This OEM-sourced broil element with push-on terminals is located on the roof of your oven cavity, providing heat from above to cook and heat your food. It requires a 240-volt power supply to function properly. The element measures 13 1/4 inches in width and has a length of 15 7/8 inches from the mounting bracket to the back. If you are experiencing issues like uneven broiling or lack of heat, it is likely that the broil element is faulty and needs replacement. Before starting the replacement process, ensure that you turn off the oven at the breaker panel and let it cool down. To carry out the repair, you will need a flathead screwdriver, nut driver, and pliers. Begin by removing the oven door and racks. Then, unscrew the mounting screws that hold the old element in place and disconnect its wiring. Carefully pull out the old element from the appliance. When installing the new element, slide the wire contacts onto the terminals, insert it into the designated slot, and secure it with its fasteners. The top of the element is held in place by fork-like support clips, which are sold separately from the element itself.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling | Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo.
Part# WB44K5009 replaces these:
AP2030967, 260838, WB44K5009, 344895
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
5.0
Filter By Rating:
5 Stars
19
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Douglas A - March 17, 2023
Verified Purchase
Easy repair - saved a LOT of money
Was going to buy a new stove but realized I could get the broil element and I saved a LOT of money. The replacement was super, super easy and worked like a charm!!
★★★★★
★★★★★
WALTER P - May 26, 2022
Verified Purchase
Part was identical to my old one. Just snapped it in. So easy!!!!!
The part was even better than the original. The coil was thicker. Seemed much more durable!!!
★★★★★
★★★★★
William S - August 1, 2021
Verified Purchase
great product
everything was great. would buy from them again
★★★★★
★★★★★
Douglas E - March 15, 2021
Verified Purchase
Right part, and easy install
The part was there sooner than I had expected. After turning power off to the stove, it took about 15 minutes to take out the old and install the new element.
★★★★★
★★★★★
James H - January 19, 2021
Verified Purchase
Easy
This part worked great and was very easy to change out. There were 2 screws to remove and the element slid out of the top clips. You have to gently pull the wires out until you can pull them off the ends of the element.
When I started the broiler after re-installing it smoked a little bit to start, so there must have been some residue from the factory. An oven clean cycle took care of that.
★★★★★
★★★★★
Nancy M - May 12, 2020
Verified Purchase
Just what we ordered.
It was just what we ordered. Correct part. Fast. We got it in then found out the board was fried in our wall oven. Got new oven coming. But your part was correct. Thank you.
★★★★★
★★★★★
John N - April 28, 2020
Verified Purchase
Easy Order and repair
All it took was the model # from our 20 y/o wall oven to find the precise replacement element on line , quick 2 day delivery and easy repair took about 20 minutes for my wife and I. Freshly baked bread was delicious. We are happy customers
★★★★★
★★★★★
Gerald M - March 26, 2020
Verified Purchase
Pleased with part and delivery
The part arrived quickly with no signs of damage. The power was already off so all I had to do was install the new part. It works great.
★★★★★
★★★★★
Marianne C - February 9, 2020
Verified Purchase
Easiest repair possible.
This product is identical to the original GE factory element. Actually, I think it IS made by GE. It took less than 15 minutes to install. All you need is a 1/4" socket or nut driver and a pair of pliers to disconnect the leads. Remember to turn off the power at the circuit breaker or unplug the oven. Fast shipping!
★★★★★
★★★★★
S J R - August 24, 2019
Verified Purchase
Easy fix
Fixed my problem quickly
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 23 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven top Broiler was broke
I pulled the old broiler from holding clamps. I unscrewed the 2 screws holding the old broiler, pulled it out very slowly while using clips to hold the wires from going back into the wall behind the oven. That’s very important, I then pulled the old broiler off and replaced the new one. First I secured the elements on the oven clips that
... Read morehold the element up, I reattach the new element, screwed the 2 screws back in. DONE My grandson helped, total time, maybe 15 minutes. Watch their video. Really easy, save money.
Read less
Alvin from CRYSTAL SPGS, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top (broiler) element melted in two.
Be sure to flip the breaker to the oven to the OFF position before doing anything. Take out the two screws at the back of the oven that hold the element. Carefully pull the element forewarn to expose the connections to the wires. Disconnect the element from the wiring connectors. Be careful not to damage the connectors or the wiring. Plug
... Read more the new element into the wiring connectors. Make sure you have the connections firmly in place. Push the wiring and connectors back into place. Replace the two screws. Make sure the element is resting in the spacers that keep it the correct distance from the top of the oven. Flip the breaker to the ON position, Turn the oven on Broil. The element should start turning a bright red. some fumes will come off the element. That is just oil from processing and handling. Your done!
Read less
Kenneth from PLANO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old broil element started burning with being on OFF position requiring need to turn off breaker and cut element in two to stop progression of burn
1. Turn breaker off at breaker box. 2.Disconnect old broil element. Pull electric wires out 3-4 inches from BACK of oven. Clamp wires or tie off so they do not retreat behind back oven wall. INSTALL wires to new element and secure back plate. Install NEW clamps to new element. Switch on breaker and check operation.
1) TURNED OFF THE POWER TO THE OVEN. 2) REMOVED THE TOP DOOR AND RACKS. 3) REMOVED THE 2- 1/4 HEAD HEX NUTS AND PULLED THE ELEMENT FORWARD ENOUGH TO EXPOSE THE ELECTRICAL CLIPS TO THE ELEMENT. REMOVED THE CLIPS WITH A PAIR OF NEEDLE NOSE AS ADDED GRIP. 4) PUT THE WIRE CLIPS ON THE NEW ELEMENT A
... Read moreND REVERSED THE ABOVE PROCEDURES.
Read less
HIDDEN HILLS from TONASKET, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out
It's so simple most people could mannage the repair. Turn oven off. Remove oven door and shelves. Use a nut driver to remove mounting screws. Pliers to pull quick connect terminated wires off element terminals. Use pliers to push connectors onto new element,wires may connect to either terminal. Nut driver for screws to mechanically mount
... Read more new element. Replace shelves and door. First time element gets hot it will burn off oils and dirt, not a problem but do it now not later.
Read less
John from Durham, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broil element
switched off power to oven, unscrewed old broiling unit and installed new one.
Maria from Costa Mesa, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burned out.
I spent half an hour finding my driver set. It took about 25 minutes to turn the power off, remove the racks and element and replace the new elements.
Harden from Lynchburg, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out broil element
.Received the part promptly. Installed it in about 30 minutes. With appliance servicemen, I figure I saved about $200.00 doing it myself. Thanks
Beverly from Baton Rouge, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the heating coil in convection oven
[1] squirted LiquidWrench on the 4 screws holding the convection fanblade rear cover in place. Used a socket and rachet to remove screws; the loosener really helped after 10+ years.
[2] the broken heating element was easy to remove. The two spade connectors however didn't have much free length;these wires wanted to retreat back
... Read more into the rear oven wall. [3] So i put a small binder clip from my desk supplies on each spade end, this left the connectors where I could grab them. [4]I used needle-nose pliers to firmly crimp the the spade connectors onto the new heating element; couldn't have made a firm placement with fingertip pressure alone. [5] I cleaned the oven door hinge area, oven bulb area, and other hard to reach spots with Simple Green and wipes.
Read less
Victoria from San Jose, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I researched the part number from partselect.com, ordered it and in less than a week (even in all the snow!) I had my part. Fifteen minutes later, my wife was broiling dinner! I repaired my broiler element without waiting on a repairman and for less than $50.00!
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Replaced the defective element with the new - all inless than fifteen minutes!
Elwood from Allen, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 21, 2018
Does this come with the attachment (3) clips?
For model number JKP56B0A2BB
Hi John, Thank you for the question. The clips are sold separately. The part number is Part Number: PS243701. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Eric Skidmore
May 6, 2019
My GE True temp broiler element burned out suddenly while using. What is the correct part # to order, and is it difficult to replace?
For model number JKP15WOA2WW
Hello Eric, thank you for inquiring. This Broil Element part PS249244 is the correct replacement for your model.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Esther
November 26, 2019
Will this broiling element work with my model number? Please let me know as I would like to order the part if it does work
For model number JRP15B0W5BB
Hello Esther, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS249244 for the top Broil Element int he oven. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hector
November 28, 2019
Why the new broil element I purchase from you has a wider diameter than the one my wall oven had?
For model number JRP14G0T1BB
Hello Hector, Thank you for the question. Checking the model number you ordered the correct top broil element for your appliance. At times the manufactures will make changes to the parts over time and they may appear different but should still fit and work on your appliance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
March 7, 2023
We are going to order Broil Element select number PS249244 and Baking Element PS249291. Do we need new screws or anything else or do we use the existing ones .
For model number JKP27BOA3BB
Hi Jim, thank you for reaching out. You will need screws, part number PS234427, for both heating elements. You will also need a single heating element support clip, part number PS243701, for the broil element. We hope this helps!
My oven is approximately 30 years old. Will this part fit my particular model?
For model number JKP17WP3WG
Hello Chuck, thank you for your question. Yes, this Broil element is the correct one. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ashley
January 22, 2024
I have an 1970's GE wall oven unit. I'm in search of the correct broil and bake elements. This look like it could be the right one. I was hoping you could point me in the right direction. Thanks so much!
For model number JK140R1HT
Hi Ashley, thank you for your inquiry. Our research has found, the correct part numbers for your model are PS249424 for the Bake Element and PS249411 for the Broil Element. We hope this helps.
Is wb44k5009 the correct broiler element for this oven?
For model number JKP15AOA2AA
Hello Nan, thank you for your question. Yes, Broil Element part PS249244 is the correct replacement for your model.
Was this helpful?
Thank you for voting!
B
March 11, 2018
I cannot find the broiler element for our GE profile drop in oven. Can you help?
For model number JMP31WC2WW
Hello B,
Thanks for your question. The broil element compatible with your model is part number PS249244. Your model contained an extra 0 as part of a series digit which can be removed for the correct model list.
I hope this helps.
Was this helpful?
Thank you for voting!
Timothy
March 7, 2019
Heating elements for top oven, upper and lower element part numbers?
For model number JRP28BJ1BB
Hello Timothy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS249244 for the top broil element and PartSelect Number: PS249249 for the bottom Bake element. Thank you for your inquiry, good luck with this repair!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Element or Burner","title":"Element or Burner","url":"/Wall-Oven-Elements-and-Burners.htm"},{"position":2,"name":"WB44K5009","title":"WB44K5009","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
