GE/GE_Thumb/00108750i03.gif
See part 251 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element - Push On Terminals - 240V

★★★★★
★★★★★
90 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS249285
Manufacturer Part Number WB44T10010
Manufactured by GE
Product Description

Bake Element - Push On Terminals - 240V Specifications

This is an OEM bottom bake element for your oven. Make sure to wait until your oven is cool before replacing this part, and disconnect power to the oven. In order to replace this part, you will need to pull out the oven and open up the back panel to disconnect the bake element wires and install the new ones.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore.
Part# WB44T10010 replaces these:
AP2030996, 770549, WB44T10010
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

40 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Esther
September 14, 2017
This model does not come up when i search. I need a bottom element for my spectra GE cooktop stove. I want to be sure to order the correct one. Please indicate which one works with my stove. Thank you. I am 77 and i need help.
For model number JBP67BOD1WH
Hi Esther, Thank you for your inquiry. GE sometimes removes the zeros from their model numbers so you would find the parts under JBP67BD1WH. The part number for the bake element from your appliance is PS249285. I hope this helps. Thank you and have a great day!

37 people found this helpful.

Was this helpful?
Thank you for voting!
Landon
March 17, 2018
Do you have a video available showing how to install this bake element part? If so, please let me know how to access it?
For model number JBP68WDWW
Hello Iandon, Thanks for your question. We do not have a video for installing this part, so I will write out the instructions for installation. Unplug the oven. Remove the rear access panel by unscrewing any screws on the back panel. Use pliers to remove the wires from the bake element terminals. Go to the front of the range and remove the oven racks. You may want to remove the oven door to make accessing the element easier as well. Use a nutdriver to remove the screws and remove the bake element. Bring the new bake element to the oven and install it with the screws, put the door back into place, replace the racks, then wire up the element in the back and replace the access panel. I hope this helps.

11 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
November 6, 2017
My bake element just died and actually a piece broke off and is laying on the bottom of my stove. What is the correct part # for my model. I need it asap
For model number JBP24BHCT
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS249285. Good luck with this repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
November 5, 2017
When you turn the oven on, the top element lights up and the bottom element does not. The light on the top is flashing preheated, but doesn't stay consistent like it was before and only cooks like its on broil. Should I replace the bottom element to fix the issue or should I check into wiring and the thermostat, or all of the above?
For model number JBP76GS3WW
Hi Robert, Thank you for the question. If it is just the Bottom Bake Element not working I suggest replacing the Bake Element. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Thomas
February 7, 2018
I am looking for a replacement wire that runs between the terminal and the bake element. The wire has a ring connector on the terminal block and a spade connector on the bake element. The original wire is 16 awg. Thanks.
For model number MAYTAG C?E8600ACW Range
Hi Thomas, Thank you for the question. Very sorry but we do not list the wiring for the element. I suggest contacting the manufacture directly to see if the wiring is available. If they can provide a part number you can contact us back to see if it is something we carry. Hope to hear from you!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Linda S.
January 4, 2019
My bottom heating element burned like a fuse on a firecracker. Went to shut the oven off while i was cooking and when i pushed the off button, it sparked. So does mean i am going to have a bigger problem than just replacing the heating element?
For model number Jbs55dm2bb
Hello Linda, thank you for your question. No, the issue is probably just the element itself. When these parts have a crack or burn in them and arch, they can burn like a firecracker. Replace the element and you should be just fine! I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Patrick
August 26, 2017
GE stove......when heating up the oven it announces that it is at the correct heat, such as 350, but is actually much lower. the digital readout says 350 but two thermometers show that it is about 200 degrees. i just received the new sensor (and a new light bulb) that i ordered from you last week. i have them installed and have tested the oven but find the same issue. i don't really want to change out the stove because the exterior is in great shape, not even a scratch on the top surface. does this sound like the element is failing?
For model number JBP67BH2CT
Hi Patrick, Thank you for your question. Yes it does most likely sound like it is your bake element that you will need to replace however you may have to look into your control board. You can test your bake element with a multi-meter to test if it is not working correctly. I would also suggest taking a look at the gasket around your door, just to make sure that it's not worn down. If it has been worn, that could be the reason heat will not stay inside of your oven. Good luck with your repair. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Anthony
November 1, 2017
Is the part number for this model wb44t10010
For model number jbs55bk2bb
Hi Anthony, Thank you for your question. Yes, this is the correct part for your appliance. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Delores Hagerman
October 5, 2017
I am looking at the pictures of bottom oven element on your page for my GE electric stove. Mine does not heat up. I need the measurement of the one i am looking at. The measurement of mine is 17 3/4 inch wide, 12 inch long, 3 1/4 inch apart push in termimals. See if you have one with that measurement. Thank you
For model number J2B918BEK5BB
Hi Delores, Thank you for your inquiry. The part number for the correct bake element for model number J2B918BEK5BB is PS249238. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
MIKE
November 11, 2017
How do i remove the bottom heating element of my GE elec. Stove ???
Hi Mike, Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 106 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Bake Element burned out, bunt like a sparkler.
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and there is not much room in which to work. After having removed the wire connectors one slipped from my fingers and went back in the small opening in the back of the oven where the element is inserted. It took some time to fish out the wire. Not wanting to slide out the range I used some surgical forcepts I happen to have grab the wire ( handy to clip wires or compontents in place for some delicate repairs). Its all blind and the opening is very small plus the insulation must be pushed back to gain access. Anyway I managed to grab the wire, attached both wires to the element, replaced the plate and screws holding the element in place, all finished. Worked great. Other ranges I have owned provided a socket to plug in the element, I guess the bottom line gets in the way of quality.. Being 60 years old the worst part of this job is the getting down on my knees to do the work and getting back up again.
  • Brad from Bedford, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
332 of 353 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element fell apart
Cut the Power! pull out stove remove the 4 screws in the back, disconnect the two wires from the element.Open oven door, remove racks and remove 2 screws holding the element in place. Replace element and the 2 retaining screws, replace racks.On the back of the oven connect the two wires and replace cover. Slide back in place and turn on the power. Done =)
  • Ronald from Citrus Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
70 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element burned up and broke into pieces
First, we turned off the electricity for the whole house, since we didn't want to pull the unit away from the wall and possibly damage our new floors. We then used a socket wrench to remove the 2 nuts holding in the broken element. After that, we pulled out the old element, and this is where the difficulty came into play. The wires for the element stayed inside the back of the oven, and nothing we did could make them come out. We tried for a long time to get the wires to come back out into the oven, but our fingers were not long enough, and nothing we inserted into the space helped the situation.

Since we had turned the electricity off and still were reluctant to move the oven ourselves, we actually decided to call in a repair person (cost: $90). What he did, though was really simple:

He pulled the oven out from the wall. Used a screwdriver to open the back panel of the oven and was able to pull out the wires. Then, he inserted the new element, hooked it up to the wires, and closed back up the back panel. Then, he moved the oven back into place.

The repair person did this in all of 5 minutes, so if my husband and I had thought about the back panel, we would have easily done it ourselves.
  • Lisa from San Jose, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
59 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element burned up
I started by lifting the front of the stove and slipping a towel under it so it would slide easier and not scratch the floor. The next step was to unplug the stove, after that, I removed the shelves. The next step was to remove the cover plate on the b ack to expose the connection. I removed the old element by pulling the to slide-on connections and the two mounting screws. At this point I took the time to clean the oven since the element was not in the way. To install the new element I did the opposite of th removal process.
  • Teri from Simpsonville, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
28 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element cracked and shorted out
First, I made sure the power was turned off at the breaker box so I didn't electrocute myself. Then, I took out the 2 screws that hold the element in place, then pulled it out and unplugged the wires.
I plugged the wires onto the new element, and replaced the screws. My daughter could have done this....
  • mark from severna park, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
25 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven won't get hot, would preheat only -element don't even get hot- only the brioil element got hot.
Repair: unscrewed the back panel- 2 screw and the sensor and bake element from the inside had 2 screws each. Just stuck them through their old hole from inside to the outside, pushed plug back together. Then screwed back into place, screwed back plate back on. Plugged stove in, turned on the oven and within 2 seconds the bake element was blood red and temp. was up to 350 in less then 10 min. Come to find out only needed the oven sensor -$10.00part but I already ordered the bake element so I went a head and replaced it - cost $50.00. Have a great oven again for less then $70.00repair.
Other Parts Used:
Temperature Sensor
  • Tammy from Emmitsburg, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element in bottom of stove caught fire and burned!
Two screws on the inside to free element. 4 screws in the back to remove a plate. unhooked element connectors. Remove element from inside replace with new one. Too Easy.
  • patrick from MAIDEN, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
Real happy on how fast the new part came.
1.Pulled oven away from wall and unplugged the unit & removed baking racks.
2.Removed the back wire cover behind the oven (3 screws).
3.Used the nutdriver to carefully remove the two holding screws inside the oven. Then I pulled the element towards me to expose the wires.
4. Using the pliers, I disconnected the element from the wires.
5. Using my son's help, I had him push the new element leads into the holes in the back while I connected the leads to the wires behind the oven.
6. Replace the two element retaining screws inside the oven.
7. Replaced the rear panel with the 3 screws.
8. Put the oven back in place and plugged it in. The oven worked perfectly!
  • Douglas from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
19 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element went bad
I turned off the breaker for the oven. I used a electric drill with a 1/4 in socket to unscrew the two bolts inside the bottom of the oven. Then I pulled
out the heating element and slid off one connector and attached it to the new element. Then I slid off the other connector and attached it to the new element. Then I screwed the bolts back. I turned the breaker back on and it worked great.
  • Denise from Moyock, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
16 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnt out element
Turn off circuit breaker.
Lockout (LOTO) circuit breaker.
Pull stove away from wall to access the rear of range.
Remove seven (7) screws from rear cover with nutdriver / screwdriver.
Carefully, disconnect stake-on terminals (wires) from element (may need to use needle nose pliers).
Open oven, remove racks.
Remove two (2) screws holding element in place with nutdriver.
Remove old broken element.
Insert new element. Fasten with screws previously removed. Close oven door. Go to rear of unit.
Reconnect wires to element. Make sure insulation seals around the element.
Inspect for any other damage; repair as may be required.
Replace cover panel and fasten with the seven screws previously removed.

Does not hurt to vacuum and clean the area stove, too.
Push stove back into position.
Remove LOTO and turn on circuit breaker (power)

Turn oven on to highest temp to bake off any contaminates on element. Turn OFF. Let cool. Replace racks a/r. Close oven door.

Invite the pretty girl next door to come over to bake something.... OK, this part is optional.
  • Ed from Lee, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
90 Reviews
4.8
Filter By Rating:
  • 5 Stars
    82
  • 4 Stars
    6
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS249285
Manufacturer Part Number: WB44T10010
Brand
Model Number
Description
Kenmore
91192090300
Range
Kenmore
91192090301
Range
Kenmore
91192091300
Range
Kenmore
91192091301
Range
Kenmore
91192401990
Range
Kenmore
91192401991
Range
Kenmore
91192401992
Range
Kenmore
91192408990
Range
Kenmore
91192408991
Range
Kenmore
91192408992
Range
Kenmore
91192481990
Range
Kenmore
91192481991
Range
Kenmore
91192481992
Range
Kenmore
91192488990
Range
Kenmore
91192488991
Range
Kenmore
91192488992
Range
Kenmore
91192502990
Range
Kenmore
91192502991
Range
Kenmore
91192502992
Range
Kenmore
9119250799
Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
Kenmore
91192507990
Range
Kenmore
91192507991
Range
Kenmore
91192507992
Range
Kenmore
91192712020
Range
Kenmore
91192714020
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91192814300
Range
Kenmore
91192814301
Range
Kenmore
91193090300
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service