This part is the replacement timer knob for your dishwasher. It is made of white plastic with a gray indicator line, and it is approximately 2 inches long and 1 inch wide. The timer knob turns on the shaft and allows you to choose the correct setting for your dishwasher. The main reason you would be replacing this knob, is if the old one is broken or stripped, and it will not turn the shaft. To replace this knob, carefully remove it from the shaft, and replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD09X10025 replaces these:
AP3425315, 876887, 165D5843P003, WD9X10025
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kay
April 21, 2018
When i turn the knob to start my dishwasher nothing happens. I can hold the knob and my dishwasher does start to get water.
For model number GSD2600G02ww
Hello Kay, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: interlock switch, door latch kit, timer, timer knob, and pump and motor assembly. You can test the parts with a multimeter to see if they have continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 12, 2020
I ordered the timer nob wd09x10025 to replace the broken timer nob. The stem/shaft broke off at the nob and the stem/shaft is still attached to the timer.How do you take the broken stem or shaft out of the timer.
For model number GSD3300K00WW
Hello Richard,
Thank you for your question. You will need to remove the control panel to be able to access the timer behind it, then you should be able to remove the stem already attached. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeanette
February 6, 2019
What is the depth of this part? The knob on my dishwasher is cornered next to a drawer and the part sticks out too far. The drawer will not clear it. I have to remove the knob.
For model number 165D5843
Hello Jeanette, Thank you for contacting us. This knob is approximately 2 inches long and 1 inch wide. Good luck with your repair!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 5 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Old Timer Knob was Broken
Took off old timer knob and pished new knob in to it's place.
Samuel from Celebration, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced timer knob
lol it just slip on in 2 seconds...but i like to thank you for your prompt service and very informative site
jim from st augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not turn on
Basically a broken timer knob. A replacement was exactly what was needed. Perfect fit and part. Excited I don't need a new machine. Just insert new part!
Edith from LAKEVILLE, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Timer Knob
There is nothing worse than having a knob break off when using the dishwasher. The great thing is that I was able to go on the internet and found your supply outfit. I ordered the replacement and had it to install in less than 48 hours. The knob was the right one and now I use the dishwasher again TNX
James W from Huntley, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old timer knob broke
1. Disconnect power 2. Remove inner door panel 3. Remove timer assembly 4. Look up model and part # 5. Review schematics and order part 6. Replace timer assembly 7. Replace inner door panel 8. Install new knob 9. Plug in power 10. Run through washing cycle DONE!!!
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout