Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steve M - September 24, 2019
Verified Purchase
got The part very quickly
Very easy to install and works well
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dryer drum turned ok, but the gas heat did not start.
First I found and watched three videos on how to open the dryer and replace the igniter. Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown. I got on-line and ordered the new parts from PartsSelect in the afternoon and had t
... Read morehem in my hands the next morning by 9:30 am. I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first.
Gas dryer was not getting hot and smelled like gas inside drum
Removed lower front panel and then front including door (need to remove the top to access screws.) Replaced both the ingiter and heat detector. The tricky part was getting access to the long tunnel-like bracket that houses the igniter. Washer and Dryer are in a tight cutout space in very small laundry room.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wanda
July 31, 2019
Dryer squeals each load, and have to run loads through twice the normal cycle to dry completely.
For model number GTDP740GD0WW
Hi Wanda, thank you for your question. You may want to look at your rollers, idler arm, and your motor for being the issue. It sounds like they may either need to be changed because your drum may not be spinning as fast as it needs to be. I would suggest checking your pulley and rollers first. Good luck with your repair.
Was this helpful?
Thank you for voting!
Michael
November 28, 2023
GAS DRYER RUNS BUT NOT HEATING. REPLACED IGNITER AND CHECKED ALL THERMOSTATS AND FUSES FOR CONTINUITY ETC.ALL ARE TESTING OK. CLEANED OUT LINT ETC, PUT BACK TOGETHER STILL NO HEAT . PLEASE HELP
For model number GTD42GASJ2WW
Hi Michael, thank you for reaching out. Based on the description, the issue is probably with flame sensor, part number PS268031. The flame sensor monitors whether the igniter is hot enough to ignite gas to light the burner. We would suggest checking the sensor to fix the issue. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
