Knob and Clip WH01X10061 | Official GE Part | Fast Shipping | PartSelect
Knob and Clip – Part Number: WH01X10061
Knob and Clip – Part Number: WH01X10061 https://partselectcom.azureedge.net/Schematics/GE/00111374i01.gif

Knob and Clip

PartSelect Number PS268451

Manufacturer Part Number WH01X10061

Manufactured by GE

Product Description

Knob and Clip Specifications

This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer. This part is sold separately from the timer dial. To complete this repair, you will need a pair of needle nose pliers to disconnect the old retaining clip.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Timer will not advance | Will Not Start

This part works with the following products:

Washer.

This part works with the following brands:

General Electric, Hotpoint.

Part # WH01X10061 replaces these:

277249, AP2044505, WH1X10061.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Part Videos

Replacing your General Electric Washer Knob and Clip

Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 23 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scott from Denver, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WH11X10033, WH01X10061
Dial broke off knob. Knob stripped.
Too easy! Push on dial, push on knob, insert clip. Done. Back in the day a repairman would have probably sold me a new timer with that knob and dial!
59 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Janet from Post Falls, ID
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WH12X10300, WH01X10061
dial for wash cycle wouldn't turn
opened the top part of washer where the dials are. Took out the old washer timer, inserted the new and replaced the knob and clip on the outside. Works like new.
28 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Marlin from Riverton, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WH01X10061
The local repair man ssaid we needed a timer switch for $90.00 plus labor
I took the control knob off and saw the teeth broken and got on line and ordered the part. It was an easy fix.
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Dennis from Middletown, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH2X650, WH01X10061
Wash Cycle Selection Knob had plastic teeth on the underside that stripped out with years of use.
I used a pair of needle nose pliers and a screw drive to remove the clip holding the knob on its shaft. The new knob came with its clip already in place, so it "popped" right on. I ordered the compression ring in error and it it was not needed
18 of 21 people found this instruction helpful.
Was this instruction helpful to you?
James from Ephrata, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WH11X10033, WH01X10061
teeth were stripped on dial
Just followed your instructions,which were very good and simple.Took old one off then put the Knob Dial on and it clicked right on..Very,Very easy
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Kelly from Lewiston, ID
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH11X10033, WH01X10061
The edge of the knob wore out
I pulled the old knob off and put the new one on.
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
William from Cornelia, GA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Parts Used:
WH12X10255, WH01X10061
Timer would not advance.
Removed the four torx screws on top of backsplash, unplugged timer, removed the one holding screw, slid timer back and removed.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Stewart from Richmond, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WH01X10061
knob wouldn't advance timer
Used this site to find probable problem - stripped teeth on knob - and how to get old knob off using needle nosed pliers to remove clip. So also ordered replacement knob from this site - got it in one day! Took about 2 minutes to put replacement knob on. Most of repair time was figuring out what the problem was.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
michele from Deerfield Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10061
washer needed new knob and clip
simply pulled the old one off with the broken clip and pushed the new one on. This is the third or fourth time we have used Parts Select and have always gotten the best service and best price.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Bryce from Melbourne, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WH01X10061
Timer job would not turn dial
Removed knob by using screwdriver to pry out plastic retainer. Put new knob on the timer. Took about 5 minutes. The problem was caused by the wearing out of the teeth on the knob.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
23 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    18
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    2
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Knob Dial
$24.52
PartSelect #: PS756514
This part is a replacement knob dial for your washer. The knob dial rotates and allows you to select your desired settings. It is a round piece of white plastic with a small, triangular gray arrow on it. The knob dial is...
Model Cross Reference

This part works with the following models:

PartSelect Number: PS268451
Manufacturer Part Number: WH01X10061
Brand
Model Number
Description
General Electric
EJRR4170E1WW
Washer
General Electric
GCXRP090B0WW
Washer
General Electric
GCXRP090B1WW
General Electric
GCXRP090B2WW
Washer
General Electric
GCXRP090D0WW
Washer
General Electric
GCXRP090D5WW
Washer
General Electric
GCXRP090DAWW
Washer
General Electric
GJSR2130B0WW
Washer
General Electric
GJSR2130B1WW
Washer
General Electric
GJSR2130B2WW
Washer
General Electric
GJSR3140D0WW
Washer
General Electric
GJSR3140D5WW
Washer
General Electric
GJSR3140DAWW
Washer
General Electric
GJSR3140DCWW
Washer
General Electric
GJSR4170D0WW
Washer
General Electric
GJSR4170D5WW
Washer
General Electric
GJSRP080B0WW
Washer
General Electric
GJSRP080B1WW
Washer
General Electric
GJSRP080B2WW
Washer
General Electric
GJSRP080B3WW
Washer
General Electric
GJSRP080D0WW
Washer
General Electric
GJSRP080D5WW
Washer
General Electric
GJSRP080DAWW
Washer
General Electric
GJSRP080DCWW
Washer
General Electric
GJXR2130B0WW
Washer
General Electric
GJXR2130B1WW
General Electric
GJXR2130B2WW
General Electric
GJXRP080B0WW
Washer
General Electric
GJXRP080B1WW
Washer
General Electric
GJXRP080B2WW