267865-1-M-GE-WE3X75 -Rear Drum Bearing
Part Location Diagram of WE3X75 GE Rear Drum Bearing
See part 543 in the diagram
( Grid squares measure 1x1 inch )
267865-1-S-GE-WE3X75 -Rear Drum Bearing 267865-2-S-GE-WE3X75 -Rear Drum Bearing 267865-3-S-GE-WE3X75 -Rear Drum Bearing Part Location Diagram of WE3X75 GE Rear Drum Bearing
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Rear Drum Bearing WE3X75

★★★★★
★★★★★
2 Reviews

Rated by 15 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 18.69
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS267865
Manufacturer Part Number WE3X75
Manufactured by GE
Product Description

Rear Drum Bearing Specifications

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint, Kenmore, RCA.
Part# WE3X75 replaces these:
AP2042531, 3410, WE03X0037, WE03X0072, WE03X0074, WE03X0075, WE3X37, WE3X37R, WE3X72, WE3X72R, WE3X74, WE3X74R
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Luis S - February 18, 2019
  Verified Purchase
Easy repair
Fast shipping dryer is back at work
★★★★★
★★★★★
Bob L - February 17, 2018
  Verified Purchase
Dryer drum bearing rear
What I wanted was not this version that i received . This version of the rear drum bearing for my hotpoint DLL1550BGLAD looks like a top hat. What the original bearing was like was a cylinder. This is the second time I've tried to order the original simple cylinder and received the top hat instead. I went ahead and installed it , following the supplied instructions. The bearing i replaced was the same in design and was still in fine functional condition. I just want to put an original style bearing in my dryer. This bearing requires leaving out original washers . This design like a cylinder with a brim is in place and seems to work fine .
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 15 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
drum noise - screeching & banging
Unfastened 4 screws and lifted the top panel; unfastened 2 top screws, loosened bottom 2 screws holding the front panel,lifted and removed front panel with door. Unfastened 10 screws holding rear access panel, removed panel. Relieved tension on drive belt, removed belt; Removed drum through front of cabinet. Rpelaced rear bushing. Replaced 2 front bearings. Reassembled all components
Read less
Other Parts Used:
Drum Slide Rear Drum Bearing
  • Richard from Bethlehem, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
squeeling dryer
pulled off door, front panel and rear access panel. unscrewed drum. cleaned every thing. removed and replaced front slides, belt idler pulley and rear bearing. Reassembled everything. Dryer is as quiet as a it was when brand new.
Other Parts Used:
Drive Belt Rear Drum Bearing Front Drum Slide Kit Idler Pulley Wheel
  • Dean from Mahtomedi, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
20 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud, rhythmic squealing when dryer was running
Opened up machine per instructions.
After examining drum slides and rear drum bearing, determined that all should be replaced due to excessive wear. Drum slides were the chief cause of the squealing, and they were as simple to replace as removing 4 nut drive screws, pulling off the old parts, and replacing with new. The drum bearing had to be coaxed out by tapping with a screwdriver, but the old was just able to be pushed in. All parts came with instructions, so the repair was easy. And no more squealing!
Read less
Other Parts Used:
Rear Drum Seal Kit Rear Drum Bearing Front Drum Slide Kit
  • Jeanne from Doylestown, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
29 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Berring was worn out and was squeeking
I opened the top,by removing the two screws inside the door
on the top. then removed the frount by removing the two 5/16 sheet metal screws inside facing the frount. then pulled the drum out and replaced the berring. Cleaned out the lent from the motor and duckings. Then reasembled.
  • Curtis from Penn Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squeaky dryer
I removed the rear panel to access the drive belt. Lowered the pulley to remove the belt and then took off the front panel and popped the top lid off. The belt was slightly frayed on the edges and looked a little old. Inside of the dryer was filled with lint, noticed the vent that sucks the lint from the dryer was almost totally blocked because off caked on lint. Probably from the moisture when we lived in Tx and had it in our garage. Sucked it out with the shop vac and scraped the rest. Removed the whole drum and that's when I noticed the rear drum bearing was totally destroyed and only a piece or two remained. Ordered the drum bearing and drive belt. I was about to put them on when I saw the drum slides were worn pretty thin. So I had to order more drum slides. That's why it took me so long to repair the dryer. If I had the parts already, it would have only taken an hour or so. I was pretty excited that I did it myself, since my husband usually fixes everything around the house. Easier than I thought :o)
Read less
Other Parts Used:
Drive Belt Rear Drum Bearing
  • Mandi from Rexburg, ID
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy dryer operation
Removed front panel and rear access panel of dryer. Removed drum just far enough to access old drum bushing and removed and replaced it. Removed pulley spring arm retainer bracket in back of dryer. Removed old pulley and nut and replaced them with new ones and new bushing. Only problem encountered is when my daughter's cat ate 2 of the bolts that hold the rear access cover. Dryer runs well and quiet and cat is fine.
Read less
Other Parts Used:
Rear Drum Bearing HINGE BUSHNG Idler Pulley Wheel
  • Carl from Montoursville, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
squeeking
Opened door and found recessed screws that screw into the top of the dry and removed them and then the front removed very easy. Then took of the plate on the back of the dryer to get to the pulley that the drive belt was on and took the belt off the pulley. The dry drum then slid out very easy, there was 2 of use which helped with the ease of getting the drum out. We replace the bearing and the idler pulley wheel. Vaccummed the lent out and then put it back together. Now it is squeek free.
Read less
Other Parts Used:
Rear Drum Bearing Rear Drum Bearing Kit Idler Pulley Wheel
  • carl from vinita, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
squeaking noise then drum stopped turning
The repair in retrospect was very easy. Not knowing alot about the dryer I made one mistake. I put the bearing in backwards and broke the rubber gasket. After ordering a new gasket and paying close attention to what I was doing it worked out fine. Saved me about $200 for a repairman.
  • mountain ridge pet from nashua, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Wasnt Drying ;Motor Sometimes Not Starting
Disassembled;(mainly just taking screws out) blew/vacuumed 50 pounds of lint from chassis/motor area ; replaced thermostat, and while I had it apart replaced belt and bearing. Runs/dries like new
Other Parts Used:
Drive Belt Cycling Thermostat - Limit: 145-15 Rear Drum Bearing
  • TOM from ATHENS, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer was vibrating and very noisy.
Followed an online website, removed the top, front, two rear access panels, disassembled the spring clip from the rear of the drum, took the belt off of the motor, removed the drum, took the rear bearing support out, replaced the bearing and reassembled the dryer.
  • Michael from Waukesha, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Rear Drum Bearing Kit
$88.17
$88.17
  In Stock
Front Drum Slide Kit
$56.49
$56.49
  No Longer Available
Drum Slide
$21.04
$21.04
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS267865
Manufacturer Part Number: WE3X75
Brand
Model Number
Description
Kenmore
363DDE8109VML
Dryer
Kenmore
363DDE8200GAL
Dryer
Kenmore
363DDE9200GAL
Dryer
General Electric
62150419
Dryer
General Electric
63150419
Dryer
General Electric
861-4730-090
Dryer - GE Dryer Model 861-4730-090 (8614730090, 861 4730 090) Parts
General Electric
861-4730-90
Dryer - GE Dryer Model 861-4730-90 (861473090, 861 4730 90) Parts
General Electric
BJLR473ET0WW
Dryer - Electric
General Electric
BJLR473EV0WW
Dryer - Electric
General Electric
BJLR473GT0WW
Dryer - Gas
General Electric
BJLR473GV0WW
Dryer - Gas
General Electric
BLLR113ET0WB
Dryer - Electric
General Electric
BVLR333ET0WW
Dryer - Electric
General Electric
BVLR333EV0WW
Dryer - Electric
General Electric
BVLR333GT0WW
Dryer - Gas
General Electric
BVLR333GV0WW
Dryer - Gas
General Electric
CADE165RAL
Dryer - Electric
General Electric
CADG265RAL
Dryer - Gas
General Electric
CADG265RBL
Dryer - Gas
General Electric
CADG265RCL
Dryer - GE Dryer Model CADG265RCL Parts
General Electric
D537E*119
Dryer
General Electric
D537E*129
Dryer
General Electric
D537E*139
Dryer
General Electric
DBLR333ET0AA
Dryer - Electric
General Electric
DBLR333ET0WW
Dryer - Electric
General Electric
DBLR333ET1AA
Dryer - Electric
General Electric
DBLR333ET1WW
Dryer - Electric
General Electric
DBLR333GT0AA
Dryer - Gas
General Electric
DBLR333GT0WW
Dryer - Gas
General Electric
DBLR333GT1AA
Dryer - Gas
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Rear Drum Bearing
$ 18.69
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.