Bake Element - 220V 2300W WB44X5082 | Official GE Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

https://partselectcom.azureedge.net/Schematics/GE/00006152i01.gif
See part 650 in the diagram
https://partselectcom.azureedge.net/Schematics/GE/00006152i01.gif

Bake Element - 220V 2300W

41 Reviews
Your Price
$34.32

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS249466

Manufacturer Part Number WB44X5082

Manufactured by GE

This bake element goes in the bottom of your range and is 220 volts and 2300 watts. This closed hinged style element with screw-in terminals measures at 15-1/4 inches long and 18-1/4 inches wide. The bottom bake element provides heat for baking. Tools you will need for this repair include pliers, screwdrivers, and an adjustable wrench. Before you begin this installation, remember to shut off the house circuit breaker or unplug your range. For safety purposes we also recommend wearing work gloves.

This part works with the following brands: General Electric, Hotpoint, Kenmore

This part works with the following products: Range, Microwave Oven Combo, Wall Oven

This part fixes the following symptoms: Little to no heat when baking | Element will not heat | Oven not heating evenly | Oven is too hot

Questions & Answers

Most Helpful

Question:

I am replacing the bake element #wb44x5061 into my GE oven. I didn't pay attention when taking the old element out, but i have three wires in the back of the oven. Two of them are black and one is yellow. Which wires go on which element contact? Thank you

Jo Ann
October 13, 2017
Answer:

Hi Jo Ann, Thank you for your inquiry. There is a video on our website that you can reference on how to install the bake element. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!

6 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

While using my oven a fire suddenly started--big fire (about scared me to death) on the heating element. Turned off the oven, threw salt on fire. Now that's cooled and I'm ready to clean it up, I find that the heating element had burned completely through. Before I pay for a new element, how likely is it that there is more electrical/internal damage? Or is it likely just in need of a new element? Thank you.

Paula for model number J BP23G V2WH
May 4, 2018
Answer:

Hi Paula, Thank you for the question. In most cases the element will just need to be replaced. In rare cases the control board has shorted but replacing the element shoudl fix the issue. Hope this helps!

2 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

The bottom heating element needs to be replaced in my GE stove (jbs03gs1ad). How do i find the part number for that element?

Karen for model number jbso3gs1ad
January 3, 2018
Answer:

Hi Karen, Thank you for your question. To access your model number online, you will only need to enter JBS03GS1. The part number for the bake element listed under your model number is PS249466. I hope this helps. Thank you and have a great day!

2 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

I need top & bottom heating elements. What are the latest part numbers because this oven was purchased in 1986. I also need to replace the large (8”) eye on the stove top. If you could give me that part number too.Thanks, steve hall

Steve Hall for model number JMC27GJ
January 25, 2018
Answer:

Hi Steve, Thank you for your question. We do have the parts available for you. The part number for the 8 inch surface burner element is PS244046. The part number for the broil element is PS249386. The part number for the bake element is PS249466. I hope this helps. Thank you and have a great day!

2 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

Did not see my model listed and i need a bake (lower) element for the oven

Richard for model number JBP75W W1WH
August 8, 2018
Answer:

Hi Richard, Thank you for your question. We found your model number listed as JBP75WW1. The part number listed under your model number for the bake element is PS249466. I hope this helps. Thank you and have a great day!

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

Need bake element replacement part for above GE model #.Thanks

Mel for model number JBP26WV2WW
21 days ago
Answer:

Hi Mel, Thank you for your question. The part number listed under your model number for the bake element is PS249466. I hope this helps. Thank you and have a great day!

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

Don't see screws to remove/install oven burner

larry for model number jbp90ww1ww
August 31, 2017
Answer:

Hello Larry, thank you for contacting us. There is a plate on the end of that element, there are 2 screws holding that in, you can just remove those and carefully pull it out with the wires. Good luck with the repair!

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

I am looking for a bottom element for my oven and I found one that looks like it on your website but I do not know if it will work in my oven. Can you please tell me whether it would or not?

Haley for model number JBS03C2WH
April 1, 2018
Answer:

Hello Haley, Thanks for your question. The bake element part number is PS249238 for your model. I hope this helps.

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

My heating oven burned out

Lillian for model number JBS260V2
December 7, 2017
Answer:

Hi Lillian, Thank you for your question. This would be the correct element for your appliance. Good luck with your repair.

Was this helpful?
Show Answer
Hide Answer

Most Recent

Question:

Trying to locate the correct element for this self cleaning double oven. I need the bake element for the upper oven. Full model number could be GE model:Jkp27ba1bb or jkp27ba2bb or jkp27ba3bb i have been given the model number wb44k5013 by GE but the photos do not resemble the original element. any assistance would be greatly appreciated. thanks

Dennis for model number jkp27
9 days ago
Answer:

Hello Dennis, Thank you for the question. In order to locate the correct part we will need the model number off of the appliance. Please see below for a link to help locate the model number on the appliance. The model numbers provided have different bake elements. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you! https://www.partselect.com/Model-Number-Locator+8+repair.htm

Was this helpful?
Show Answer
Hide Answer
Question:

Oven will not preheat or come on when set on a temperature. Is it the baking element or the ignition system?

Earlene
November 7, 2018
Answer:

Hi Earlene, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor checks out fine, you will need to check the electronic control board, the elements in the oven and the ignition system. I hope this helps. Thank you and have a great day!

Was this helpful?
Show Answer
Hide Answer
Question:

My bake element remained heating when I turned the oven off

Corky for model number JBP26Wv2ww
March 27, 2018
Answer:

Hi Corky, Thank you for the question. This sounds like a defective Electronic Clock Control, PartSelect Number: PS239445. This board controls the ovens operations. Hope this helps!

Was this helpful?
Show Answer
Hide Answer
Question:

So i’m back. Last week you pointed me in the correct direction of replacing my oven temp sensor it worked!!! however with this repair we noticed the bottom bake element is not working. we have a replacement one and installed it. (screw in wires not like the video) two black and one yellow. 99% it is correctly done. turned on the oven and again the element did not heat. any suggestions?

Erika I for model number JBP26JS1AD
February 12, 2018
Answer:

Hi Erika, Thank you for your question. If the bake element is not working, I would check the wiring between the oven sensor and the electronic control board with a multimeter as well as the wiring connected to the bake element terminal to see if there are any issues. If everything checks out,the last thing I would do is check the electronic control board to see if it is working correctly. I hope this helps. Thank you and have a great day!

Was this helpful?
Show Answer
Hide Answer
Question:

I am looking for a bake element for this GE range. Can you help?

Gayle for model number JSP28G0J2
January 30, 2018
Answer:

Hello Gayle, Thanks for your question. The bake element compatible with your model is part number PS249466. I hope this helps.

Was this helpful?
Show Answer
Hide Answer
Question:

Heat element in my oven burnt out. What is the correct part i will need.

Tanya for model number Jbs03v5wh
January 16, 2018
Answer:

Hi Tanya, Thank you for your question. The part number for the bake element listed under your model number is PS249344 and the part number for the broil element listed under your model number is PS249344. I hope this helps. Thank you and have a great day!

Was this helpful?
Show Answer
Hide Answer
Question:

I am look for the compatible heating element for gs model: Jbp24g0k2ad. Can you recommend the replacement and part number? Thank you, paul

Paul for model number JBP24G0K2AD
January 15, 2018
Answer:

Hello Paul, Thank you for your inquiry. We show that the updated part number would be WB44X5082. Hope this helps!

Was this helpful?
Show Answer
Hide Answer
Question:

Old stove! Can I get a bake element?

Kelly for model number jsp27001
January 9, 2018
Answer:

Hello Kelly, Thank you for contacting us. I have researched the model you have provided and have found a similar model number that may have the same element. The part is PartSelect Number: PS249466. There is a picture online if you wish to take a look and verify if this is the element you need.Hope this helps!

Was this helpful?
Show Answer
Hide Answer
Question:

What oven heating element would be used for this model.

Connie for model number JBS16GV2
January 5, 2018
Answer:

Hello Connie, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS249411 for the top broil element and the bottom bake element is Part Number: PS249466. Good luck with your repair!

Related Parts: Broil Element
Was this helpful?
Show Answer
Hide Answer

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 219 reviews What's this?
1-15 of 219
508 of 532 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Wilbur from Taylorville, IL
Element quit working
Unhooked electrical wiring from unit and rehooked new unit to electrical wiring.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

442 of 456 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Customer:
Michael from Saint Paris, OH
Bottom heating element went out
This repair took between 15 and 30 minutes BUT ONLY because my 10 year old son did the repair. He couldn't wait for his father to come home from work. His only complaint was the tight fit to reach the back of the oven (he wanted to take the oven door off but I said no). He removed the 2 screws that held the element in place and then pulled it from the oven until he could remove the screws that held the wires in place. He was concerned that a little of the insulation came out with the wires, but this was no issue. The new element hooked right up (we figured out that we had to use the 2 new screws for the wires because the old ones did not fit very well). We used the same 'old' screws to attach the element back to the oven. Plugged the oven back in and it works fine. My son was so proud and I didn't have to help any more than shining a flashlight for him.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

311 of 385 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Customer:
Phyllis from Fisk, MO
Oven heating element was broken.
The heating element in the lower oven of my 18 year-old GE double oven broke into two pieces and would not heat. Because of the age of the oven, a replacement part was unavailable through GE. I came across PartSelect.com through an Internet search and ordered the part online. Total cost was $33.50, counting s/h. FedEx delivered the new element less than 48 hours after I placed the order online.

IMPORTANT: FLIP the BREAKER to stop electricity from going to the oven. Replacing the heating element is a two step process: 1. Remove the old element. 2. Install the new element in its place. (NOTE: This job is much simpler if you lift and remove the oven door BEFORE you begin. NOTE also: There are no slots in the screws, so you must use a small socket wrench--not a screwdriver-- to remove the screws.) STEP 1: Two screws go through the small metal plate attached to the element prongs. These screws hold the element to the back oven wall. Remove the screws, then pull the element forward a few inches to gain access to two screws which hold the element prongs to wires that come through the back oven wall. (One wire and one screw for each of the two prongs.) Remove the two screws. Remove and discard the old element. STEP 2: Install the new element by doing Step 1 in reverse. Oven is now repaired! (It took more time to type these instruction than it took to repair the oven.)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

135 of 201 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Customer:
Brittany from Cayce, SC
The oven element had broken in half and was sparking
I am not a handy person so I was really nervous about doing this. I first unplugged the oven just to be on the safe side. Then I removed the two screws that hold the element in place. Next I pulled the element forward and disconnected the two wires. After that I simply reconnected the two wires to the new element, pushed it back in and put the screws in. Piece of cake!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

101 of 165 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Customer:
Liz from Williamson, NY
Oven would no longer heat. Only broiler worked
First I removed the 2 screws that held the bake element in place. Then I pulled the element out and disconnected the two wires. Reconnected the two wires to the new element and pushed it back in place and installed the unit again with the 2 screws. Turned the oven on and it heated up like it should.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31 of 37 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Customer:
James from Tazewell, VA
Bake element bent down to bottom of oven (ready to break)
1) turned off breaker to oven
2) removed oven racks
3) removed screws holding old element
4) pulled out element far enough to remove 2 wires attached to old element
5) noted colors, left white, right black
6) attached new element to wires
7) attached new element to oven
8) put back oven racks
9) turn breaker back on
10) test oven
done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

23 of 25 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Customer:
Becky from Norman, OK
The bottom element had broken apart and needed to be replaced
The only reason I mentioned "a bit difficult" is that it is very important to unplug the unit first. I didn't want to say easy because I didn't want someone just jumping right in, (you do end up handling raw wires).
First I removed the two screws that were holding in the element to the back wall of the oven, then pulled out the old element slightly until you see where the wires are attached to the end of the element. I made note (I don't know if this is neccessary) which wire came off which screwset so I could put the new one in the same way. Took out the old element and attached the new one to the two screwsets on the ends of the element and then reinserted that part in in the back wall of the oven and attached plate that holds it in place. It was for my mother and she now thinks I'm a genius! Don't let anyone take a picture of you of you from behind because you definitely have to put your head in the oven. I believe the door is removable that may make it easier to get to it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 19 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Customer:
John from Lafayette, LA
Bake element burnt up
Turned off breaker to stove.Used nut driver to remove the holding plate from the back ove the oven. Their was between 4 to 6 inch of slack on the wire. Used the nut driver and removed the red wire from the right side of the old element, and then removed the white wire from the left side of the element. Replaced the cap head screws that required a nut driver, with the slotted screws that came with the new element, replaced the white wire(left) the red wire(right), end reattached the holding plate to the back of the oven and done!
There are stand offs on the bottom of the element, so you can't get it confused on where the wires go, but take care that the wires do not slip back in the element "hole" or you will have to "fish" them back out.

Brought the element up slowly to 500 degrees, to burn off any residue on the element. Smelled a chemical smell for the first 5-10 seconds of the "burn in", then no smell.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 18 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Customer:
Douglas from Derry, NH
The bake element would not heat up.
This repair took much longer than it should have.
When I noticed the oven would not heat in bake mode, I suspected the element was bad. Going on the forum, I found that I needed to ohm out the element to be sure, so from inside the oven, I removed the two screws holding the element into the stove, pulled out the element a bit and removed the screws from each contact, ohmed it out and found no continuity. I ordered a new bake element which arrived in a couple of days.
I installed the new element by connecting the wires back to each terminal end. It still didn't work and not only that, the broil element didn't work now either.
I inquired again on the forum and found that the suspect might be the control module that controls both bake and broil elements. The part was $250.
Not wanting to spend that on a 10 year old stove, I ordered a new stove at Sears that was on sale.
I sent the bake element back and waited for my stove to arrive.
Sears called a few days later that my stove was ready for pickup so in preparation, I pulled my old stove out from the wall and began to disconnect the pigtail to use on the new one. It was then I noticed a wire dangling that seemed to go to one side of the bake element. When I pulled out the bake element initially and disconnected the wires, I didn't notice that one terminal had TWO wires going to it and one had a single wire connected. It was a bit dark inside the stove when I initially took the screw off of each terminal and I never noticed the second wire on the left one. I installed the old bake element, knowing it may not work but just to see if the broil now worked and it did!
So I ordered another bake element and installed it connecting two wires to the left terminal and one to the right terminal, reattached it to the back of the oven and IT WORKS!!

I cancelled my new stove at Sears which saved me about $500. Just a $26.00 part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 19 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Customer:
Ward from Gilmer, TX
Element burned into.
First I removed the two screws that held the element in place. I pulled the element out about 2-3 inches and then removed the two screws that fastened to the ends of the element. Was careful to keep the same wires separate in order to fasten the new element back to the same two wires. When fastening the new element ends back to the wires, care must be taken to not bend the ends of the element when tightening the small screws to the ends. Everything went real good and am most pleased with the very fast service portrayed by Parts Select. They are a class act company and rate very high in customer satisfaction!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 13 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Customer:
Laura from Downingtown, PA
Our 12 year old oven bake element sparked and died on us
So easy, first I turned off the main switch to the electric. Unscrewed old bake element and screwed in the new one. Worked like a charm. We also bought from Part Select new burners and drip pans. Can't believe how good it looks. I placed my order on a Sunday and received it on Tuesday!! 2 days. Awesome website...Have told everyone about it..THANK YOU PART SELECT..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 12 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Customer:
Michael from Brookfield, CT
The lower bake element broke
Easiest repair I ever did. Killed the circuit breaker, then removed the oven door, loosened the 2 hex nuts with a nut driver, pulled the old element out a few inches, loosened the nuts holding the wire to the element. I then put the new element in place, connected the wires to the element, pushed it back in to the insulation, and then replaced the nuts on the cover piece. Put the circuit breaker back on, and done!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 11 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Shalgit from North Potomac, MD
2' crack in the baking element near the plug
I have a 22 year old GE double oven with a range top that I can't live without. I do alot of cooking, baking, and my share of entertaining. To replace this oven I would have to sacrifice having 2 ovens...or remodel my kitchen and reposition their location. So when something goes wrong with this oven I cringe. It needs to keep ticking for another 10 years. A friend recommended PartSelect. looked on line and found the part resembling mine. I called just to confirm the part was correct, and found out it was not. I looked up the part number the said was correct but the shape was wrong. I order it anyhow and when it arrived it was what I needed. The picture on the website was inconsistant with the part number. So I'm really glad I called and spoke to a rep. The part arrived in 4 days and the next day I installed it, needing only one tool. Doing it myself saved me a few hundred dollars and my oven works great again. And their price was lower than a local parts dealer. I added PartSelect to my favorite list for future needs! Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 12 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
Carol from Germantown, MD
Oven lower baking unit element broke.
First turned off the circuit breaker. The two screws holding the element in place were removed. Next the element was pulled out about 3 inches. Wires were disconnected. Old element was removed. Wires were then attached to the new replacement element. The element was then re-attached to back of oven, using the two screws. Circuit breaker turned to on. About 5 minutes. Took longer to change the flashlight batteries!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 8 people found these instructions helpful
Parts Used:
  • Bake Element - 220V 2300W
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Customer:
Mrs. Edith from Seaford, DE
Bake element burst & went on fire in oven
Moved stove from wall, unplug the stove from the wall outlet, remove the oven racks, unscrew the plate against the oven wall supporting the element with a small adjustable wrench, pull out the element slowly without tearing the insulation & stretching the two wires, unscrew with a phillips screwdriver each wire with care, as a precautionary measurement: do not make contact with the other wire and any other part of the stove, even though it was still unpluged. Install the new element in reverse procedure...turn on Bake Element on low temperature..when it glows when hot..ready to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 219
Customer Reviews
Average Rating:
41 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    36
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Sort by:

Model Cross Reference

This part works with the following models:

PartSelect Number: PS249466
Manufacturer Part Number: WB44X5082
Brand
Model Number
Description
Kenmore
202.33
Range - Kenmore Range/Stove/Oven Model 202.33 (20233, 202 33) Parts
Kenmore
20221
Range - Kenmore Range/Stove/Oven Model 20221 (1988) (20221(1988)) Parts
Kenmore
20231
Range - Kenmore Range/Stove/Oven Model 20231(1988) Parts
Kenmore
20232
Range - Kenmore Range/Stove/Oven Model 20232(1988) Parts
Kenmore
3639308810
Range
Kenmore
3639378810
Range
Kenmore
3639378880
Range
Kenmore
3639858810
Range
Kenmore
3639858911
Range
Kenmore
3639868810
Range
Kenmore
3639878810
Microwave Oven Combo
Kenmore
3639878911
Microwave Oven Combo
Kenmore
3639888810
Microwave Oven Combo
Hotpoint
9878810
Range - Hotpoint Range/Stove/Oven Model 9878810 Parts
Hotpoint
9888810
Range - Hotpoint Range/Stove/Oven Model 9888810 Parts
Kenmore
99121-8
Range - Kenmore Range/Stove/Oven Model 99121-8(1988) (991218(1988), 99121 8(1988)) Parts
Kenmore
99138
Range - Kenmore Range/Stove/Oven Model 99138 (1988) (99138(1988)) Parts
Kenmore
99141
Range - Kenmore Range/Stove/Oven Model 99141 (1988) (99141(1988)) Parts
Kenmore
99148
Range - Kenmore Range/Stove/Oven Model 99148 (1988) (99148(1988)) Parts
Kenmore
99151
Range - Kenmore Range/Stove/Oven Model 99151 (1988) (99151(1988)) Parts
Kenmore
99158
Range - Kenmore Range/Stove/Oven Model 99158 (1988) (99158(1988)) Parts
Kenmore
99211
Range - Kenmore Range/Stove/Oven Model 99211 (1988) (99211(1988)) Parts
Kenmore
99221
Range - Kenmore Range/Stove/Oven Model 99221 (1988) (99221(1988)) Parts
Kenmore
99228
Range - Kenmore Range/Stove/Oven Model 99228 (1988) (99228(1988)) Parts
Kenmore
99241
Range - Kenmore Range/Stove/Oven Model 99241 (1988) (99241(1988)) Parts
Kenmore
99248
Range - Kenmore Range/Stove/Oven Model 99248 (1988) (99248(1988)) Parts
Kenmore
99258
Range - Kenmore Range/Stove/Oven Model 99258 (1988) (99258(1988)) Parts
Kenmore
99351
Range - Kenmore Range/Stove/Oven Model 99351 (1988) (99351(1988)) Parts
General Electric
BP76GS1
Range - GE Range/Stove/Oven Model BP76GS1 Parts
General Electric
J300*R1
Range - GE Range/Stove/Oven Model J300*R1 Parts