Parts Used:
      BELT DRIVE Lint Filter - White Frame Selector Knob with Clip Rear Drum Bearing Kit
      • Edwin from Seattle, WA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Screw drivers, Socket set
      276 of 413 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      All the control knobs broke
      I took apart the top of the dryer and removed the switch and replaced it with the new one. I also removed the knobs and replaced them. Easy
      Other Parts Used:
      Rotary Start Switch Timer Knob
      • Douglas from Santa Barbara, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      113 of 198 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      it would over flow with water
      First I removed the 4 screws that held the element in place. I pulled it out, and than I decided to check on the hose that was attached to the water level pressure switch, so I opened the front of the washer and sure enough, all I had to do was clean the hose attached to the water sensor, and as it turned out, I really did not need to change the water sensor, but at least I have a water level pressure switch, water sensor just in case I really do need to change it.
      Other Parts Used:
      Water Level Pressure Switch KNOB & CLIP Assembly
      • Josephine from Chevak, AK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Wrench set
      61 of 80 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The timer switch on our dryer
      The person on the phone was so helpful in locating the exact timer needed. We received the prt 3 days later and it was so easy to install. I would highly recommend this company. A local shop wanted to charge 3x more then what we paid.
      Other Parts Used:
      Timer Timer Knob
      • Richard P. from Bensalem, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      22 of 29 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Could not adjust timer/switch
      I had immediately assumed the problem was the timer/switch, P/N WE4M365 and foolishly ordered that part. Should you ever encounter non-adjustment of the timer/switch, try another knob from the console. That was the only problem here as it turns out. Also, the knob DOES come with the "D" shaped insert clip.
      Other Parts Used:
      Knob, Gray
      • Charles F from Kirkville, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      21 of 23 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I needed to replace the Timer Knob on my dryer
      I took the old one off and the new one went right onto the dryer. It was very simple to do.
      Other Parts Used:
      Timer Knob
      • Kimberly from Valencia, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      20 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Timer bound up, causing the knob to break.
      Disassembled back splash to inspect timer. Ordered parts (at a 50% discount from brick and mortar stores). Parts delivered in two days. Installed new timer and had everything back together in 10 minutes. No-brainer!
      Other Parts Used:
      Knob, Gray Timer
      • Thomas from Webster, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      20 of 33 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Start switch and knob busted
      Just followed the installation video. The only issue with the video was that a phillips screwdriver was specified and I actually needed a torx screwdriver.
      Other Parts Used:
      Selector Knob with Clip Rotary Start Switch
      • William from Islip Terrace, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      15 of 24 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      27 Reviews
      4.1
      Filter By Rating:
      • 5 Stars
        17
      • 4 Stars
        5
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        4
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS268493
      Manufacturer Part Number: WH01X10106
      Brand
      Model Number
      Description
      Kenmore
      363DDE8109VML
      Dryer
      Kenmore
      363DDE8200GAL
      Dryer
      Kenmore
      363DDE8509RCMAA
      Dryer
      Kenmore
      363DDE8509RCMWW
      Dryer
      Kenmore
      363DDE9200GAL
      Dryer
      Kenmore
      363DDE9600RCMAA
      Dryer
      General Electric
      51451Y2WW
      Washer
      General Electric
      56021A0WW
      Washer
      General Electric
      56031A0WW
      Washer
      General Electric
      56041A0WW
      Washer
      General Electric
      56051A0WW
      Washer
      General Electric
      56121TAWW
      Washer
      General Electric
      56121TBWW
      Washer
      General Electric
      56220TAWW
      Washer
      General Electric
      56220TBWW
      Washer
      General Electric
      56221B0WW
      Washer
      General Electric
      56221B1WW
      Washer
      General Electric
      56221B2WW
      Washer
      General Electric
      56221B3WW
      Washer
      General Electric
      56231B0WW
      Washer
      General Electric
      56231B1WW
      Washer
      General Electric
      56231B2WW
      Washer
      General Electric
      56231B3WW
      Washer
      General Electric
      56241B0WW
      Washer
      General Electric
      56241B1WW
      Washer
      General Electric
      56241B2WW
      Washer
      General Electric
      56241B3WW
      Washer
      General Electric
      56251B0WW
      Washer
      General Electric
      56251B1WW
      Washer
      General Electric
      56251B2WW
      Washer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service