264864-1-M-GE-WE03X10001 -Top Drum Glide Kit
Part Location Diagram of WE03X10001 GE Top Drum Glide Kit
See part 1220 in the diagram
( Grid squares measure 1x1 inch )
264864-1-S-GE-WE03X10001 -Top Drum Glide Kit 264864-2-S-GE-WE03X10001 -Top Drum Glide Kit 264864-3-S-GE-WE03X10001 -Top Drum Glide Kit Part Location Diagram of WE03X10001 GE Top Drum Glide Kit
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Top Drum Glide Kit WE03X10001

 Fits your WSM2780WBWW!
★★★★★
★★★★★
2 Reviews

Rated by 17 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 152.49
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WSM2780WBWW!
PartSelect Number PS264864
Manufacturer Part Number WE03X10001
Manufactured by GE
Product Description

Top Drum Glide Kit Specifications

This top drum glide kit comes with the adhesive.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
General Electric, Hotpoint.
Part# WE03X10001 replaces these:
AP2042548, 274452, WE03X10001, WE03X0073, WE3X10001, WE3X73
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David A - April 20, 2022
  Verified Purchase
Fixed dryer squeak, part fits well
Fit fine. Works fine. Anytime you have the dryer front panel off, inspect the teflon pads for wear. If they're worn down, might as well take the opportunity to replace them. Especially if the dryer squeaks or clothes sometimes get caught in the top front of the drum. Install so that the overhanging portions of the teflon pads are toward the drum. (Instructions are unclear on that point.) The first time I used this kit, seven years ago, I installed this kit I the wrong way, i.e. with the overhangs toward the door. I trust this correctly-oriented replacement will last longer, now that it offers more bearing surface for the drum to glide on. Doesn't take too much adhesive to stay in place.
★★★★★
★★★★★
Peter K - December 18, 2018
  Verified Purchase
Easy repair.
Easy repair. Parts worked as expected. Instructions were excellent. Best to use a wire brush on your drill to remove all glue from previous installation and to clamp each new piece until glue dries. I needed both this part and the other felt part to effect repair. Can't believe how poor the original GE design is, when GE could have made this part long enough to circle the entire drum. Would buy from PartSelect again, but hopefully not too soon.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lots of noise from the drum scraping inside front of dryer and clothes being pinched.
First you need two people to get dryer to a location with plenty of elbow room. Then we just followed the instructions on the parts page. At our residence we take the dryer apart at least once a year to give it a good cleaning. During the year lots of dust accumulates inside the dryer box. This time upper and lower felt needed replacing; it is an easy fix just remove the old parts and install new the ones. Removing the old glue was the only slow down, but don't hurry this step you want a good clean surface to glue new felt on. While repairing the felt we discovered the insulation was cut away on one wire leading to the gas igniter. We repaired the wire and reassembled the dryer. We used the dryer the next day and discovered the wire harness was not reconnected. Another reason to have 4 hands and four eyes for this repair.
Read less
Other Parts Used:
High Temperature Adhesive Lower Felt Seal Top Drum Glide Kit
  • Mark from SEABROOK, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer sounded like a stuck pig
I ordered the rear bearing kit from the local supplier here in Marsh Harbour, Abaco the Bahamas. Delivery for the kit was 3 to 4 weeks from my local supplier.NOT PARTSELECT.
While waiting I found this site and after reading the VERY helpful instructions from your customers, I realised that I would probably need additional parts, top and bottom front felt seals, maybe a new drive belt.
I ordered these online and had the parts deliverd to a friends address in West Palm Beach Florida. The parts arrived in about 2 days. My wife was already there and brought the parts back.

Installation was very straight forward. Read the other installation reports and you will not have a problem.
The only thing I can add is, DO NOT LOOSE THE SMALL BALL BEARING. I did and it took me about an hour to find it.
My suggestion is to do a dry run installation of the bracket WITH OUT the small ball bearing. Tape the backing plate?that keeps the ball breaing inplace to the outside of the back panel with duct tape so that the screw hole will line up. Once this is done put some grease (Supplied with the kit) in the hole on the nylon bracket and attach with the two screws, do not over tighten. Grease up the area where the rear bearing shaft support will sit.

Installation of the rear bearing shaft support was straight forward. This is on the dryer drum. Extra hands are must for this.

I was very pleased with Partselct.
Dryer works like new.
Read less
Other Parts Used:
Drum Belt Lower Felt Seal Top Drum Glide Kit
  • Christopher from Palm Beach Gardens, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud squeak/burnt edges of clothes
I used the puddy knife at the top of the front panel seam. I pushed in the knife till I heard the top panel release. I then did the other side of the front panel till I heard the same sound.I now could raise the top of the dryer. Inside the front panel(on the left and the right) are two philips head screws that I loosened and took off, releasing the front panel,however I had to use the needle-nose pliers to take off two electr. connections to the door switch. After I took off the front panel, there it was ,THE PROBLEM. The top glide and bottom felt were shot and worn out. I did as the directions told me, and with a 1" chissal, I gently scraped off the old glide and felt, without scratching the metal. Cleaned off the residue of old glue with Goo-Gone. Now I put glue on the top part of the portal(which I marked before I removed it) waited a minute for it to get tacky and layed the new top glide on, gently pressing down to insure adhesion. It dried right away. I did the same with the lower felt glide.I did all the reinstallation of the panels in reverse order and everything fit perfectly and smoothly. I waited about an hour to make sure all was dried (glue) and turned it on.It was alittle stiff running at first, but then it ran smooth as silk and no more squeaking or burning of my clothes.Thank you partselect!!!!
Read less
Other Parts Used:
Lower Felt Seal Top Drum Glide Kit
  • Philip from Irmo, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud noise & clothes hanging in drum.
1. Remove power cord from wall outlet. Unlatched the top lid of the dryer by pushing a flat screwdriver under the R & L sides where a metal clip on each side holds the top down.
2. Removed the yellow clip screwed onto the top frame.
3. Removed the front frame of the dryer by unscrewing the two screws holding the front frame on – one on either side.
4. Mark w/ an (x) on same side of alignment for the 2 wiring connectors before separating them.
5. Removed the front panel by tilting it forward & lifted to unlatch it from the 2 clips at the bottom of dryer.
6. Unwound the belt encircling the drum by releasing the tension between the tensioner roller & drive pulley. (Its better to remove back access panel at this time & do this at the back since I found it necessary to do this anyway when re-installing the new belt).
7. W/ lifting motion, pulled the drum out from the plastic holder attached to the back of the dryer frame. Guided & completely removed the drum out of the dryer.
8. Unscrewed the 3 screws holding the old big bearing to the back of the drum.
8. Unscrewed the 2 screws & removed the plastic that had held the bearing at back of the frame.
8. Installed the new bearing by screwing it to the back of the drum with 3 screws. Be careful not to strip screws. Used help to hold new bearing in place & aligned w/ screws.
9. From the front, installed the plastic holder to the back of the frame by 2 screws and put the ball bearing in-between holder & the metal strip retainer coming from the back of dryer.
10. Used the grease that came with the kit on the plastic holder & the big bearing at the back of the drum.
11. Replaced w/ new belt then re-inserted the drum back into the body of the dryer frame, w/ lifting motion, re-inserted the bearing into the plastic holder.
12. Putting the belt into the drive & tension pulleys through the back access panel was easy but could be very hard to do if coming from the front.
13. Had to replace the front panel's top felt w/ glides that holds the drum at the front w/ a new one. Really important to pay attention to where the plastic glides excess portion is facing (towards front panel), otherwise the front panel might not fit when you snap it back to place.
14. Removed old felt remnants w/ blade scraper & sandpaper. Used adhesive that came w/ kit. Once tacky, put the new felt w/ glides on & used clamps to hold it in place.
15. Waited for 2 hrs. (watched a movie) then re-installed front panel. Make sure that the drum (front) lid rides on top of the plastic glides.
16. Latched bottom of front panel to the metal clips. Replace the 2 screws back into place holding the front panel.
17. Snapped the wiring connectors in place where the (x) marks align.
18. Lowered the top panel & snapped it back into place
Note: All parts came w/ fast delivery & OEM fit - very satisfied! Took my time & on every chance I cleaned & vacuumed all areas of lint & dirt since the dryer hasn't been serviced for more than 10 years...
Read less
Other Parts Used:
Drum Belt Rear Bearing Kit Top Drum Glide Kit
  • Raul from Fountain, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
79 of 84 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Laundery was getting caught between the drum and the front of the dryer causing burn marks on the laundry
1. lift up the top of the dryer by releasing the 2 clips using a putty knife
2. remove the 2 screws holding the front of the dryer to the cabinet
3. Unplug the front panel wires
4. lift off the front of the dryer
5. remove the old glide and scrape off all old glue
6. apply new glue, and put new glide in place. Hold with spring clamps for 30 minutes or so.
Read less
Other Parts Used:
Top Drum Glide Kit Rotary Knob
  • Terry from Owasso, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
clothes were getting caught between front cover and drum . Tearing softer material and staining the other.
used a putty knife to press in the font clips removed top then front panel . pulled off the old felt and glids what was left of them. then used a 2'' air grinder with a 3m scuff pad to remove the old glue and remaining felt then glued the new ones back in place gave it about 30mins to set up then put it back together and works good as new
Read less
Other Parts Used:
Lower Felt Seal Top Drum Glide Kit
  • heath from winterville, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum Guide And Seal Wore Out
Lifted top and removed front panel and cleaned old glue off. Put new glue on put seal used spring loaded cloth pins to hold till glue dried
  • GARY from SPRING VALLEY, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes snagging and getting stained in dryer
Hardest part was getting the top off which ended up being quite easy, once I knew how. At the front of dryer, between the top and the cabinet, there are two spring clips that hold the top to the bottom. I could feel them with the putty knife but wasn't sure how to release them. Push on them with the blade of the stiff putty knife ... push hard and they will release. When the top was off I could see the screws that held the front. I unscrewed those, had easy access to the front glide that needed to be replaced. Pulled the old one off, followed the directions to glue the new one on, gave it about an hour to dry, reassembled and away we went. No more snagging.
Read less
  • John from Granbury, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
backet seteled and belt spined arround without going traction
I Replased a belt and germetic lower and uper belt
  • Yuriy from West Springfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dryer was eating our clothes. Clothes getting stuck in the front of the dryer between the drum and the front of the dryer.
The only part of the this repair that I struggled with was researching how to pull the front and top of my dryer loose. A putty knife and good instructions solved the problem.
I removed the guides and bottom felt from the diameter of the drum and cleaned the surface by scraping with a razor knife.
I applied the glue and placed the new guides and felt along the drum, securing them with small clamps.

I left the clamps in placed while I cleaned up the inside and behind the dryer.
I reassembled the dryer and let it sit until the next day.
All is well and our drawer are no longer being gobbled up!
Read less
Other Parts Used:
Lower Felt Seal Top Drum Glide Kit
  • Donald from Panama City Beach, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard Gaskin
November 16, 2019
The front of my drum is sagging and making a rubbing noise, sometimes my washcloths are getting stuck between the front of drum and front door assembly.
For model number DBL333GY0WW
PartSelect logo
Hi Richard, have you checked the drum felt seal PS268338 ? Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Lower Felt Seal
$104.50

  No Longer Available
  • 1
Back to Top
You May Also Need ?
Lower Felt Seal
$104.50
$104.50
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS264864
Manufacturer Part Number: WE03X10001
Brand
Model Number
Description
General Electric
DBL333EA0AA
Dryer - Electric
General Electric
DBL333EA0CC
Dryer - Electric
General Electric
DBL333EA0WW
Dryer - Electric
General Electric
DBL333EB0CC
Dryer - Electric
General Electric
DBL333EB0WW
Dryer - Electric
General Electric
DBL333EY0AA
Dryer - Electric
General Electric
DBL333EY0WW
Dryer - Electric
General Electric
DBL333GA0AA
Dryer - Gas
General Electric
DBL333GA0CC
Dryer - Gas
General Electric
DBL333GA0WW
Dryer - Gas
General Electric
DBL333GB0CC
Dryer - Gas
General Electric
DBL333GB0WW
Dryer - Gas
General Electric
DBL333GY0AA
Dryer - Gas
General Electric
DBL333GY0WW
Dryer - Gas
General Electric
DBR453EA0WW
Dryer - Electric
General Electric
DBR453GA0WW
Dryer - Gas
General Electric
DCB330EB0KC
Dryer - Electric
General Electric
DCB330EB0WC
Dryer - Electric
General Electric
DCB330EY0AC
Dryer - Electric
General Electric
DCB330EY0WC
Dryer - Electric
General Electric
DCB330GB0KC
Dryer - Gas
General Electric
DCB330GB0WC
Dryer - Gas
General Electric
DCB330GY0AC
Dryer - Gas
General Electric
DCB330GY0WC
Dryer - Gas
General Electric
DCB330GY1AC
Dryer - Gas
General Electric
DCB330GY1WC
Dryer - Gas
General Electric
DCCH43EA0WW
Dryer - Electric
General Electric
DCCH43GA0WW
Dryer - Gas
General Electric
DCD330EB0KC
Dryer - Electric
General Electric
DCD330EB0WC
Dryer - Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Top Drum Glide Kit
$ 152.49
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.