Door Gasket WB4K1

Hi Janet, Thank you for your question. We actually had another customer ask the same question. Here is how you install this part: "To replace the door gasket you will need to remove the door from the oven as the gasket is in a lip or grove that is between the inner and outer door panels. To remove the oven door you will need to open the door to the broil stop and place your hands on either side of the door. Lift the door off the hinges. Do not try to lift the door with the handle or you will break the handle. Mark the location of the ends of the gasket so you can put the new gasket in the same location as the old. Remove the screws from the oven door and lift the inner panel off the door. You can now replace the door gasket. " Good luck with your repair.

Hello Valerie, thank you for contacting us. We have a video showing how to replace the oven door gasket. You can follow the link below, hope this helps! https://www.youtube.com/watch?v=dog7d1nWgaQ

Hi Richard, Thank you for the question, the inner door should have screws that hold it in place. You will need to disassemble the door to expose the screws to install the gasket. Hope this helps!

Hi Bob, thank you for your question. Unfortunately the manufacturer has not provided exact specifications for this part. However we do have the part photographed on a 1 inch grid background. This part is approximately 71" inches long and 1/2" wide. I hope that helps. Good luck with your repair.

Hello Elise, Thank you for contacting us. This does not come with pins. The inner door should have pins to hold this in place. Have a great day!

Hi Robert, Thank you for the question, the inner door should have screws that hold it in place. You will need to disassemble the door to expose the screws to install the gasket. Hope this helps!

Hello Cathy, Thank you for your inquiry. We do not have a video for this exact part number, but we were able to find the following instructions for you. 1. Remove door lifting off of hinges. 2. Remove 6 screws from door frame and remove frame, handle and outer glass. DOOR GASKET REPLACEMENT (Note gap in original gasket at bottom of door) 3. Remove both middle crystals. 4. Remove four screws from insulation retainer at middle crystal opening in insulation retainer. 5. Remove insulation retainer. 6. Remove 4 screws securing inner door liner to inner door panel. 7. Replace gasket leaving same gap at bottom as original. Hope this helps!

Hello Jim and thanks for writing. The inner door should have screws that hold it in place. You will need to disassemble the door to expose the screws to install the gasket. We hope this helps. Please contact us anytime.

Hello Richard, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS242058. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Chandra, thank you for getting in touch. Based on our research, if you experience an unexpected amount of heat escaping from around the door, most likely your gasket is cracked or torn. In this case, you will need to replace your gasket, part number PS250264. We hope this solves your problem!