Part Location Diagram of WD7X14 GE Door Cable and Eyelet
See part 733 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Door Cable and Eyelet WD7X14

 Fits your GSD4330Y72WW!
★★★★★
★★★★★
14 Reviews

Rated by 49 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 25.94
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GSD4330Y72WW!
PartSelect Number PS263918
Manufacturer Part Number WD7X14
Manufactured by GE for General Electric, Hotpoint, Kenmore, Amana
Product Description

Door Cable and Eyelet Specifications

This part is sold individually. It is recommended that both sides are changed when replacing one.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
Part# WD7X14 replaces these:
AP2038829, 2291, WD07X0013, WD07X0014, WD7X13
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.7
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 49 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Tub Baffles Disintegrated & Door Cable Broken
I used Partselect.com website to educate myself on parts needed for my model of dishwasher. Also reviewed repair instructions by others on the website and learned repair and replacement was straight forward and simple. I ordered parts from Partselect.com, they came promptly, and were the correct parts. Based on the repair instructions, I removed the fascia panel at the bottom of my dishwasher to expose the cable and spring setup for my model dishwasher, cleaned the area and installed the new parts - it took only a few minutes - then I replaced the panel and secured it with the sheet metal screws that were holding it in place. I opened the dishwasher door. My wife had already cleaned the corners of the tub where the old baffles had been, so I pressed the new baffles into place with my fingers - no tools were required for baffle installation. Dishwasher is back in service; thanks to the information, parts and prompt service provided by Partselect.com ! My wife is pleased and so am I.
Other Parts Used:
Corner Tub Baffle - Lower Left Corner Tub Baffle - Lower Right Door Cable and Eyelet Normal Duty Door Spring
  • Melvin from Kalispell, MT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door counterbalance cable
Very easy - the hardest part is getting down on the floor to remove 4 Phillips screws which hold on the two trim panels below the door and, even tougher, getting the holes to line back up and reinstall them. Visibility is limited and an extra set of hands to hold the panels in position while you start the screws is really helpful. Otherwise, it's just a matter of hooking the cable eyelets onto the door, routing the cables over the nylon rollers, hooking one end of the spring to one of the cables and stretching it across to hook into the other cable. It's easier to do the rear spring first and to use the lower tension spring first if, like mine, the two springs ae different tension.
  • Dave from IJAMSVILLE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door mech. broke, door came down
this unit is 29yrs old. I used your directions, just took a little time to make sure how to put together. All went well
  • sam from ROCKFORD, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would not stay up
removed old door cable and eyelet and replaced
  • larry from merced, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One Spring Cable Broke
Hooked one side & streched springs
Other Parts Used:
Door Cable and Eyelet Lower Front Dishrack Wheel
  • wayne from leetonia, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Diswasher Door became heavy and fell open.
I found that the door cable, which attaches to a spring system (which keeps the door from slamming open,) had broken. It was a simple repair. Remove the bottom panel of the dishwasher, reattach the cables to the hooks if they've come off, reattach the springs to the cables. Make sure the cable threads around the guide wheels. Remarkably simple!
  • Brian from La Grange Park, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Door Cable
Remove bottom cover diswasher place the eyelet on the side of door attach the spring to the cable thats it. . . Thank you!!!
  • Thomas from Wesley Chapel, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
left hand cable broke with age
connected cable to door springs, eyelet to hook on door frame then pulled cable under rollers on bottom of frame.... works like it was made to work
  • Randall from Hillsboro, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Springs Broke
This was a simple fix. I removed the bottom panel and the broken springs for the door were exposed. Just a matter of putting the new ones around the pulleys on each side of the unit and connect the springs to one end of the cable and to the side of the door where they just slide on.
  • Rick from La Motte, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door cable broke while openning the door causing it to fall.
After removing the lower panels below the door, I was able to see the broken cable. After looking at a diagram on your web site I identified and ordered the part. It arrived within 24 hours. It was easy to install. Total repair took about 1/2 hour.
  • ray from worcester, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Martha
November 19, 2018
Can you provide for me the length of the dishwasher cable part select: Ps263918,
PartSelect logo
Hello Martha, Thank you for the question. According to the 1inch grid, this cable is approximately 9" long. Hope this helps, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
November 21, 2017
The cable that holds the springs for the door broke and the fix seems fairly simple, except i'm not 100% sure where the cable attaches to the door. Both cables fell off when the one broke, so i don't know where they were originally attached to the door and i can't find a video or picture anywhere that shows where they attach. Can you provide any help on this, the instructions i found on your site were not clear enough for me to verify the correct location.
For model number GSD500D03AW
PartSelect logo
Hi Gary, Thank you for your question. The cables are originally attached to the hinges that are on the door. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ray
February 4, 2020
Was wondering if part select part number ps263918 fit for my dishwasher model 3631435597. Thanks for any help
For model number 3631435597
PartSelect logo
Hello and thank you for writing. Yes, part PS263918 should fit your model. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Terrie
November 25, 2017
Everything I read says to remove bottom of dishwasher plate with 4 screws. My plate has 8 screws. Am I removing the correct plate. Just below dishwasher door, right?
For model number GSD600D03
PartSelect logo
Hi Terrie,Thank you for the question. Yes some appliances have more screws on the plate. It depends on the model. Hope this helps!

Was this helpful?
Thank you for voting!
Leeah
March 13, 2018
Washer door latch will not unlock. I can't start the washer
For model number hda487k-02bk
PartSelect logo
Hi Leeah, Thank you for your question. If the door latch will not unlock, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door cable and eyelet, the detergent cup shaft and lever, the detergent release arm, the detergent cup door spring, the interlock switch and the latch keeper. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
John
January 23, 2019
Wire in door broke. Door no longer stay up unless you lock it
For model number GSD940M20
PartSelect logo
Hello John, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS263918. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS263918
Manufacturer Part Number: WD7X14
Brand
Model Number
Description
Kenmore
18385
Dishwasher - DISHWASHER
Kenmore
361402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
3631401190
Dishwasher
Kenmore
3631401191
Dishwasher
Kenmore
3631401590
Dishwasher
Kenmore
3631401591
Dishwasher
Kenmore
3631401592
Dishwasher
Kenmore
3631401890
Dishwasher
Kenmore
3631401891
Dishwasher
Kenmore
3631401892
Dishwasher
Kenmore
3631402190
Dishwasher
Kenmore
3631402191
Dishwasher
Kenmore
3631402192
Dishwasher
Kenmore
3631402590
Dishwasher
Kenmore
3631402591
Dishwasher
Kenmore
3631402592
Dishwasher
Kenmore
3631402890
Dishwasher
Kenmore
3631402891
Dishwasher
Kenmore
3631402892
Dishwasher
Kenmore
3631404193
Dishwasher
Kenmore
3631404194
Dishwasher
Kenmore
3631404196
Dishwasher
Kenmore
3631404593
Dishwasher
Kenmore
3631404594
Dishwasher
Kenmore
3631404595
Dishwasher
Kenmore
3631404596
Dishwasher
Kenmore
3631404893
Dishwasher
Kenmore
3631404894
Dishwasher
Kenmore
3631404895
Dishwasher
Kenmore
3631404896
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service