Part Location Diagram of WD12X332 GE Upper Track Roller Kit
See part 655 in the diagram
Replacing your General Electric Dishwasher Upper Track Roller Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Upper Track Roller Kit WD12X332

★★★★★
★★★★★
2 Reviews

Rated by 5 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 12.35
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS259157
Manufacturer Part Number WD12X332
Manufactured by GE for General Electric, Kenmore, Hotpoint
Product Description

Upper Track Roller Kit Specifications

The track roller on your dishwasher allows the tracks that hold the upper dish rack to slide in and out effectively. If you notice that your upper dish rack is struggling to slide in and out, you may need to purchase a new track roller kit to replace the damaged one. This kit comes with the roller, one screw, and a washer for easy assembly. The roller is approximately 1-1/4 inches in diameter and the screw is approximately 1-1/2 inches in length. To complete this repair, you will need to remove the upper dish rack, as well as the rail.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Dishwasher Upper Track Roller Kit

Replacing your General Electric Dishwasher Upper Track Roller Kit
Troubleshooting
This part works with the following products:
Dishwasher.
Part# WD12X332 replaces these:
AP2039133, 270640, WD01X1329, WD12X10070, WD1X1329
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Upper rack rollers were sloppy & would lock up with the sde track jumping off the wall rollers
and figured that was the problem. After a call to a delightful young lady in your service department We concluded that these rollers were the only thing available. Dejected I went back to my project with the intent of removing the wheels and grinding them down BUT 1st I gave it one more try and after some careful alined--Presto they rolled into the 2 tracks. I snapped the end caps on tracks--Problems solved--Please note: if these parts were taken off of my Bill Please Recharge them to me.THANK YOU ALL (IT WORKS LIKED A NEW WASHER) RON TUCKER 302 449-0342
Other Parts Used:
Dishwasher Dishrack Rollers and Axles RACK SLIDE END CAP Upper Track Roller Kit
  • Ronald from MIDDLETOWN, DE
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper try roller was broken
Unscrewed the old roller. But it was difficult to replace the roller as the rim of the roller would not fit into the slide mechanism and allow the screw to engage the hole. What I thought would be a 2 minute job turned out to be more like 20 minutes. I suspect there is a way to release the slide stop so that the top basket could be removed with its slide bar, but I did not see how to do that. I finally was able to "force" the screw into the hole
  • Howard from Mount Prospect, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper tray very difficult to pull out and push in
Using a screwdriver removed upper tray slide end caps.
Removed upper tray.

Removed and replaced upper tray rollers.

Using screwdriver removed track rollers and Track.

Assembled track with rear stops.
Installed lower track rollers.
Holding track in place installed upper track rollers. Installed upper tray and and front track stops.
Other Parts Used:
RACK SLIDE END CAP Wheel and Stud Upper Rack Slide Upper Track Roller Kit
  • ROBERT from YOUNGSTOWN, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper rack would fall off when pulled out
I installed new rollers and rack clips. The old ones had cracked and would not keep the rack in the tracks. I went to buy a new dishwasher which would have cost around $500. I bought $60 worth of parts although I probably could have just bought the clips for $15 and now the dishwasher is good to go! A real money saver.
Other Parts Used:
Dishwasher Dishrack Rollers and Axles RACK SLIDE END CAP Upper Track Roller Kit
  • Dave W from Granite Bay, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts were old and worn out
The repair was easy. A couple turns of a screwdriver was all that was necessary to remove the rollers and slide assembly. The I simple installed the new rollers. Slid the slide into place between the rollers and then added the back caps to the slide. Replaced the rack rollers on the top basket and then slid it into position between the new slides. Once in place, I attached the end caps to the front of the slide. Simple and quick.
Other Parts Used:
Upper Rack Slide Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP Upper Track Roller Kit
  • Dave from Littleton, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
32 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259157
Manufacturer Part Number: WD12X332
Brand
Model Number
Description
Kenmore
1858
Dishwasher - Kenmore Dishwasher 18585(1988)
Kenmore
361402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
36314031000
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314071792
Dishwasher
Kenmore
36314071793
Dishwasher
Kenmore
36314071794
Dishwasher
Kenmore
36314072793
Dishwasher
Kenmore
36314072794
Dishwasher
Kenmore
36314072795
Dishwasher
Kenmore
36314074792
Dishwasher
Kenmore
36314074793
Dishwasher
Kenmore
36314074794
Dishwasher
Kenmore
36314075792
Dishwasher
Kenmore
36314075793
Dishwasher
Kenmore
36314075794
Dishwasher
General Electric
36314081991
Dishwasher - DISHWASHER
Kenmore
36314081992
Dishwasher
Kenmore
36314081993
Dishwasher
Kenmore
36314191991
Dishwasher
Kenmore
36314191992
Dishwasher
Kenmore
36314191993
Dishwasher
Kenmore
36314192991
Dishwasher
Kenmore
36314192992
Dishwasher
Kenmore
36314192993
Dishwasher
Kenmore
36314194991
Dishwasher
Kenmore
36314194992
Dishwasher
Kenmore
36314194993
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service