This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the timer will not advance, or the dryer shuts off too soon, the issue may be the control knob itself. This clip is sold individually. Although this part fits with some different brands, be sure to check the list of brands below to make sure it fits with your dryer unit. Refer to the manual provided by the manufacturer for further installation instructions.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Dryer D-Shaped Knob Clip
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Maxine H - January 11, 2024
Verified Purchase
Fast service and great help.
Great help and fast shipping.
★★★★★
★★★★★
John C - February 24, 2022
Verified Purchase
nice to have an extra..
It was good but for 8 dollars i didnt realize the knob i ordered for the dryer came with the insert already.i should've checked into it a little better..I think your company is doing a Great Job and Appreciate the Help with my previous repairs..Continued Success to you and the Entire Part Select Team!!
★★★★★
★★★★★
Glorilyn M - December 30, 2021
Verified Purchase
Great part
The part was in great condition and came fast.
★★★★★
★★★★★
Steve J - June 1, 2021
Verified Purchase
Easy fix
After explaining the problem the repair person on the phone she began explaining how to do it, sent the part 5 minutes was drying clothes.
★★★★★
★★★★★
Paul K - June 24, 2019
Verified Purchase
The right part
I have never seen a better D shaped clip. Imagine my satisfaction at seeing it fit right on. Oh, and my joy at finding the old one inside while I was doing the repair, so I do not need to by another 5 dollar clip again. Yes...too expensive, but you want a repair to be right, so I bought it.
★★★★★
★★★★★
Tony B - March 23, 2019
Verified Purchase
Spare
Bought this clip just in case the old one broke when l was fixing the motor and putting the knob back on. It seemed to me that this could have been sent in a regular envelope, first class mail and arrived in half the time. The part was about the size of the eraser at the end of a #2 pencil. It came in a bubble wrap envelope.
★★★★★
★★★★★
Dale P - November 27, 2018
Verified Purchase
Extra Part
Note that the knob comes with a clip. So if you order the knob, you won’t need to order the clip.
★★★★★
★★★★★
Tia K - October 31, 2018
Verified Purchase
Works great!
Very please.. everything is working as expected.. !
★★★★★
★★★★★
Randy B - September 28, 2018
Verified Purchase
Very easy
Very easy to assemble. Dryer is back in working condition. Thank you
★★★★★
★★★★★
Thomas Z - September 28, 2018
Verified Purchase
Great Service & Quick Delivery
I ordered two parts, a knob and D-Shaped Knob Insert and both came wrapped and fast. Great Service!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Knob popped off
I returned the part because it did NOT fix my washer knob! The part did NOT FIX THE KNOB. I am waiting for MY REFUND PLEASE!!
After much research I decided to have to repaired all new models were not good. Reached out to local service repair because I beleved that it was the timer. $270 for service call REALLY and $125 for part. Reached ot to PART SELECT LOVE YOU GUYS) SAID WHAT WAS THE PROBLEM the chocie was a new knob or replace timer. I am 8
... Read more3 yr old woman and believe I could have done it myself if it wasn't for the problem of moving the dryer out. shut off electric four screws take out old replace new rewire the four screws WORKING NEPHEW DID IT IN TEN MINUTES NO CHARGE BUT THANK YOU PART SELECT FOR REAFFIRMING MY DIAGNOSIS. AUDREY
Read less
audrey from WHITING, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke the knob off on the start button
Remove the top panel removed the old part and replaced with new. Very easy
I simply placed the new knob on the shaft protruding from the dryer and it worked perfectly.
I was sure the selector would have to be replaced but, after reading at PartSelect that the majority of issues were caused by a broken D insert clip in the knob, I ordered both the clip and the knob. Because the knob came with a clip a
... Read morelready installed, I used that first. I have installed the D clip in the knob I removed and used it in place of a knob I removed from the dryer to repair this same problem a couple of years ago.
The timer knob was cracked and the metal "D"-Ring was broken on my GE cloths dryer
This repair was a no brainer repair. The factory replacement knob that I bought from this site comes with a new "D"-Ring. Some other aftermarket parts houses sell the knob and the "D"-Ring as seperate parts. The knob from this site already has the "D"-Ring ring installed in the knob. My "D"-ring was broken and I simply removed it with
... Read more my fingers. All I had to do was properly align the new know knob with the timer shaft and press it into place. If your "D"-ring is not broken and not still inside the old knob, you will need to pull it off the shaft with a pair of pliers before pressing the new knob onto the timer shaft. Dr. "B" The Hot Rod Doc
Read less
Lynn from MORGANTOWN, WV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob was cracked on the inside.
I just pulled off the old knob and put on the new one. Took 10 seconds. I did not need the D-Shaped knob insert clip after all.so glad i found this website.
The person on the phone was so helpful in locating the exact timer needed. We received the prt 3 days later and it was so easy to install. I would highly recommend this company. A local shop wanted to charge 3x more then what we paid.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
April 3, 2018
Just received the d knob clip part #ps6011700. How do you get the clip to fit into the knob, i'm afraid i'm going to break it forcing it in?
Hello Susan, thank you for your question. The D-Shaped Knob Clip should simply slide into the hole on the back of the knob itself. You may need to push quite hard to get it into place but it should not damage the knob itself. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dena
August 22, 2019
The knob on far right that is connected to timer just turns freely. I have to turn dial assembly in order to start cycle. Now the machine started to not advance to next cycle. I have to manually turn dial assembly to get it to next cycle. What you i need to replace?
For model number WHDSR109J5WW
Hi Dena, we are not technicians however you will most likely replace the timer knob PS1482286 or Dial PS1482363. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
February 11, 2018
The washer would not turn on, the dial just spins, it will not "engage" the gear? Of the control/timer. I disassembled and there is a small plastic shaft that has teeth on both ends that the knob catches with and allows the dial to turn. One end of the plastic (black approximately 3/4" long by 3/8" od) appears "sheared" which i would guess goes inside the timer.
For model number GLWN2800D0WS
Hello Craig, thank you for your question. It sounds like you need the timer knob as well as the timer. The timer knob comes in two pieces, the knob you grab to turn part number PS6447712 and the diap part, that has the small indicator line on it part number PS6011700. If the shaft of the timer itself is cracked, or broken or worn, you would want to replace the timer as well. That is part number PS4704240. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 8, 2019
I just need a new knob for my dryer. Part of the plastic broke on the female d and it will not turn the dryer temperature select. I am currently using needle nose pliers to turn setting when we need to change temp settings.
For model number PTDN600EMOWT
Hello Richard, thank you for your question. The replacement knob part number for your appliance is PartSelect Number PS1482200. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
August 25, 2017
Control knob turns freely. Cannot pick cycle
For model number HSWP1000M
Hi Ronald,
Thank you for your inquiry. If the knob is turning freely you may need a clip to secure the knob in place.
We do have them in stock and the part number for it is PS270835. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kimberly
October 26, 2017
Can's set temperature the knob broke and the male part it clips onto is missing also. What parts do i need to buy for this?
For model number GCWP1000M0WW
Hi Kimberly,
Thank you for your question. It is likely you would have to replace the parts of your knob. I have listed all of the parts that you would need to replace if you are looking to replace all of your knob parts. Good luck with your repair.
The cycle selector knob sticks when colors is selected, and continues to run water without advancing. It used all hot water from water heater. The permanent press and whites seem to advance ok.
For model number HTWP1400F1WW
Hello Doug, Thank you for the question. This could be an indication the Timer Switch is faulty and may need to be replaced. We hope this helps, good luck with this repair!
Bonjours ma laveuse de marque GE fait un bruit de frottement pendant le brassage, mais pour essoré aucun bruit ??
En attente de votre réponse .
Merci
For model number model laveuse GE ( GTAN5550DOWW)
Bonjour Jacques, Merci d'avoir écrit. Nous suggérons de vérifier l'usure ou les dommages du roulement de cuve et de la rondelle de roulement de cuve. Nous espérons que cela vous aidera !
