268413-1-M-GE-WH01X10022 -Tub Spring with Sleeves
Part Location Diagram of WH01X10022 GE Tub Spring with Sleeves
See part 314 in the diagram
( Grid squares measure 1x1 inch )
268413-1-S-GE-WH01X10022 -Tub Spring with Sleeves 268413-2-S-GE-WH01X10022 -Tub Spring with Sleeves 268413-3-S-GE-WH01X10022 -Tub Spring with Sleeves Part Location Diagram of WH01X10022 GE Tub Spring with Sleeves
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Tub Spring with Sleeves WH01X10022

 Fits your WCCH404H0WW!
★★★★★
★★★★★
1 Review

Rated by 4 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 105.85
  Special Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your WCCH404H0WW!
PartSelect Number PS268413
Manufacturer Part Number WH01X10022
Manufactured by GE
Product Description

Tub Spring with Sleeves Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH01X10022 replaces these:
AP3422300, 277226, WH01X10216, WH1X10022
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ann B - February 19, 2018
  Verified Purchase
Easy repair! Part was exactly what was needed.
The part was exactly what was needed. It came very quickly and I was back washing clothes.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Tub Spring
unplug power, remove top four screws, remove spring hold down clamps two screws each side, remove broken spring. install new spring (one end is bigger then the other) bigger end on tub, use string to lift spring into place, replace top all done. (tip use a string to pull tub spring into place much faster then trying with pliers just run string through hole where spring mounts and lift into place) All done.
Read less
  • David from Fairbanks, AK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring broke dropping washer drum onto leveler sleeve
Disconnected electricity and water supply. Took back and top off washer, placer 2x4 cross top. wrapped rachet tie down around drum and over 2x4 then using rachet slowly lifted drum. Once in place, attached spring, then used a 13mm socket to hold retainer in on level-shock pin and pulled out with an plier. Replaced both level shocks.
Other Parts Used:
Shock Absorber Assembly Tub Spring with Sleeves
  • Amie from Chesapeake, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud operation, no high speed spin, drum off center
First disconnected power. MY dryer was stacked so I removed the dryer. Removed lower front access cover screws and removed cover. With the dryer (or washer top cover removed) you have easy access to the two support springs. Each is held in place with a retainer that requires 2 screws to be removed. Have someone lift the drum from below through the lower access cover and have the person on top remove the damaged spring. Take the new spring and glue the plastic end hook protectors in place using crazy glue (the glue provided was dried out). Slip the large end hook into the hole on the drum and then hook the smaller end onto the washer frame at the top. Replace the spring retainer and reassemble the cover or dryer. Reconnect power and all should work just fine. Note: the shock absorber at the bottom of the drum may also need replacing at this time. The originals seem to be a poor design and the new replacement versions are much more robust.
Read less
  • Jeffrey from Ledyard, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Spring & broken level-shock.
Disconected power & hoses. Removed 4 screws from two tabs at rear of top. Slid top fwd & up to remove. Removed two screws from lower front panel and removed panel. Removed back cover screws and back cover. Placed sling arround tub & lifted with 2"X4" on strap placing additional wood under sling supported by edges of machine. Removed one scred and loosened mother that held spring hook in place. removed broken end and remainder of spring. hooked spring in hole in tub and raised spring upper hook on to support , re installed retainer. Went to lower side and removed plastic push bolts, by slipping a 1/2 " deep socker over front end and pulling from back with plirers.allign the holes in the new shock with the mount holes and nock them in place. remove sling from arround tub and re assemble all removed parts.
Read less
Other Parts Used:
Shock Absorber Assembly Tub Spring with Sleeves
  • STEWART from STOKESDALE, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Shock Absorber Assembly
$178.84
$178.84
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS268413
Manufacturer Part Number: WH01X10022
Brand
Model Number
Description
General Electric
SH208W0WW
Washer
General Electric
WCCH404F1WW
Washer
General Electric
WCCH404H0WW
Washer
General Electric
WCCH404H1WW
Washer
General Electric
WCCH404H2WW
Washer
General Electric
WCCH404H3WW
Washer
General Electric
WCCH404H5WW
Washer
General Electric
WCCH404V0WW
Washer
General Electric
WCCH404V1WW
Washer - WASHER
General Electric
WPXH214A0CC
Washer
General Electric
WPXH214A0WW
Washer
General Electric
WPXH214F0CC
Washer
General Electric
WPXH214F0WW
Washer
General Electric
WPXH214F1CC
Washer
General Electric
WPXH214F1WW
Washer
General Electric
WSXH208A0WW
Washer
General Electric
WSXH208A1WW
Washer
General Electric
WSXH208F0WW
Washer
General Electric
WSXH208F1WW
Washer
General Electric
WSXH208FW
Washer - GE Washing Machine Model WSXH208FW Parts
General Electric
WSXH208H0WW
Washer
General Electric
WSXH208H1WW
Washer
General Electric
WSXH208H2WW
Washer
General Electric
WSXH208H3WW
Washer
General Electric
WSXH208T0WB
Washer
General Electric
WSXH208V0WW
Washer
General Electric
WSXH208V1WW
Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Tub Spring with Sleeves
$ 105.85
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.