258169-1-M-GE-WD01X10177 -Check Valve Flapper
Part Location Diagram of WD01X10177 GE Check Valve Flapper
See part 464 in the diagram
( Grid squares measure 1x1 inch )
258169-1-S-GE-WD01X10177 -Check Valve Flapper 258169-2-S-GE-WD01X10177 -Check Valve Flapper Part Location Diagram of WD01X10177 GE Check Valve Flapper
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Check Valve Flapper WD01X10177

Rated by 2 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 7.68
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS258169
Manufacturer Part Number WD01X10177
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WD01X10177 replaces these:
AP3669275, 911987, WD01X10180, WD1X10177, WD1X10180
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher would not drain
First I looked for blockage and found none.I took the pump off and hooked power to it in my work shop and it did spin when powered up.We had broken a glass in the washer and thats when the problem started. I did find a few small pieces in the check valve assembly. It did not look bad but for cheap I ordered the part. Ran the washer and it drained on the wash but not on the final. Turned off the power.Slid the wash out where I could get to the power and not unhook the water. Turning off the power I disconnected the wires and carefully turned the power on and touched them to the pump and forced it to drain knowing that the pump worked I thought it would at least empty the water. I touched the wires to the pump and the board clicked the water drained. Hooked it back up. Ran it and has been working great since.
Read less
Other Parts Used:
Piston and Nut Assembly Check Valve Flapper
  • Murl from Hillsboro, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing poorly, leaving particles of food on top of the dishes, not draining completely, ceiling spray arm not spinning (bent up to the ceiling)
The lower spray arm unscrews. From inside the dishwahser, put a screwdriver through the tab slots and unscrew the tower from the floor. It's pretty tight for plastic.
The upper spray arm has screws on the top of the dishwasher. You must slide the dishwasher out from underneath the countertop to get to the screws. Normally that's just the two screws above the door that screw into the countertop. Pull the insulation back and unscrew the arm from the top of the dishwasher. Reverse to reinstall.
Piston and nut assembly for check valve: Inside the dishwasher at the back there are 2 screws that hold a screen down. Remove the screen. Take out the check valve and replace it. It was still functional in mine, it looked like food gunk had built up on it and impeded the check valve action.
The flapper chec is a rubber flap in the drain tube that connects to your sink drain. You have to pull the dishwasher out from under the sink to get to the end of the drain tube that connects to the dishwasher. Take the hose clamp loose and remove the drain tube from the dishwasher. Then unscrew the plastic fitting that you just took the drain tube off of. The flapper chec is there. It had turned brittle and didn't flap anymore. It is a similar setup to the rubber seal at the end of your garden hose.
Read less
Other Parts Used:
Whirlpool EveryDrop3 Refrigerator Water Filter Third Level Spray Arm Piston and Nut Assembly Lower Spray Arm with Tower Check Valve Flapper
  • Aaron from Liberty Township, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
46 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ann
September 16, 2019
My technician has replaced the body valve and draon check as well as the piston and nut assembly and the washer still has standing water in the bottom. He said that the drain soleoid and check flapper valve were okay as well as the pump. Is there any more that can be done. I had a plumber come to check it and the lines and air gap are free of clogs. What else can be done to trouble shoot the issue?
For model number GE GSD4260J00SS dishwasher
PartSelect logo
Hello Ann, thank you for inquiring. Besides the parts you have mentioned, you will want to consider the Water Inlet Valve, part number PS259368 for your model as the cause. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Check Valve Flapper
$14.61
$14.61
  In Stock
Piston and Nut Assembly
$24.34
$24.34
  In Stock
Valve Body Gasket
$16.25
$16.25
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS258169
Manufacturer Part Number: WD01X10177
Brand
Model Number
Description
Kenmore
36314231100
Dishwasher
Kenmore
36314232100
Dishwasher
Kenmore
36314234100
Dishwasher
Kenmore
36314238100
Dishwasher
Kenmore
36314239100
Dishwasher
Kenmore
36314251100
Dishwasher
Kenmore
36314252100
Dishwasher
Kenmore
36314254100
Dishwasher
Kenmore
36314259100
Dishwasher
Kenmore
36314582100
Dishwasher
Kenmore
36314584100
Dishwasher
Kenmore
36314587100
Dishwasher
Kenmore
36314589100
Dishwasher
Kenmore
36314772100
Dishwasher
Kenmore
36314773100
Dishwasher
Kenmore
36314774100
Dishwasher
Kenmore
36314779100
Dishwasher
Kenmore
36315121100
Dishwasher
Kenmore
36315129100
Dishwasher
Kenmore
36315212100
Dishwasher
Kenmore
36315219100
Dishwasher
Kenmore
36315222100
Dishwasher
Kenmore
36315229100
Dishwasher
Kenmore
36315312100
Dishwasher
Kenmore
36315314100
Dishwasher
Kenmore
36315319100
Dishwasher
Kenmore
36315322100
Dishwasher
Kenmore
36315324100
Dishwasher
Kenmore
36315329100
Dishwasher
Kenmore
36316121100
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Check Valve Flapper
$ 7.68
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.