GE/GE_Thumb/00125643i02.gif
See part 654 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Upper Track Roller Kit

★★★★★
★★★★★
2 Reviews
$ 6.57   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS259157
Manufacturer Part Number WD12X332
Manufactured by GE
Product Description

Upper Track Roller Kit Specifications

The track roller on your dishwasher allows the tracks that hold the upper dish rack to slide in and out effectively. If you notice that your upper dish rack is struggling to slide in and out, you may need to purchase a new track roller kit to replace the damaged one. This kit comes with the roller, one screw, and a washer for easy assembly. The roller is approximately 1-1/4 inches in diameter and the screw is approximately 1-1/2 inches in length. To complete this repair, you will need to remove the upper dish rack, as well as the rail.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WD12X332 replaces these:
AP2039133, 270640, WD01X1329, WD12X0332, WD12X10070, WD1X1329
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your General Electric Dishwasher Upper Track Roller Kit

Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 5 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Parts were old and worn out
    The repair was easy. A couple turns of a screwdriver was all that was necessary to remove the rollers and slide assembly. The I simple installed the new rollers. Slid the slide into place between the rollers and then added the back caps to the slide. Replaced the rack rollers on the top basket and then slid it into position between the new slides. Once in place, I attached the end caps to the front of the slide. Simple and quick.
    29 of 40 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Upper tray very difficult to pull out and push in
    Using a screwdriver removed upper tray slide end caps.
    Removed upper tray.

    Removed and replaced upper tray rollers.

    Using screwdriver removed track rollers and Track.

    Assembled track with rear stops.
    Installed lower track rollers.
    Holding track in place installed upper track rollers. Installed upper tray and and front track stops.
    5 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Upper rack rollers were sloppy & would lock up with the sde track jumping off the wall rollers
    and figured that was the problem. After a call to a delightful young lady in your service department We concluded that these rollers were the only thing available. Dejected I went back to my project with the intent of removing the wheels and grinding them down BUT 1st I gave it one more try and after some careful alined--Presto they rolled into the 2 tracks. I snapped the end caps on tracks--Problems solved--Please note: if these parts were taken off of my Bill Please Recharge them to me.THANK YOU ALL (IT WORKS LIKED A NEW WASHER) RON TUCKER 302 449-0342
    • Ronald from MIDDLETOWN, DE
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The upper try roller was broken
    Unscrewed the old roller. But it was difficult to replace the roller as the rim of the roller would not fit into the slide mechanism and allow the screw to engage the hole. What I thought would be a 2 minute job turned out to be more like 20 minutes. I suspect there is a way to release the slide stop so that the top basket could be removed with its slide bar, but I did not see how to do that. I finally was able to "force" the screw into the hole
    • Howard from Mount Prospect, IL
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WD12X332
    2 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The upper rack would fall off when pulled out
    I installed new rollers and rack clips. The old ones had cracked and would not keep the rack in the tracks. I went to buy a new dishwasher which would have cost around $500. I bought $60 worth of parts although I probably could have just bought the clips for $15 and now the dishwasher is good to go! A real money saver.
    2 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      2 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        1
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS259157
          Manufacturer Part Number: WD12X332
          Brand
          Model Number
          Description
          Kenmore
          18385
          Dishwasher - DISHWASHER
          Kenmore
          361402891
          Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
          Kenmore
          3631401190
          Dishwasher
          Kenmore
          3631401191
          Dishwasher
          Kenmore
          3631401590
          Dishwasher
          Kenmore
          3631401591
          Dishwasher
          Kenmore
          3631401592
          Dishwasher
          Kenmore
          3631401890
          Dishwasher
          Kenmore
          3631401891
          Dishwasher
          Kenmore
          3631401892
          Dishwasher
          Kenmore
          3631402190
          Dishwasher
          Kenmore
          3631402191
          Dishwasher
          Kenmore
          3631402192
          Dishwasher
          Kenmore
          3631402590
          Dishwasher
          Kenmore
          3631402591
          Dishwasher
          Kenmore
          3631402592
          Dishwasher
          Kenmore
          3631402890
          Dishwasher
          Kenmore
          3631402891
          Dishwasher
          Kenmore
          3631402892
          Dishwasher
          Kenmore
          36314031000
          Dishwasher
          Kenmore
          36314031001
          Dishwasher
          Kenmore
          36314032000
          Dishwasher
          Kenmore
          36314032001
          Dishwasher
          Kenmore
          36314038000
          Dishwasher
          Kenmore
          36314038001
          Dishwasher
          Kenmore
          36314039000
          Dishwasher
          Kenmore
          36314039001
          Dishwasher
          Kenmore
          3631404193
          Dishwasher
          Kenmore
          3631404194
          Dishwasher
          Kenmore
          3631404196
          Dishwasher

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service