This bake element is used in ranges and located at the bottom of the oven. The bake element supplies heat for baking. If your symptoms include: your oven is not heating evenly, not starting, or the heating is not consistent, then replacing the element can be the solution. Remove two retaining screws, make sure to disconnect the two connecters at each end of the element, and replace with the new one. Before starting this replacement, make sure the range is unplugged from the power source or shut off from the house circuit breaker. The tool needed is a Phillips screwdriver.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John J - September 10, 2024
Verified Purchase
Happy Customer
My oven is ancient! It's a special 27" drop-in model. When it stopped baking, I had a couple of choices. I could buy the only replacement model available at a cost of about $2,000 or I could remodel my kitchen to make room for a normal-sized oven. By chance I hit the broiler button and actually felt heat from the top element, so I then figured, maybe I could just replace the bottom element and the bake option would work. Parts Select had the right element to fit this 30+ year old oven. It was a perfect match to the old element and easy to install. I am certainly a happy customer.
★★★★★
★★★★★
Mark E - April 24, 2024
Verified Purchase
The right part.
Arrived quickly, was the correct part, unlike what I sourced from a local dealer.
★★★★★
★★★★★
Brandon E - December 13, 2023
Verified Purchase
Very easy to repair.
The part came fast, and I replaced the old element in about 10 minutes.
★★★★★
★★★★★
Cathleen H - January 28, 2023
Verified Purchase
Easy ordering, fast delivery and simple to replace
The part came the next day and I was easily able to replace the bake element in my GE oven that's over 20 years old. I definitely would order from this company again.
★★★★★
★★★★★
Kent V - January 3, 2023
Verified Purchase
Heat Element
Work like it should!
★★★★★
★★★★★
Larry B - December 16, 2022
Verified Purchase
Easy Repair, part working fine
Exact fit working fine
★★★★★
★★★★★
Deniece S - December 9, 2022
Verified Purchase
Fast fix, great part
Our lower baking element in our oven went out right before Thanksgiving so I ordered this part and it got here just in time to make dinner. It works great and was lso an easy install.
★★★★★
★★★★★
Chris D - December 2, 2022
Verified Purchase
Good Part, does what it should
Install was easy
★★★★★
★★★★★
Lawrence D - October 13, 2022
Verified Purchase
Exact replacement
The part arrived in a damaged carton which had obviously been opened and then resealed with tape. However, the part itself did not appear to be damaged.
I have replaced oven heating elements before and this one went quickly and smoothly. The part was an exact fit and has worked perfectly since installation.
★★★★★
★★★★★
John O - October 2, 2022
Verified Purchase
easy repair - part worked just as expected
Fast delivery - operators were friendly and wonderful to work with.
Thank You so much - GREAT !!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 40 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven bake element blew out
Shut off the power from the fuse box. Removed p the two screws and plate that attach the element to the wires and back of oven. Installed the replacement element by attaching the wires and reinserting the two screws. Restored power and tested the new element by preheating the oven at 350 degrees and letting it heat for 15 minutes. Works
... Read more like a charm!
Read less
Michael from Indianapolis, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
New element had blade connectors (male).
Drilled small holes in blades to accept existing machine screws from oven wires.
James from MARIETTA, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
My husband (a retired tool & die maker) easily removed the old bake element after first turning off the circuit. He cleaned up the burned salt that we had used to try to put the "fire" out but finally just shut down the circuit. Then just as easily istalled the new element. Thanks to your quick service, we were only without the use of
... Read more the oven for a day and a half!
Read less
Cynthia from Pierson, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven element burned out
Truned off the power took out the two screws holding the old element disconnect the power leads and put in the new element. Was great to recieve the new element in one day, the day before Xmas.
STEVEN from EXTON, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced bake element
Needed to drill two new holes for fastening the element to the oven wall. Change in design. Enlarged the holes in the spade connections since I was unable to find smaller bolts than 4-40. I would suggest to make the holes in the spade connections larger. The change out was not a problem.
Thore from Virginia Beach, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken baking (not broiling) element
I shut off the power at the circuit breaker. I loosened the screws securing the baking element to the back wall. I then pulled out the baking element toward me and found the wire leads bolted using self-tapping screws to the original element. Since the holes on the mounting tabs did not take the old screws, I had to drill out the holes on
... Read more the tabs of the replacement element. After securely bolting the leads to either terminal on the element, I had to drill two holes on the back wall for the mounting plate of the new element. Then I used the cordless drill with the Philips bit to drive in stainless steel self-tapping screws (not zip screws) to secure the element to the back wall. I turned on the power at the circuit breaker and reset the clock (mechanical).
Read less
Sean from Gettysburg, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bake elemement burned out & the clips for the top element were broken
The bake element basically just plugs in remove the two screws in the back with a nut driver pull the element out unplug the spade connectors and reconnect the new element . As far as the clips just snap them on to the top element and snap back in the holes at the top of the oven. Also very fast delivery less then 48 hours from orde
... Read morering to delivery
Turned off power. Removed two screws. Took out old element. Used pliers to remove connectors. Installed new element. Set screws. Turned on power. Works.
Eugene from San Rafael, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Short circuited/burned out upper bake element
This is a simple repair of the PS249249 UPPER BAKE ELEMENT requiring only a 1/4 in nut driver or socket wrench.
1. unplug the old element after removing the two screws holding the element in place. 2. Insert the new element in the electrical receptacle and reinsert the screws to secure the new element.
Make s
... Read moreure not to remove any insulation.
Read less
William from Centreville, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnrd -out heating elements
Turned AC off. Removed bracket screws and pulled out ac connections. Removed old element and reilstalled new element and set AC on.
deborah from poughquag, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
27 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
September 21, 2017
Will this heating element fit my appliance?
For model number JKP15WW1WW
Hi Pat,
Thank you for your question. Yes, this is actually the correct part for your model information. GE has removed the 0 between your Ws. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Audrae
February 26, 2020
Will this part be the correct size for my old oven? I need the heating element. It burned up during self cleaning.
For model number JRP24GOV1BB
Hello Audrae, thank you for your question. The bake element for this unit (lower element) is PartSelect Number: PS249249. This will fit your unit. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
October 5, 2023
What are the measurements of this element?
For model number JRS04
Hi Judy, thank you for contacting us. The approximate dimensions of this heating element are:
13.5 inches width, 15.75 inches length from mounting bracket to the end of the element, 2.875 inches length from bracket to the terminal end, 1.75 inches mounting holes center to center. We hope this information helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
April 2, 2019
Want to make sure that this is the correct bake element for my oven.
For model number JMP31W0W2WW
Hello Michael, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS8688123. Thank you for your inquiry, good luck with this repair!
Need baking heating element for this GE wall oven. In your search there is no "0" after the "g" does this matter
For model number JKP26G0P4BG
Hi Joe, thank you for your question. Yes, that would be correct. You no longer need that 0 in your model number. So this element would be the correct part for your model. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ellen
October 16, 2019
Looking for top broiler model # above. Serial # 5g573811q
For model number 9114042593
Hello Ellen, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS249244. Hope this helps!
My baking heat unit has gone out and will not heat. What baking heat unit will be a good replacement for my GE built in electric oven?
For model number JRP14G0P4BG
Hello David, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS249424. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Could the elements be the problem if the oven doesn't heat up enough? My oven reads 350 but temperature reads 220.
For model number JRS04BW1BB
Hello Jeanne, Thank you for the question. I Suggest testing the Oven Sensor, PartSelect Number PS236043. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!
Hello Carol and thanks for writing.
If the oven temperature is higher than the level set, then most likely the thermostat needs replacement. Heating elements: The oven can also overheat if there is a malfunction with its heating element. ... A problem with the sensor can cause the oven to overheat. We hope this helps. Please contact us anytime
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
December 28, 2019
What are the dimensions of this part and does it have smallish slide on connectors to the stove - part wb44k5013
For model number 6790-688031
Hi John, we cannot find parts based on part dimensions as even parts that are the same size can have small differences that make them incompatible with your model. However if you could supply your model number we would be happy to research the correct parts for you. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Element or Burner","title":"Element or Burner","url":"/Wall-Oven-Elements-and-Burners.htm"},{"position":2,"name":"WB44K5013","title":"WB44K5013","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
