Heating Element Coil with Housing - 240V Specifications
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Edmund H - December 15, 2018
Verified Purchase
Not the fastest, but thorough.
The article I viewed said one hour, took me two. Works perfectly AND I learned how to do it. No complaints. Will H.
★★★★★
★★★★★
Eric C - October 3, 2018
Verified Purchase
Needed repair
The heater coil came and installed easily wow what a difference.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.2 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No heat
This is kind of embarrassing but ... Originally checked this site for what to get for the symptom and said 61% of time was high limit thermostat which was fairly cheap (14.95) but assumed with my luck, it would be the more expensive part the heating element coil with housing, so ordered that. (It was second on the list) Received it in
... Read moreno time, like less then 48 hrs. Was told when a friend stopped by that I shouldnt of ordered that, it was probably a thermostat as that is what they had to replace on theirs. So I said ok, I could always send the first thing back, so ordered the thermostat. It came quickly again. Took it out of the package and laid it down to change clothes to take the dryer apart and could not find where I laid it. Spent all evening looking and never did find it! So I ordered another one. (Figured by this time PartSelect was thinking this woman is crazy but good for business) Again it came quickly. Got it on fine but when I got to check the old one with the ohm meter (which I borrowed), nothing wrong with it. Nor with any of the other 4 thermostats. Finally took the drum off ( thanks to Youtube video for instructions) and obviously it was the initial part that I had ordered that needed replaced. Was a bit awkward to remove all the screws to get to it but not bad. Plugged everything back in and got the machine back together and works wonderfully! Lessons learned: 1st check the elements with an ohm meter (I will definitely be investing in one) 2nd do not open package until ready to use it especially after a bad day at work and 3rd go with initial gut instinct! I was very pleased with Part Select service!
Read less
Mavadene from Keosauqua, IA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
had to remove top of dryer 2 phillops screws at top in the door opening. flip top out of way take 2 screws out of insides that hold the front on. un hook all plugs and remove front of dryer. once u have did this you need to remove the drum by pulling it out of the bearing in the back un hook the belt from the motor and remove the drum thi
... Read mores should expose the element 4 screws and 3 wire to remove it. installation is the same
Read less
Joshua from Cardington, OH
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
109 of 135 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 22, 2019
Dryer won't tumble, i get a hard hum. I know its not the motor because i removed the belt and the motor operates fine. If i open the door, push the door button in with one hand, rotate the drum while i'm turning it on, it will tumble but feels somewhat forced.What part do you think it needs??
For model number DBLR333ET0AA
Hello John, thank you for your question. We would recommend checking the belt and idler pulley for the proper tension, and the drum rollers to be sure they are moving freely. You should also check the drum bearing to be sure its not seized or seizing. However, each of the aforementioned parts should cause noise from the appliance if they are bad. It is possible the winding in the motor or the capacitor are failing and because of this are not able to create enough power to push the drum to get it started. If the first parts mentioned are in good condition the motor should be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Billy
November 9, 2019
Need restring heating element kit
For model number NJLR473ET0WB
Hello Billy, thank you for your question. Unfortunately, we do not have a restringing kit listed under the model information,the element isetself, PartSelect Number PS265613, would have to be replaced. I hope this helps!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Dryer-Elements-and-Burners.htm"},{"position":3,"name":"WE11X103","title":"WE11X103","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
